Amorphous and ordered organosilicas functionalized with amine groups as sorbents of platinum (II) ions

Two groups of amine-functionalized organosilicas have been synthesized: amorphous polysiloxane xerogels (APX) and ordered mesoporous organosilicas (OMO) by co-condensation of tetraethoxysilane and appropriate alkoxysilanes: aminopropyltriethoxysilane and N-[3-(trimethoxysilyl)propyl]ethylenediamine. The obtained materials were characterized by sorption measurements, X-ray diffractometry, elemental analysis, transmission electron microscopy, and scanning electron microscopy. The OMO samples have well developed porous structure—the values of specific surface area are in the range 740–840 m²/g. While the APX samples are less porous having the corresponding values in the range 280–520 m²/g. The sizes of the ordered mesopores of OMO are in the range 5.9–6.5 nm while for the APX they are 2.9–12.1 nm indicating structural differences between both groups of the samples. All samples were tested as the sorbents of Pt(II) ions. The influence of various parameters such as pH, contact time, equilibrium concentration on Pt(II) adsorption ability onto prepared adsorbents was studied in detail. Additionally, the effect of chloride concentration on Pt(II) adsorption was investigated. The values of static sorption capacities were in the range of 32–102 mg_Pt(II)/g and 20–139 mg_Pt(II)/g for OMO and APX series, respectively.     

Controlled synthesis of graphene oxide/alumina nanocomposites using a new dry sol–gel method of synthesis

The present paper gives new insight into the problem of controlling the morphology of reduced graphene oxide/alumina (RGO/Al₂O₃) nanocomposites. The dry and simplified sol–gel methods of RGO/Al₂O₃ nanocomposite synthesis were compared and the influence of six key synthesis parameters on the morphology of the resulting nanocomposite powders was investigated to optimize the morphology of RGO/Al₂O₃ nanocomposites in terms of reducing the undesired agglomeration of RGO/Al₂O₃ nanocomposite flakes to a significant minority and obtaining the uniform coverage of RGO surface with Al₂O₃ nanoparticles. Our investigations indicate that, despite the high excess of Al₂O₃ used (95 wt%), the lowest RGO/Al₂O₃ flake agglomeration and the formation of a uniform layer composed of Al₂O₃ nanoparticles with the average size of 58 nm occurred only when 5 wt% of graphene oxide was used as a substrate for the deposition of Al₂O₃ nanoparticles together with triethyl aluminium as an Al₂O₃ precursor and dry hexane as the reaction environment. The resulting organic precursor was thermally decomposed at 280 °C for 3 h in air atmosphere (R4 reaction pathway). This was confirmed by the high BET-specific surface area (242.4 m²/g) and the high open porosity (0.7 cm³/g) of the obtained RGO(5 wt%)/Al₂O₃ nanocomposite. This is also the first study with a detailed discussion of the reactions expected to occur during the synthesis of an RGO/Al₂O₃ nanocomposite.     

Minimum Exposure Limits and Measured Relationships Between the Vitamin D,Erythema and International Commission on Non‐Ionizing Radiation Protection Solar Ultraviolet

The International Commission on Non‐Ionizing Radiation Protection (ICNIRP) has established guidelines for exposure to ultraviolet radiation in outdoor occupational settings. Spectrally weighted ICNIRP ultraviolet exposures received by the skin or eye in an 8 h period are limited to 30 J m^?2. In this study, the time required to reach the ICNIRP exposure limit was measured daily in 10 min intervals upon a horizontal plane at a subtropical Australian latitude over a full year and compared with the effective Vitamin D dose received to one‐quarter of the available skin surface area for all six Fitzpatrick skin types. The comparison of measured solar ultraviolet exposures for the full range of sky conditions in the 2009 measurement period, including a major September continental dust event, show a clear relationship between the weighted ICNIRP and the effective vitamin D dose. Our results show that the horizontal plane ICNIRP ultraviolet exposure may be used under these conditions to provide minimum guidelines for the healthy moderation of vitamin D, scalable to each of the six Fitzpatrick skin types.     

Methods of biological fluids sample preparation – biogenic amines,methylxanthines, water‐soluble vitamins

In recent years demands on the amount of information that can be obtained from the analysis of a single sample have increased. For time and economic reasons it is necessary to examine at the same time larger number of compounds, and compounds from different groups. This can best be seen in such areas as clinical analysis. In many diseases, the best results for patients are obtained when treatment fits the individual characteristics of the patient. Dosage monitoring is important at the beginning of therapy and in the full process of treatment. In the treatment of many diseases biogenic amines (dopamine, serotonin) and methylxanthines (theophylline, theobromine, caffeine) play an important role. They are used as drugs separately or in combination with others to support and strengthen the action of other drugs – for example, the combination of caffeine and paracetamol. Vitamin supplementation may be also an integral part of the treatment process. Specification of complete sample preparation parameters for extraction of the above compounds from biological matrices has been reviewed. Particular attention was given to the preparation stage and extraction methods. This review provides universal guidance on establishing a common procedures across laboratories to facilitate the preparation and analysis of all discussed compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Driving force and activation energy in air-gap membrane distillation process

The present study investigated the impact of the driving force (Δp) on the transport properties. All the experiments and calculations were performed for air-gap membrane distillation (AGMD). In the course of the experiments, it was found that an identical value of Δp could be attained by applying different values of feed and permeate temperatures. It was highlighted that constant values of water fluxes could be achieved using the constant driving force created by different temperatures. Moreover, the relation between \({J_{{{\rm{H}}_2}{\rm{O}}}}\) and 1/T_f was shown to be linear only for the \({J_{{{\rm{H}}_2}{\rm{O}}}}\) created at ΔT = T_f ? T_p > 35 K. This work’s significant finding was to highlight the limitation of the Arrhenius-type equation applied in the activation energy calculations.     

Liquid crystal assemblies in biologically inspired systems

In this paper, which is part of a collection in honour of Noel Clark’s remarkable career on liquid crystal (LC) and soft matter research, we present examples of biologically inspired systems, which form LC phases with their LC nature impacting biological function in cells or being important in biomedical applications. One area focuses on understanding network and bundle formation of cytoskeletal polyampholytes (filamentous actin, microtubules and neurofilaments (NFs)). Here, we describe studies on NFs, the intermediate filaments of neurons, which form open network nematic LC hydrogels in axons. Synchrotron small-angle-X-ray scattering studies of NF protein dilution experiments and NF hydrogels subjected to osmotic stress show that NF networks are stabilised by competing long-range repulsion and attractions mediated by the NF’s polyampholytic sidearms. The attractions are present both at very large inter-filament spacings, in the weak sidearm-interpenetrating regime, and at smaller inter-filament spacings, in the strong sidearm-interpenetrating regime. A second series of experiments will describe the structure and properties of cationic liposomes (CLs) complexed with nucleic acids (NAs). CL-NA complexes form liquid crystalline phases, which interact in a structure-dependent manner with cellular membranes enabling the design of complexes for efficient delivery of NA (DNA and RNA) in therapeutic applications.     

Color and Chemical Reactions of Selected Sesquiterpene Lactones and Ecdysones from Asteraceae on TLC Plates

JPC – Journal of Planar Chromatography – Modern TLC -     

DBD Dyes as Fluorescence Lifetime Probes to Study Conformational Changes in Proteins

Previously, [1,3]dioxolo[4,5‐f][1,3]benzodioxole (DBD)‐based fluorophores used as highly sensitive fluorescence lifetime probes reporting on their microenvironmental polarity have been described. Now, a new generation of DBD dyes has been developed. Although they are still sensitive to polarity, in contrast to the former DBD dyes, they have extraordinary spectroscopic properties even in aqueous surroundings. They are characterized by long fluorescence lifetimes (10–20 ns), large Stokes shifts (≈100 nm), high photostabilities, and high quantum yields (>0.56). Here, the spectroscopic properties and synthesis of functionalized derivatives for labeling biological targets are described. Furthermore, thio‐reactive maleimido derivatives of both DBD generations show strong intramolecular fluorescence quenching. This mechanism has been investigated and is found to undergo a photoelectron transfer (PET) process. After reaction with a thiol group, this fluorescence quenching is prevented, indicating successful bonding. Being sensitive to their environmental polarity, these compounds have been used as powerful fluorescence lifetime probes for the investigation of conformational changes in the maltose ATP‐binding cassette transporter through fluorescence lifetime spectroscopy. The differing tendencies of the fluorescence lifetime change for both DBD dye generations promote their combination as a powerful toolkit for studying microenvironments in proteins.     

Influence of relative humidity on the properties of examined materials by means of inverse gas chromatography

Inverse gas chromatography (IGC) at infinite dilution was applied to evaluate the surface properties of sorbents and the effect of different carrier gas humidity. They were stored in different environmental humidity – 29%, 40%, and 80%. The dispersive components of the surface free energy of the zeolites and perlite were determined by Schulz-Lavielle method, whereas their tendency to undergo specific interactions was estimated basing on the electron donor–acceptor approach presented by Flour and Papirer. Surface parameters were used to monitor the changes of the properties caused by the humidity of the storage environment as well as of RH of carrier gas. The increase of humidity of storage environment caused a decrease of sorbents surface activity and increase the ability to specific interaction.