Relationship between tetrahedron shape measures

Tetrahedron shape measures are used for evaluating the quality of tetrahedra in finite element meshes. Three shape measures, theminimum solid angle _min theradius ratio , and themean ratio , are discussed in this paper. A new formula for the computation of a solid angle of tetrahedron is derived. For different shape measures andv (with values 1), we establish a relationship between andv of the form wherec ₀,c ₁,e ₀, ande ₁ are positive constants. This means that if one measure approaches zero for a poorly-shaped tetrahedron, so does the other. Combined with the property that each measure attains a maximum value only for the regular tetrahedron, this means that the shape measures are equivalent.This work was partially supported by a grant from the Natural Sciences and Engineering Research Council of Canada.     

Chapter 15 DEA/AR analysis of the 1988–1989 performance of the Nanjing textiles corporation

This article employs new data envelopment analysis/assurance region (DEA/AR) methods to evaluate the efficiency of the 35 textile factories of the Nanjing Textiles Corporation (NTC), Nanjing, China. The returns to scale (RTS) of these factories were studied without assuming that the optimal DEA solutions were unique. All DMUs are identified with pointsE (Extreme Efficient),E (Efficient but not an extreme point) andF (Frontier but not efficient). We then further identify the nonfrontier DMUs with pointsNE, NE andNF according to whether they are projected onto a point inE, E, orF en route to evaluating their performances. All of the inefficient factories were in classNF and had unique optimal primal-dual solution pairs. Consequently, the solution pairs satisfy the strong complementary slackness condition (SCSC). Application of cone-ratio (CR) ARs reduced significantly the number of factories in classE, and showed that some AR-efficient factories were more flexible in adopting the mixture of central planning and market economies that China currently is trying to use. Also, linked-cone (LC) ARs were applied to measure maximum and minimum profit ratios. The SCSC multiplier space approach was utilized to analyze the sensitivity of the efficiency results to potential errors in the data with and without ARs. The results in this article suggest that collective units had a better performance than state-owned units in the two consecutive years analyzed.This paper was written while the author was at the School of Economics and Management, Southeast University, Nanjing 210018, P.R. China.     

Purification and characterization of recombinant murine endostatin in E. coli

Endostatin, a carboxyl-terminal fragment of collagen XVIII is known as an anti-angiogenic agent, that specifically inhibits the proliferation of endothelial cell and the growth of several primary tumor. We report here the purification and characterization of the recombinant murine endostatin (rmEndostatin) which was expressed in a prokaryotic expression system. This rmEndostatin has similar physiochemical properties of yeast-produced recombinant endostatin, and it also specifically inhibits the proliferation and migration of bovine capillary endothelial cells stimulated by basic fibroblast growth factor. The biological activity of rmEndostatin was also shown by its anti-angiogenic ability on the chorioallantoic membrane of chick embryo in vivo. In this article, we demonstrate the refolding and purification of rmEndostatin, expressed using E. coli system, to a biologically active and soluble form. In addition, these results confirm the activity of endostatin as a potent anti-angiogenic agent.     

Is it safe to have a laboratory test?

A recent US Institute of Medicine report indicated that up to 98,000 deaths and more than 1 million injuries occur each year in the United States due to medical errors. These include diagnostic errors, such as an error or delay in diagnosis, failure to employ indicated tests and the use of outmoded tests. Laboratory tests provide up to 80% of the information used by physicians to make important medical decisions, therefore it is important to determine how often laboratory testing mistakes occur, whether they cause patient harm, where they are most likely to occur in the testing process, and how to prevent them from occurring. A review of the literature and a US Quality Institute Conference in 2003 indicates that errors in laboratory medicine occur most often in the pre-analytical and post-analytical steps in the testing process, but most of the quality improvement efforts focus on improving the analytical process. Measures must be developed and employed to reduce the potential for mistakes in laboratory medicine, including better indicators for the quality of laboratory service. Users of laboratory services must be linked with the laboratorys information system to assist them with decisions about test ordering, patient preparation, and test interpretation. Quality assessment efforts need to be expanded beyond external quality assessment programs to encompass the detection of non-analytical mistakes and improving communication between the users of and providers of laboratory services. The actual number of mistakes in laboratory testing is not fully recognized, because no widespread process is in place to either determine how often mistakes occur or to systematically eliminate sources of error. We also tend to focus on mistakes that result in adverse events, not the near misses that cause no observable harm. The users of laboratory services must become aware of where testing mistakes can occur and actively participate in designing processes to prevent mistakes. Most importantly, healthcare institutions need to adopt a culture of safety, which is implemented at all levels of the organization. This includes establishing closer links between providers of laboratory services and others in the healthcare delivery system. This was the theme of a 2003 Quality Institute Conference aimed at making the laboratory a key partner in patient safety. Plans to create a permanent public–private partnership, called the Institute for Quality in Laboratory Medicine, whose mission is to promote improvements in the use of laboratory tests and laboratory services are underway.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Ultraviolet protection factors for clothing: an intercomparison of measurement systems

In recent years the need to standardize measurement protocols for quantifying the degree of ultraviolet radiation (UVR) protection provided by clothing has led to the introduction of a number of standards around the world. To date, these standards have specified spectral measurements of UVR transmission by clothing and fabrics. Development of a standard test method has become an important part of the testing process, and this article presents results from an intercomparison involving 10 independent testing laboratories and 11 different UVR transmission measurement instruments. In addition to comparing the measured ultraviolet protection factors (UPF), this intercomparison also incorporates detailed scan results from all 10 laboratories and highlights differences in performance of the various instruments in different wavelength regions. Careful examination of these differences can indicate where changes to the systems could be made to allow improvements both in equipment performance and in agreement of the final results. The variability in the measurements of UPF in this study suggest that the protection categories in standards may need to be broadened.     

Structures and cytotoxic properties of sponge-derived bisannulated acridines

A reinvestigation of sponge natural products from additional Indo-Pacific collections of Xestospongiacf. carbonaria and X. cf. exigua has provided further insights on the structures, biological activities, and biosynthetic origin of bisannulated acridines. These alkaloids include one known pyridoacridine, neoamphimedine (2), and three new analogues, 5-methoxyneoamphimedine (4), neoamphimedine Y (5), and neoamphimedine Z (6). A completely new acridine, alpkinidine (7), was also isolated. A disk diffusion soft agar assay, using a panel of five cancer cell lines (solid tumors and leukemias) and two normal cells, was used to evaluate the differential cytotoxicity (solid tumor selectivity) of the sponge semipure extracts and selected compounds including amphimedine (1), 2, 4, and 7. While all four compounds were solid tumor selective, 1 and 2 were the most potent and 4 was the most selective. The rationale used to characterize the new structures is outlined along with the related biosynthetic pathways envisioned to generate 2 and 7.     

Automated system for simultaneous analysis of delta(13)C, delta(18)O and CO(2) concentrations in small air samples

In this paper we present an automated system for simultaneous measurement of CO(2) concentration, delta(13)C and delta(18)O from small (<1 mL) air samples in a short period of time (approximately 1 hour). This system combines continuous-flow isotope ratio mass spectrometry (CF-IRMS) and gas chromatography (GC) with an inlet system similar to conventional dual-inlet methods permitting several measurement cycles of standard and sample air. Analogous to the dual-inlet method, the precision of this system increases with the number of replicate cycles measured. The standard error of the mean for a measurement with this system is 0.7 ppm for the CO(2) concentration and 0.05 per thousand for the delta(13)C and delta(18)O with four replicate cycles and 0.4 ppm and 0.03 per thousand respectively with nine replicate cycles. The mean offset of our measurements from NOAA/CMDL analyzed air samples was 0.08 ppm for the CO(2) concentration, 0.01 per thousand for delta(13)C and 0.00 per thousand for delta(18)O. A specific list of the parts and operation of the system is detailed as well as some of the applications for micrometeorological and ecophysiological applications.     

Rapid separation of pharmaceutical enantiomers using electrokinetic chromatography with a novel chiral microemulsion

A novel oil-in-water microemulsion incorporating the chiral surfactant dodecoxycarbonylvaline (DDCV) was used to achieve the rapid enantiomeric separation of pharmaceutical drugs by electrokinetic chromatography (EKC). Incorporation of DDCV into a microemulsion resulted in an elution range more than double that provided the micellar form of the surfactant aggregate. Interestingly, for the same compounds the enantioselectivity provided by the chiral DDCV microemulsions ranged from 1.06-1.30 for the neutral and cationic drugs, which was slightly higher than that provided by chiral DDCV micelles. The use of a low surface tension oil (ethyl acetate) permitted a much lower concentration of chiral surfactant to be employed; this, together with the use of a zwitterionic buffer (ACES) resulted in a very low conductivity microemulsion that allowed a higher separation voltage to be utilized, resulting in rapid enantiomeric separations (< 8 min.). Mobility matching of the buffer cation(s) was used to improve peak shape and efficiencies. In our limited survey of the phase diagram, the optimum composition of the microemulsion buffer was 1.0% (w/v) DDCV (30 mM), 0.5% (v/v) ethyl acetate, 1.2% (v/v) 1-butanol and 50 mM ACES buffer at pH 7.