Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Pertechnetyl Fluorosulfate, [TcO3]+[SO3F]−

A one step synthesis of [TcO₃]⁺[SO₃F]^? is reported. The compound is volatile at room temperature and has according to calculations a tetrahedral coordination around Tc and a monodentate SO₃F group. In the solid state the [SO₃F]^? anion bridges three [TcO₃]⁺ cations, and vice versa. Space group P2₁/c, Z = 4, lattice dimensions at 173 K: a = 695.4(11), b = 808.6(12), c = 893.3(14) pm, β = 97.36(8)°.     

Degradation Study of Polymers from Renewable Resources and their Compositions in Industrial Composting Pile

Summary: Polyesters produced from renewable resources and susceptible to hydrolysis under the industrial composting conditions offer ecological advantages as compared to thermoplastics polymers and elastomers produced from fossil carbon sources. In this paper the degradation behaviour of polymer compositions of BTA, PLA and a-PHB in natural environment of industrial composting pile, consisting of leaves - 40%, branches - 30% and grass - 30%, have been presented. The extend of degradation was monitored by macroscopic observations of sample surfaces, changes of molecular weight, polydispersity and composition of the tested materials and their weight loss.     

Surface-active, micellar, and antielectrostatic properties of bis-ammonium salts

A series of new cationic surfactants, bis-quaternary ammonium dibromides, were synthesized. The properties of these surfactants were characterized by surface tension measurements, conductivity study, and dynamic light scattering. The surface properties, such as surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), the effectiveness of surface tension reduction, gamma(min), critical micelle concentration, cmc, and standard free energy of micellization, DeltaG(mic)(0) and DeltaG(ads)(0), were obtained by means of surface tension measurements. The antielectrostatic properties were investigated by measuring the surface resistance, the half-charge decay time, and the maximum voltage induced on polyethylene films and propylene unwoven fabrics. Critical micellar concentrations (cmc) of investigated salts were much lower than those of the monomeric salt DTAC. The results obtained in this work were compared to analogous bis-quaternary ammonium dichlorides and well-known gemini cationic surfactants. It was found that the type of counterion had an impact on the values of the micelle ionization degree and the hydrodynamic diameters. Larger aggregates were found for bis-quaternary ammonium dibromides, which had smaller values of the ionization micelle degree than bis-quaternary ammonium dichlorides. Moreover, the antielectrostatic effect strongly depended on the kind of counterion. All investigated salts had very good antistatic properties.     

Breath figures in polymer and polymer blend films spin-coated in dry and humid ambience

We investigate effects of two spin-coating parameters, relative humidity (5% < or = RH < or = 80%) in ambient atmosphere and water content (3 wt % < or = f(H2O) < or = 20 wt %) in solution (rich in tetrahydrofuran), on the structure of breath figures (BF) formed in spin-cast films of polar poly(methyl methacrylate) (PMMA) and PMMA mixed with nonpolar polystyrene (PS). Film morphologies, examined with atomic and lateral force microscopy, are analyzed with integral geometry analysis to yield morphological BF measures. In PMMA, water added to solution has much stronger impact than that from moisture on formed BFs, which could be ordered (with conformational entropy S approximately 0.9-1.0). In PMMA/PS, BFs decorate exclusively polar PMMA domains, resulting in morphologies with two length scales (sub-micrometer BFs and domains >10 microm). This suggests a novel strategy for herarchic structure formation in multicomponent polymer films. In PS/PMMA, BFs are better developed than in pure PMMA spin-coated in identical conditions. These observations show that the air boundary layer facing the spin-cast polymer film (region) is more important than the ambient atmosphere.     

The effect of chronic ultraviolet radiation on the human immune system

A single or a limited number of UVR exposures is recognized to suppress cell-mediated immunity in human subjects. The complex pathway leading from the absorption of photons by chromophores in the skin to the generation of T regulatory cells has been, at least partially, elucidated. However, the effect of repeated UV exposures on immune responses and associated mediators is not well studied, particularly to assess whether they lead, first, to the development of photoprotection so that these immune changes are reduced or no longer occur, and, secondly, to the development of photoprotection against the normal downregulation of immunity induced by a high UV dose. For almost all the parameters evaluated in this review--epidermal DNA damage/erythema, urocanic acid, Langerhans and dendritic cells, natural killer cells, macrophages, mast cells, contact and delayed hypersensitivity responses--none, aside from epidermal DNA damage/erythema and macrophage phagocytic activity, show convincing evidence of photoadaptation or, where appropriate, photoprotection. It is concluded that repeatedly irradiating individuals with UVR is likely to continue to result in downregulation of immunity.     

Influence of the solvent description on the predicted mechanism of SN2 reactions

The influence of the implicit solvent model on transition state structures of two S N2 reactions of biochemical importance is presented. In the considered methyl transfer reaction, we show experimentally that the rate constant in blood serum is about 60% slower than in the aqueous solution and that the implicit solvent model with slightly modified parameters for water captures correctly the energetics of this reaction. With the example of the reaction between 4-methyl-1,2,4-triazol-3-thione and ethyl bromoacetate, we show that relative stabilities of the conformationally different transition states depend upon the solvent inclusion strategy.     

Photochemical stability of poly(vinyl pyrrolidone) in the presence of collagen

The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been studied by contact angle measurements. PVP samples and samples containing 1%, 3% and 5% of collagen were irradiated with UV light of wavelength λ = 254 nm in air for up to 24 h. The amount of gel created during UV irradiation was estimated.PVP in the presence of 1%, 3% and 5% of collagen is less stable both thermally and photochemically. Collagen enhances photochemical processes leading to crosslinking of PVP. The contact angle measurements and values of surface free energy showed that the wettability of PVP films was changed by the addition of collagen and by UV irradiation. The increase of polarity of samples indicates an efficient photooxidation on the surface upon UV irradiation.     

ToF‐SIMS spectrometry to observe fatty acid profiles of breast tissues in broiler chicken subjected to varied vegetable oil diet

This study is aimed to observe changes in fatty acid profiles by time of flight secondary ion mass spectrometry (ToF‐SIMS) in breast muscle tissues of broilers. Four different groups were identified. The source of fat in group I was soy oil (rich in linoleic acid, ω‐6), group II received linseed oil (ω‐3), and the third group was fed a mixture of the two mentioned oils. Broilers in the control group were fed with beef tallow, used in mass commercial production. The results reveal that the use of vegetable oils in animal nutrition determines the lipid profile of fatty acids. ToF‐SIMS measurements showed that the lipid profile of muscle fibers and intramuscular fat reflect the composition of fats used as feed additives. In both structures, the ratio of ω‐6/ω‐3 fatty acids, which is most favorable for human health, was found in the groups in which a mixture of vegetable oils and a supplement of linseed oil were used.