Study of Photochemical Reactions of Coniferyl Alcohol. II. Comparative Structural Study of a Photochemical and Enzymatic Polymer of Coniferyl Alcohol

The structure of the polymer synthesized by UV irradiation of coniferyl alcohol was studied, using UV-visible, Raman, IR, H-NMR and ¹³C-NMR spectroscopy. The photochemical polymer was compared with the structure of the polymer obtained by peroxidase-catalyzed polymerization of coniferyl alcohol. General similarity of the spectra of the two polymers was shown. However, differences in the fine structure of particular regions of the NMR spectra, as well as in certain bands in the Raman and IR spectra, could be explained through the various bond types and organization within the polymers. These results are consistent with molecular mass distribution of the polymers. Two fractions of enzymatic polymer correspond to the main two fractions of photochemical polymer. The later polymer has additional fractions that are probably the main reason for the observed spectral differences.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Solvatochromism of 3-[2-(aryl)benzoxazol-5-yl]alanine derivatives

The photophysical properties of N-Boc-3-[2-(9-anthryl)benzoxazol-5-yl]-l-alanine methyl ester (BoxAnt) and N-Boc-3-[2-[4-(9′-(10′-butyl)anthryl)phenyl]benzoxazol-5-yl]-l-alanine methyl ester (BoxPhAnt) were studied in a series of solvents. Their absorption spectra are less sensitive to the solvent polarity than the corresponding fluorescence spectra which show a pronounced solvatochromic effect leading to large Stokes shifts. Using an efficient solvatochromic method, based on the empirical solvent polarity parameter , a large change of the dipole moment on excitation for BoxPhAnt has been found. From an analysis of the solvatochromic behaviour of the absorption and fluorescence spectra in terms of bulk solvent polarity functions, f(_r, n) and g(n), a larger excited-state dipole moment (about 8 D, ψ = 56) was obtained for BoxPhAnt than for BoxAnt (about 3 D, ψ = 0). Both applied methods gave similar values of the excited-state dipole moments for both compounds studied.     

A Modular Approach to Atropisomeric Bisphosphines of Diversified Electronic Density on Phosphorus Atoms

The series of C₂-symmetric biaryl core-based non-racemic bisphosphines possessing substituents of different electronic properties: both EDG and EWG were obtained in a short sequence of good yielding transformations, started from commercial 1,3-dimethyl-2-nitrobenzene. Several different approaches leading to the desirable ligands were practically evaluated. Notably, the synthesis of the entire series of ligands could be performed with the utilization of a single early-stage precursor DIDAB (6,6′-diiodo-2,2′,4,4′-tetramethylbiphenyl-3,3′-diamine), which could be easily obtained in enantiomerically pure form. The obtained compounds at concentrations of 50 and 200 µM showed various biological activity against normal human dermal fibroblast, ranging from inactivity through time-dependent action and ending up with high toxicity.     

Antioxidative Properties and Acrylamide Content of Functional Wheat-Flour Cookies Enriched with Wild-Grown Fruits

This study aimed to evaluate the impact of widely grown fruits (wild roses, elderberries, sea buckthorns, rowans, chokeberries, and hawthorns) as a functional ingredient in wheat-flour cookie formulation on antioxidative properties with a simultaneous reduction of the carcinogen-like compound acrylamide. The organoleptic features of the cookies were assessed by a panel of consumers. The following parameters were measured: chemical composition, total polyphenols, polyphenolic profile, antioxidant activity, and acrylamide content. The overall ratings of the tested cookies with the addition of chokeberries, hawthorns, sea buckthorns, and elderberries were more than satisfactory, while wild rose and rowan cookies were the most widely accepted and best rated by the panelists. The antioxidant activity of the tested cookies was 1.1–15.22 μmol trolox·g⁻¹ dm and 2.46–26.12 μmol Fe (II)·g⁻¹ dm as measured by the ABTS and FRAP methods, respectively. All the fruit-enriched cookies had significantly higher antioxidative properties (p < 0.05) in comparison to the control cookies, but among the fruit-enriched cookies, there were differences in the quality and quantity of particular polyphenols. The acrylamide content was significantly decreased by 59% (hawthorn), 71% (rowan), 87% (wild rose), 89% (sea buckthorn), 91% (elderberry), and 94% (chokeberry) compared with the control cookies (p < 0.05). Cookies enriched with wild-grown fruits could constitute a promising novel snack food.     

Hemocompatibile Thin Films Assessed under Blood Flow Shear Forces

The aim of this study was to minimize the risk of life-threatening thromboembolism in the ventricle through the use of a new biomimetic heart valve based on metal–polymer composites. Finite volume element simulations of blood adhesion to the material were carried out, encompassing radial flow and the cone and plane test together with determination of the effect of boundary conditions. Both tilt-disc and bicuspid valves do not have optimized blood flow due to their design based on rigid valve materials (leaflet made of pyrolytic carbon). The main objective was the development of materials with specific properties dedicated to contact with blood. Materials were evaluated by dynamic tests using blood, concentrates, and whole human blood. Hemostability tests under hydrodynamic conditions were related to the mechanical properties of thin-film materials obtained from tribological tests. The quality of the coatings was high enough to avoid damage to the coating even as they were exposed up to maximum loading. Analysis towards blood concentrates of the hydrogenated carbon sample and the nitrogen-doped hydrogenated carbon sample revealed that the interaction of the coating with erythrocytes was the strongest. Hemocompatibility evaluation under hydrodynamic conditions confirmed very good properties of the developed coatings.     

Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl,NaOH, and KOH as Activating Agents

Cost-effective activated carbons for CO₂ adsorption were developed from molasses using H₂SO₄, H₃PO₄, HCl, NaOH, and KOH as activating agents. At the temperature of 0 °C and a pressure of 1 bar, CO₂ adsorption equal to 5.18 mmol/g was achieved over activated carbon obtained by KOH activation. The excellent CO₂ adsorption of M-KOH can be attributed to its high microporosity. However, activated carbon prepared using HCl showed quite high CO₂ adsorption while having very low microporosity. The absence of acid species on the surface promotes CO₂ adsorption over M-HCl. The pore size ranges that are important for CO₂ adsorption at different temperatures were estimated. The higher the adsorption temperature, the more crucial smaller pores were. For 1 bar pressure and temperatures of 0, 10, 20, and 30 °C, the most important were pores equal and below: 0.733, 0.733, 0.679, and 0.536 nm, respectively.     

Peptide-Drug Conjugates: A New Hope for Cancer Management

Cancer remains the leading cause of death worldwide despite advances in treatment options for patients. As such, safe and effective therapeutics are required. Short peptides provide advantages to be used in cancer management due to their unique properties, amazing versatility, and progress in biotechnology to overcome peptide limitations. Several appealing peptide-based therapeutic strategies have been developed. Here, we provide an overview of peptide conjugates, the better equivalents of antibody-drug conjugates, as the next generation of drugs for required precise targeting, enhanced cellular permeability, improved drug selectivity, and reduced toxicity for the efficient treatment of cancers. We discuss the basic components of drug conjugates and their release action, including the release of cytotoxins from the linker. We also present peptide-drug conjugates under different stages of clinical development as well as regulatory and other challenges.     

Phytochemical Analysis and Anti-Cancer Properties of Extracts of Centaurea castriferrei Borbás & Waisb Genus of Centaurea L

The Centaurea L. (Asteraceae) genus includes many plant species with therapeutic properties. Centaurea castriferrei Borbás & Waisb is one of the least known and least described plants of this genus. The aim of the study was the phytochemical analysis of water and methanol–water extracts (7:3 v/v) obtained from the aerial parts of the plant as well as evaluation of their anticancer activity. Quantitative determinations of phenolic compounds and flavonoids were performed, and the antioxidant potential was measured using the CUPRAC method. The RP-HPLC/DAD analysis and HPLC-ESI-QTOF-MS mass spectroscopy were performed, to determine the extracts’ composition. The antiproliferative activity of the obtained extracts was tested in thirteen cancer cell lines and normal skin fibroblasts using MTT test. Regardless of the extraction method and the extractant used, similar cytotoxicity of the extracts on most cancer cell lines was observed. However, the methanol–water extracts (7:3 v/v) contained significantly more phenolic compounds and flavonoids as well as showing stronger antioxidant properties in comparison to water extracts. Centaurea castriferrei Borbás & Waisb is a rich source of apigenin and its derivatives. In all tested extracts, chlorogenic acid and centaurein were also identified. In vitro research revealed that this plant may be a potential source of compounds with anticancer activity.