Impact of prefractionation using Gradiflow on two-dimensional gel electrophoresis and protein identification by matrix assisted laser desorption/ionization-time of flight-mass spectrometry

Prefractionation of protein samples prior to two-dimensional electrophoresis (2-DE) has the potential to increase the dynamic detection range for proteomic analysis. We evaluated a membrane-based electrophoretic separation technique (Gradiflow) for its ability to fractionate an exoproteome sample from the filamentous fungus Trichoderma reesei. The sample was separated on the basis of size and charge. Buffer optimization was found to be necessary for successful size fractionation. Fractionation by charge was used to resolve the sample into four fractions that were subjected to analysis by two-dimensional electrophoresis (2-DE). Enhanced detection of low-abundance proteins with selective removal of high-abundance species was achieved. Fractionated and unfractionated samples were examined for differences in the ability to identify proteins following 2-DE using trypsin in-gel digestion followed by peptide mass fingerprinting using matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). Fractionated samples showed marked improvement in protein identification ability and sequence coverage. This study demonstrates the utility of the Gradiflow for fractionation, resulting in an enhancement of resolution and characterization of a moderately complex proteome.     

Paired Electrolysis of Aldoses in a Divided Flow Cell

Simultaneous anodic oxidation and cathodic reduction of aldoses in a divided flow cell were studied. The stream of the anolyte was an aqueous solution containing D-glucose, sodium bromide, and sodium bicarbonate. The stream of the catholyte was also an aqueous solution containing xylose and sodium sulfite. The factors which affected both the anodic and cathodic reactions were studied. The results indicate that the flow rates and temperatures of the anolyte and the catholyte, concentrations of the aldoses, pH values and the material of electrodes significantly affect both anodic and cathodic yields. The selectivities of gluconic acid in the anode and xylitol in the cathode were very high. The power consumption of paired electrolysis in the flow system was less than paired electrolysis in a batch system.     

The molecular structure of tetrathiofulvalene-13C (TTF) from proton magnetic resonance studies using nematic solvents

The molecular structure of TTF dissolved in nematic liquid crystalline solvents has been determined from the proton magnetic resonance including couplings due to ¹³C in natural abundance. The molecule is puckered in a boat conformation with the SCHCHS planes making a dihedral angle of 13 ± 2° with the S₂C  CS₂ plane. The other structural parameters obtained are r_CH = 1.085 ± 0.014 Å and the angel CCH = 123.7 ± 1.5°.     

Simultaneous Determination of Oxytetra- cycline, Doxycycline, Tetracycline and Chlortetracycline in Tetracycline Antibiotics by High-Performance Liquid Chromatog- raphy with Fluorescence Detection

A simple, rapid and sensitive high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of oxytetracycline, doxycycline, tetracycline and chlortetracycline was developed, and successfully applied to the analysis of commercial tetracycline antibiotics. The separation was performed on a reverse-phase C₁₈ column with a gradient elution composed of methanol and sodium acetate buffer (containing disodium ethylenediaminetetraacetate and calcium chloride, pH 8.10) as the mobile phase, and fluorescence detection at 532 nm (excitation at 380 nm). The detection limits for oxytetracycline, doxycycline, tetracycline and chlortetracycline were 0.1, 0.5, 0.3 and 0.4 g L^–1, respectively. Data with respect to precision and accuracy were reported and discussed.     

Optimization of zinc phosphate coating on 7075-T6 aluminum alloy

A zinc phosphate coating process on 7075-T6 aluminum alloy has been significantly improved through a combined approach of titanium colloid pretreatment, pH level adjustment, fluoride additive and ZnO/H₃PO₄ ratio adjustment. In particular, optimum phosphate coatings were formed in coating baths with a ZnO/H₃PO₄ ratio of 0.205 and 0.256. Coating morphology studied by SEM reveals that the adjustment in the coating procedure produces an improved crystalline coating layer with high coverage and small grain size. For coatings formed in a bath with a ratio of 0.205, the coverage of the crystalline patches on top of the amorphous coating base is almost complete. The chemical composition of the coating layers has been characterized by XPS and SIMS. The crystalline and amorphous coating phases formed in the bath with a ratio of 0.205 were found to have compositions given schematically as Zn_x(PO₄) and Zn_xAl_y(PO₄), respectively. In contrast, neither coating phase formed in the bath with a ratio of 0.256 shows the presence of Al.     

The ring-closing metathesis of vinyl ethers with Grubbs'' catalyst for the synthesis of dihydropyrans

A series of acyclic vinyl ethers have been prepared and treated with Grubbs' ruthenium catalyst ((Cy₃P)₂RuCl₂=CHPh). Contrary to previous findings, it has been shown that certain vinyl ethers are excellent substrates for the ring closing metathesis with ruthenium based catalysts.     

Effect of oil substitution in chiral microemulsion electrokinetic chromatography

In a previous publication (Pascoe, R., Foley, J. P., Analyst 2002, 127, 710-714), a novel chiral microemulsion based on 1.0% w/v dodecoxycarbonylvaline (DDCV), 0.50% v/v ethyl acetate and 1.2% v/v 1-butanol, was shown to provide rapid enantiomeric separations of various pharmaceutical compounds. The two deficiencies noted with this method were that the peak shapes obtained were asymmetric and the efficiencies were lower than those previously obtained using DDCV micelles (Peterson, A. G., Ahuja, E. S., Foley, J. P., J. Chromatogr. B 1996, 683, 15-28). This study examines the use of three alternative low-interfacial-tension oils (methyl acetate, methyl propionate, and methyl formate), in combination with DDCV, to characterize their effect on the elution range, efficiency, resolution, and enantioselectivity of various pharmaceutical enantiomers. The oils were evaluated in both the same volume percentage and the same molar concentration as ethyl acetate in the original DDCV microemulsion system. Including ethyl acetate, a total of seven microemulsion systems were examined. For the compounds that were separated, average enantioselectivities ranged from 1.09 to 1.28, with corresponding efficiencies of 14,000-20,000. While some interesting differences were observed, ethyl acetate still proved to be the most advantageous in terms of enantioselectivity, resolution, and elution range.     

A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.     

Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .