Development of method for the speciation of inorganic iron in wine samples

In this paper, we proposed a procedure for the determination of iron(II) and total iron in wine samples employing molecular absorption spectrophotometry. The ligand used is 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (Br-PADAP) and the chromogenic reaction in absence or presence of ascorbic acid (reducing agent) allows the determination of iron(II) or total iron, respectively. The optimization step was performed using a multivariate technique (Box Behnken design) involving the factors pH, acid ascorbic concentration and reaction time.The method allows the determination of iron(II) and iron(III) in wine samples, with limits of detection and quantification 0.22 and 0.72 μg L⁻¹, respectively. The precision expressed as relative standard deviation (R.S.D.) was 1.43 and 0.56% (both, n = 11) for content of iron(II) in wine samples of 1.68 and 4.65 mg L⁻¹, and 1.66 and 0.87% (both, n = 11) for content of total iron in wine samples of 1.72 and 5.48 mg L⁻¹.This method was applied for determination of iron(II) and total iron in six different wine samples. In these, the iron(II) content varied from 0.76 to 4.65 mg L⁻¹ and from 1.01 to 5.48 mg L⁻¹ for total iron. The results obtained in the determination of total iron by Br-PADAP method were compared with those that were performed after complete acid digestion in open system and determination of total iron employing FAAS. The method of regression linear was used for comparison of these results and demonstrated that there is no significant difference between the results obtained with these two procedures.     

Probing supercritical water with the n-pi* transition of acetone: a Monte Carlo/quantum mechanics study

The n-pi(*) electronic transition of acetone is a convenient and important probe to study supercritical water. The solvatochromic shift of this transition in supercritical water (adopting the experimental condition of P=340.2 atm and T=673 K) has been studied theoretically using Metropolis NPT Monte Carlo (MC) simulation and quantum mechanics (QM) calculations based on INDO/CIS and TDDFT-B3LYP6-31+G(d) methods. MC simulations are used to analyze hydration shells, solute-solvent interaction, and for generating statistically relevant configurations for subsequent QM calculations of the n-pi(*) transition of acetone. The results show that the average number of hydrogen bonds between acetone and water is essentially 13 of that in normal water condition of temperature and pressure. But these hydrogen bonds have an important contribution in the solute stabilization and in the solute-solvent interaction. In addition, they respond for nearly half of the solvatochromic shift. The INDO/CIS calculations explicitly considering all valence electrons of the water molecules, using different solvation shells, up to the third shell (170 water molecules), give a solvatochromic shift of 670+/-36 cm(-1) in very good agreement with the experimentally inferred result of 500-700 cm(-1). It is found that the solvatochromic effect on n-pi(*) transition of acetone in the supercritical condition is essentially given by the first solvation shell. The time-dependent density-functional theory (TDDFT) calculations are also performed including all solvent molecules up to the third shell, now represented by point charges. This TDDFT-B3LYP6-31+G(d) also gives a good but slightly overestimated result of 825+/-65 cm(-1). For comparison the same study is also made for acetone in water at normal condition. Finally, all average results reported here are statistically converged.     

Hierarchical Stable Enzyme Microenvironments for High‐Temperature Stability in Amine Solvents

Several methods have been proposed for capturing the CO₂ emitted into the atmosphere by human activity. To date, mainly amine‐based absorption processes are currently among the more promising systems for post‐combustion CO₂ capture. Tertiary amine solvents obviate the need for a high solvent regeneration temperature and fast absorption can be achieved with the use of carbonic anhydrase (CA), as an activator. In this study, the capacity of CA immobilization on nanoporous microparticles hierarchically structured to enhance their stability in tertiary amines is investigated. These microstructures allow for an efficient supply and presentation of substrate in the non‐aqueous solvent to the enzyme catalytic center and the particles' large size is attractive to make separation and reuse facile. These hierarchically structured particles conserve 70% of their initial activity after 30 d at 50 °C in amine solvent, whereas the free enzyme shows no activity after 1 h in the same conditions. In this work, we have overcome the technical hurdle linked to the recovery of the biocatalyst after operation thereby reducing costs of the system and importantly these micro‐bioparticles have shown a remarkable increase of the thermal stability of CA in an amine‐based CO₂ sequestration solvent as determined by a para‐nitrophenyl acetate assay.     

Fluorescence Studies on New Potential Antitumoral Benzothienopyran-1-ones in Solution and in Liposomes

Fluorescence properties of four new potential antitumoral compounds, 3-arylbenzothieno[2,3-c]pyran-1-ones, were studied in solution and in lipid membranes of dipalmitoyl phosphatidylcholine (DPPC), egg yolk phosphatidylcholine (Egg-PC) and dioctadecyldimethylammonium bromide (DODAB). The 3-(4-methoxyphenyl)benzothieno[2,3-c]pyran-1-one (1c) exhibits the higher fluorescence quantum yields in all solvents studied. All compounds present a solvent sensitive emission, with significant red shifts in polar solvents for the methoxylated compounds. The results point to an ICT character of the excited state, more pronounced for compound 1c. Fluorescence (steady-state) anisotropy measurements of the compounds incorporated in liposomes of DPPC, DODAB and Egg-PC indicate that all compounds have two different locations, one due to a deep penetration in the lipid membrane and another corresponding to a more hydrated environment. In general, the methoxylated compounds prefer hydrated environments inside the liposomes. The 3-(4-fluorophenyl)benzothieno[2,3-c]pyran-1-one (1a) clearly prefers a hydrated environment, with some molecules located at the outer part of the liposome interface. On the contrary, the preferential location of 3-(2-fluorophenyl)benzothieno[2,3-c]pyran-1-one (1b) is in the region of lipid hydrophobic tails. Compounds with a planar geometry (1a and 1c) have higher mobility in the lipid membranes when phase transition occurs.     

Metabolic viability of Escherichia coli trapped by dielectrophoresis in microfluidics

The spatial and temporal control of biological species is essential in complex microfluidic biosystems. In addition, if the biological species is a cell, microfluidic handling must ensure that the cell's metabolic viability is maintained. The use of DEP for cell manipulation in microfluidics has many advantages because it is remote and fast, and the voltages required for cell trapping scale well with miniaturization. In this paper, the conditions for bacterial cell (Escherichia coli) trapping using a quadrupole electrode configuration in a PDMS microfluidic channel were developed both for stagnant and for in‐flow fluidic situations. The effect of the electrical conductivity of the fluid, the applied electric field and frequency, and the fluid‐flow velocity were studied. A dynamic exchange between captured and free‐flowing cells during DEP trapping was demonstrated. The metabolic activity of trapped cells was confirmed by using E. coli cells genetically engineered to express green fluorescent protein under the control of an inducible promoter. Noninduced cells trapped by negative DEP and positive DEP were able to express green fluorescent protein minutes after the inducer was inserted in the microchannel system immediately after DEP trapping. Longer times of trapping prior to exposure to the inducer indicated first a degradation of the cell metabolic activity and finally cell death.     

Viscosity of (C2-C14) 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquids in an extended temperature range

Dynamic viscosities of several members of the 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide, [C_nmim][NTf₂], ionic liquids family, with the cation alkyl side-chain length varying from 2 to 14 carbon atoms, have been measured in the 278.15 K to 393.15 K temperature range using two different apparatuses. To the best of our knowledge, it is the first time that such an extensive assessment of viscosity - in terms of the number of compounds of a single ionic liquid homologous series, of the broad range of temperature covered, and the use of two different experimental techniques - is reported. The use of two different instruments, using different methodologies, provides information about the uncertainties in the measurement of viscosity of ionic liquids, including its dependence on the presence of traces of water and other impurities. An extensive critical analysis of the deviations between the data measured in this work and those reported in literature has been carried out.     

Difference gel electrophoresis identifies differentially expressed proteins in endoscopically collected pancreatic fluid

Alterations in the pancreatic fluid proteome of individuals with chronic pancreatitis (CP) may offer insights into the development and progression of the disease. The endoscopic pancreatic function test (ePFT) can safely collect large volumes of pancreatic fluid that are potentially amenable to proteomic analyses using difference gel electrophoresis (DIGE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Pancreatic fluid was collected endoscopically using the ePFT method following secretin stimulation from three individuals with severe CP and three chronic abdominal pain (CAP) controls. The fluid was processed to minimize protein degradation and the protein profiles of each cohort, as determined by DIGE and LC-MS/MS, were compared. This DIGE-LC-MS/MS analysis reveals proteins that are differentially expressed in CP compared with CAP controls. Proteins with higher abundance in pancreatic fluid from CP individuals include: actin, desmoplankin, α-1-antitrypsin, SNC73, and serotransferrin. Those of relatively lower abundance include carboxypeptidase B, lipase, α-1-antichymotrypsin, α-2-macroglobulin, actin-related protein (Arp2/3) subunit 4, glyceraldehyde-3-phosphate dehydrogenase, and protein disulfide isomerase. Endoscopic collection (ePFT) in tandem with DIGE-LC-MS/MS is a suitable approach for pancreatic fluid proteome analysis; however, further optimization of our protocol, as outlined herein, may improve proteome coverage in future analyses.     

New long alkyl side-chain benzo[a]phenoxazines as micellisation probes

Several novel fluorescent benzo[a]phenoxazinium chlorides possessing a long aliphatic chain substituent at the 5-amino function of the heterocycle were efficiently synthesised. All compounds obtained absorbed and emitted at longer wavelengths with moderate to good fluorescent quantum yields. The photophysics of N-[10-methyl-5-(octylamino)-9H-benzo[a]phenoxazin-9-ylidene]ethanaminium chloride and N-[10-methyl-5-(dodecylamino)-9H-benzo[a]phenoxazin-9-ylidene]ethanaminium chloride was studied in Triton^® X-100 and in cetyltrimethylammonium bromide micellar media, demonstrating the capability of these fluorophores in detecting the micellisation process.     

Mechanical properties of polymer composites based on commercial epoxy vinyl ester resin and glass fiber

The effect of the addition of methyl ethyl ketone peroxide (MEKP) and cobalt naphthenate (CoNaph) on the mechanical behavior of epoxy vinyl ester resin (EVER) laminates has been investigated by using a factorial experimental design, in which the MEKP and NaphCo contents were varied. Previous results showed that there is an interaction effect between the process variables analysed on the mechanical properties evaluated. It was also observed that the MEKP/CoNaph ratio affected the tensile behavior of the EVER/glass fiber composites.