Synthesis, crystal structures and magnetic properties of M(II)Cu(II) chains (M = Mn and Co) with sterically hindered alkyl-substituted phenyloxamate bridging ligands

A series of neutral oxamato‐bridged heterobimetallic chains of general formula [MCu(L^x)₂(S)₂] ? p S ? q H₂O [p=0–1, q=0–2.5; L¹=N‐2,6‐dimethylphenyloxamate, S=DMF with M=Mn ( 1 a ) and Co ( 1 b ); L²=N‐2,6‐diethylphenyloxamate, S=DMF with M=Mn ( 2 a ) and Co ( 2 b ) or S=DMSO with M=Mn ( 2 c ) and Co ( 2 d ); L³=N‐2,6‐diisopropylphenyloxamate, S=DMF with M=Mn ( 3 a ) and Co ( 3 b ) or S=DMSO with M=Mn ( 3 c ) and Co ( 3 d )] were prepared by treating the corresponding anionic oxamatocopper(II) complexes [Cu(L^x)₂]^2? (x=1–3) with M²⁺ cations (M=Mn and Co) in DMF or DMSO as the solvent. The single‐crystal X‐ray structures of 2 a and 3 a reveal the occurrence of well‐isolated, zigzag, oxamato‐bridged manganese(II)–copper(II) chains. The intrachain Cu ??? Mn distances across the oxamato bridge are 5.3761(7) and 5.4002(17) Å for 2 a and 3 a , respectively, whereas the shortest interchain Mn ??? Mn distances are 9.4475(16) and 8.1649(14) Å for 2 a and 3 a , respectively. All of these M^IICu^II chains (M=Mn and Co) exhibit 1D ferrimagnetic behaviour with moderately strong intrachain antiferromagnetic coupling between the square‐planar Cu^II and octahedral high‐spin M^II ions across the oxamato bridge [?J=31.4–35.2 and 33.4–44.8 cm^?1, respectively; H =∑_i?J S _M,i( S _Cu,i+ S _Cu,i?1)]. Only the Co^IICu^II chains show slow magnetic relaxation effects characteristic of single‐chain magnets (SCMs). Analysis of the magnetic relaxation dynamics of 3 d shows a thermally activated mechanism (Arrhenius law dependence) with values of the pre‐exponential factor (τ₀=2.6×10^?9 s) and activation energy (E_a=7.7 cm^?1) that are typical of SCMs. In contrast, two relaxation regimes are observed for 2 d in different temperature regions (τ₀=3.2×10^?10 s and E_a=24.7 cm^?1 for T<4.5 K and τ₀=3.2×10^?14 s and E_a=37.5 cm^?1 for T>4.5 K).     

Copper(II) complexes of thioarylazo-pentanedione: Structures,magnetism, redox properties and correlation with DFT calculations

Copper(II) complexes of 3-((2-(alkylthio)phenylazo)-2,4-pentanedione, tridentate O, N, S donor ligands, are described in this work. Chloride bridged copper(II) polymers (1) and thiocyanato bridged copper(II) dimmers (2) are characterized by a single crystal X-ray diffraction study. The complexes show antiferromagnetic interactions, with J = −0.5 ± 0.1 cm⁻¹ (1a) and −25.8 ± 0.5 cm⁻¹ (2b), which implies stronger coupling in the –SCN-bridging compound. The spectra, redox and magnetism are explained by DFT studies.     

Electromechanical phase transition in hexacyanometallate nanostructure (Prussian Blue)

This paper demonstrates the importance of the structural changeover in controlling the physical-chemical properties of hexacyanometalate-like materials (Prussian Blue). A meticulous in situ study of compositional variations using electroacoustic impedance techniques associated to electrogravimetric techniques in hexacyanoferrates containing K+ alkali metals reveals the existence of a nanostructural changeover coupled to a change of the magnetic properties of these electromagnetic materials. In the same way, the electroacoustic impedance techniques can be useful both in the understanding and in the in situ monitoring of the structural changeovers and the magnetic behavior of all kinds of materials.     

Peptide Dimethylation: Fragmentation Control via Distancing the Dimethylamino Group

Direct reductive methylation of peptides is a common method for quantitative proteomics. It is an active derivatization technique; with participation of the dimethylamino group, the derivatized peptides preferentially release intense a₁ ions. The advantageous generation of a₁ ions for quantitative proteomic profiling, however, is not desirable for targeted proteomic quantitation using multiple reaction monitoring mass spectrometry; this mass spectrometric method prefers the derivatizing group to stay with the intact peptide ions and multiple fragments as passive mass tags. This work investigated collisional fragmentation of peptides whose amine groups were derivatized with five linear ω-dimethylamino acids, from 2-(dimethylamino)-acetic acid to 6-(dimethylamino)-hexanoic acid. Tandem mass spectra of the derivatized tryptic peptides revealed different preferential breakdown pathways. Together with energy resolved mass spectrometry, it was found that shutting down the active participation of the terminal dimethylamino group in fragmentation of derivatized peptides is possible. However, it took a separation of five methylene groups between the terminal dimethylamino group and the amide formed upon peptide derivatization. For the first time, the gas-phase fragmentation of peptides derivatized with linear ω-dimethylamino acids of systematically increasing alkyl chain lengths is reported. Figure

?     

Substituted m-phenylene bridges as strong ferromagnetic couplers for Cu(II)-bridge-Cu(II) magnetic interactions: new perspectives

Based on a combined theoretical-experimental study, we propose that substituted m-phenylene ligands (m-N-Phi-N) can act as tuneable strong ferromagnetic couplers connecting Cu(II) ions; a new complex presenting that bridge with J close to +15 cm(-1) has been suggested and synthesized.     

Very long-distance magnetic coupling in a dicopper(II) metallacyclophane with extended π-conjugated diphenylethyne bridges

Self-assembly of the rigid rodlike ligand N,N'-4,4'-diphenylethynebis(oxamate) (dpeba) and Cu(2+) ions affords a novel dinuclear copper(II) metallacyclophane (nBu(4)N)(4)[Cu(2)(dpeba)(2)]·4MeOH·2Et(2)O (1) featuring a very long intermetallic distance (r = 15.0 ?). Magnetic susceptibility measurements for 1 reveal a moderately weak but nonnegligible intramolecular antiferromagnetic coupling between the two metal centers across the double para-substituted diphenylethynediamidate bridge (J = -3.9 cm(-1); H = -JS(1)S(2), where S(1) = S(2) = S(Cu) = (1)/(2)). Density functional electronic structure calculations on 1 support the occurrence of a spin polarization mechanism.     

The behavior of the form factor in two dimensions for linear polymers in different regimes

Off-lattice Monte Carlo simulations employing the PIVOT algorithm are used to generate ideal and excluded volume linear polymers in two dimensions. The form factor at small and large wave vectors is calculated from the resulting configurations and compared to the exact equation for ideal chains and to both scaling and renormalization group predictions for excluded volume chains. It is found that using the des Cloizeaux form for the distance distribution function in an analytic calculation of the form factor leads to close agreement with the Monte Carlo data and that simple expressions for both the small and large wave vector expansions reproduce the essential features of the form factor.     

Phenyl- and cyclopentylimino derivatization for double bond location in unsaturated C<Subscript>37</Subscript>-C<Subscript>40</Subscript> alkenones by GC-MS

A method for the identification of double bond locations in polyunsaturated long chain alkenones adapted to nanogram amounts as currently analyzed by gas chromatography coupled to mass spectrometry (GC-MS) has been developed. The method is based on interpretation of the electron impact mass spectra of the imino derivatives of the carbonyl groups using either cyclopentyl or phenyl substitutents. Other complementary derivatization methods such as elaidization and hydrogenation have also been used for structural characterization of these compounds. This application has led to the identification of a novel homologous series of di-, tri-, and tetraunsaturated ketones with carbon number chain lengths between 37 and 40 in coastal hypersaline sediments. The novel series identified shows a distribution in which the double bond position between different homologs is established by reference to the distance from the carbonyl group whereas the previously known alkenones were constituted by unsaturated homologs with double bonds located at defined distances of the terminal methyl. This difference points out to a dissimilar, but still unknown, biogenic precursor of these novel alkenones.     

Targeting of cancer cells using click-functionalized polymer capsules

Targeted delivery of drugs to specific cells allows a high therapeutic dose to be delivered to the target site with minimal harmful side effects. Combining targeting molecules with nanoengineered drug carriers, such as polymer capsules, micelles and polymersomes, has significant potential to improve the therapeutic delivery and index of a range of drugs. We present a general approach for functionalization of low-fouling, nanoengineered polymer capsules with antibodies using click chemistry. We demonstrate that antibody (Ab)-functionalized capsules specifically bind to colorectal cancer cells even when the target cells constitute less than 0.1% of the total cell population. This precise targeting offers promise for drug delivery applications.