Pyracene‐Linked Bis‐Imidazolylidene Complexes of Palladium and Some Catalytic Benefits Produced by Bimetallic Catalysts

Two new palladium complexes with a pyracene‐linked bis‐imidazolylidene (pyrabim) group have been obtained and fully characterized. The related monometallic analogues were obtained from the coordination of an acetanaphthene‐supported N‐heterocyclic carbene (NHC). The catalytic properties of all complexes were studied in the acylation of aryl halides with hydrocinnamaldehyde, and in the Suzuki–Miyaura coupling of aryl halides and aryl boronic acids. The results show that the presence of a second metal in the dimetallic complexes induces some benefits in the catalytic behavior of the complexes. This effect is more pronounced in the Suzuki–Miyaura coupling, for which the dimetallic complexes exhibit significantly higher activity than their monometallic counterparts.     

Separation and determination of homogenous fatty alcohol ethoxylates by liquid chromatography with mulitstage mass spectrometry

Alcohol ethoxylates (AEs) are a significant component of a stream of surfactants directed to the aquatic environment. The aim of this work was the investigation of the dependence of the analytical signals of homogeneous AE homologues on liquid chromatography with tandem mass spectrometry conditions, as well as the separation of AEs from the water matrix and, on this basis, the development of an analytical procedure suitable for the determination of AEs in environmental samples. Homogeneous homologues containing dodecyl moiety and 2–9 oxyethylene subunits were investigated. The analytical signals of the investigated homologues were optimized in terms of concentration of ammonium acetate in the mobile phase (optimum 5 mM) and a column temperature (optimum 35°C) of the liquid chromatography with tandem mass spectrometry system. A separation of AEs from the water matrix by liquid–liquid extraction (ethyl acetate, chloroform) or solid‐phase extraction (C₁₈, styrene divinylbenzene, H‐RX) was investigated. In a model investigation, the best recoveries (>90%) were obtained with a styrene divinylbenzene cartridge eluted with a 1:1 mixture of chloroform and methanol. However, much worse recoveries were obtained from the river water sample. Better results were obtained for liquid–liquid extraction with ethyl acetate. Recoveries of 62–80% were obtained for homologues having 4–9 oxyethylene subunits, at the lowest spike.     

Callitriche cophocarpa — a new rich source of active phenolic compounds

This study was focused on the analysis of the contents (by HPLC-DAD) and antioxidant activity of phenolic compounds of aquatic higher plant Callitriche cophocarpa. The novelty of the work was: 1) the study of the species which is almost unknown in the context of investigations of bio-active compounds and, 2) the application of a unique L-band electron resonance spectroscopy (L-band EPR) to measure antioxidant activity of samples. The results were compared with those obtained for microalgae Chlorella and Spirulina which are widely distributed as the diet supplements. The obtained results are very promising with respect to the freeze-dried material of Callitriche, which revealed both high level of phenolic compounds (33 mg g^?1 dry weight) and antioxidant activity (0.14 g of reduced DPPH· g^?1 dry weight). An isoform of sinapic acid appeared to be the main fraction in this sample. The average content of the total phenolic compounds in Callitriche freeze-dried samples was ca. 43 or 25 times higher than in the case of the Chlorella or Spirulina samples, respectively. These samples showed also 16 times lower scavenging activity in relation to freeze-dried Callitriche material.      

Implementation of chemometric techniques for evaluation of antioxidant properties of Camellia sinensis extracts

In this study, antioxidant properties of commercial green teas and dietary supplements containing Camellia sinensis extracts were evaluated. Extracts were examined using two antioxidant assays (DPPH^· radical method and ABTS^·+ cation radical method). A Folin-Ciocalteu assay was used to evaluate the total polyphenol content in the extracts. In order to compare and characterize the investigated Camellia sinensis extracts, chemometric techniques based on fingerprint chromatograms, antioxidant activity and total polyphenol content were applied. Application of chemometric methods allowed for reduction of multidimensionality of the data set and grouped the samples into differentiable clusters. The relationship between the antioxidant activity and total polyphenol content was also assessed. The results indicated that extracts with the higher polyphenolic content exhibited the stronger antiradical activity against both DPPH^· radicals and ABTS^·+ cation radicals. The multivariate calibration technique (such as a tree regression algorithm) can be a useful tool for rapid determining the antioxidant activity of a herbal product based on its fingerprint chromatogram      

New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Structural Insights into the Interactions of Digoxin and Na+/K+-ATPase and Other Targets for the Inhibition of Cancer Cell Proliferation

Digoxin is a cardiac glycoside long used to treat congestive heart failure and found recently to show antitumor potential. The hydroxy groups connected at the C-12, C-14, and C-3′a positions; the C-17 unsaturated lactone unit; the conformation of the steroid core; and the C-3 saccharide moiety have been demonstrated as being important for digoxin’s cytotoxicity and interactions with Na⁺/K⁺-ATPase. The docking profiles for digoxin and several derivatives and Na⁺/K⁺-ATPase were investigated; an additional small Asn130 side pocket was revealed, which could be useful in the design of novel digoxin-like antitumor agents. In addition, the docking scores for digoxin and its derivatives were found to correlate with their cytotoxicity, indicating a potential use of these values in the prediction of the cancer cell cytotoxicity of other cardiac glycosides. Moreover, in these docking studies, digoxin was found to bind to FIH-1 and NF-κB but not HDAC, IAP, and PI3K, suggesting that this cardiac glycoside directly targets FIH-1, Na⁺/K⁺-ATPase, and NF-κB to mediate its antitumor potential. Differentially, digoxigenin, the aglycon of digoxin, binds to HDAC and PI3K, but not FIH-1, IAP, Na⁺/K⁺-ATPase, and NF-κB, indicating that this compound may target tumor autophagy and metabolism to mediate its antitumor propensity.     

Searching for Potential Markers of Glomerulopathy in Urine by HS-SPME-GC×GC TOFMS

Volatile organic compounds (VOCs) exiting in urine are potential biomarkers of chronic kidney diseases. Headspace solid phase microextraction (HS-SPME) was applied for extraction VOCs over the urine samples. Volatile metabolites were separated and identified by means of two-dimensional gas chromatography and time of flight mass spectrometry (GC × GC TOF MS). Patients with glomerular diseases (n = 27) and healthy controls (n = 20) were recruited in the study. Different VOCs profiles were obtained from patients and control. Developed methodology offers the opportunity to examine the metabolic profile associated with glomerulopathy. Four compounds found in elevated amounts in the patients group, i.e., methyl hexadecanoate; 9-hexadecen-1-ol; 6,10-dimethyl-5,9-undecadien-2-one and 2-pentanone were proposed as markers of glomerular diseases.     

Keratin Scaffolds Containing Casomorphin Stimulate Macrophage Infiltration and Accelerate Full-Thickness Cutaneous Wound Healing in Diabetic Mice

Impaired wound healing is a major medical challenge, especially in diabetics. Over the centuries, the main goal of tissue engineering and regenerative medicine has been to invent biomaterials that accelerate the wound healing process. In this context, keratin-derived biomaterial is a promising candidate due to its biocompatibility and biodegradability. In this study, we evaluated an insoluble fraction of keratin containing casomorphin as a wound dressing in a full-thickness surgical skin wound model in mice (n = 20) with iatrogenically induced diabetes. Casomorphin, an opioid peptide with analgesic properties, was incorporated into keratin and shown to be slowly released from the dressing. An in vitro study showed that keratin-casomorphin dressing is biocompatible, non-toxic, and supports cell growth. In vivo experiments demonstrated that keratin-casomorphin dressing significantly (p < 0.05) accelerates the whole process of skin wound healing to the its final stage. Wounds covered with keratin-casomorphin dressing underwent reepithelization faster, ending up with a thicker epidermis than control wounds, as confirmed by histopathological and immunohistochemical examinations. This investigated dressing stimulated macrophages infiltration, which favors tissue remodeling and regeneration, unlike in the control wounds in which neutrophils predominated. Additionally, in dressed wounds, the number of microhemorrhages was significantly decreased (p < 0.05) as compared with control wounds. The dressing was naturally incorporated into regenerating tissue during the wound healing process. Applied keratin dressing favored reconstruction of more regular skin structure and assured better cosmetic outcome in terms of scar formation and appearance. Our results have shown that insoluble keratin wound dressing containing casomorphin supports skin wound healing in diabetic mice.     

Characteristics of Dietary Fatty Acids Isolated from Historic Dental Calculus of the 17th- and 18th-Century Inhabitants of the Subcarpathian Region (Poland)

Dental calculus analysis can be a valuable source of archaeological knowledge, since it preserves not only microbial and host biomolecules but also dietary and environmental debris, as well as metabolic products likely originating from dietary and craft activities. Here we described GC-MS analysis of a set of historic dental calculus samples from the front teeth of the mandibles of seven individuals found in 17th- and 18th-century graves in the city of Rzeszow, located in South-eastern Poland. We have found that only saturated fatty acids, which are characteristic for fats of animal origin, were present in the tested samples. Our preliminary results indicate that the diet of modern-period inhabitants of Rzeszow was rich in animal products, such as meat and dairy products.     

How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.