Über die dilatometrisch indizierten Titrationen

Dilatometrical indication can be employed to the neutralizing reactions of polybasic acids and is demonstrated by the following acid-base couples: H₂SO₄/NaOH, H₃PO₄/NaOH and H₅JO₆/NaOH. With amounts between 0.5 and 4 mMol several, frequently all, equivalence points can be determined with a deviation of less than 0.2%. The determination of the changes of molar volume of the reactions depending on the concentrations allow conclusions as to the course of the reactions.     

Preparation of β-hydroxyesters from isoxazolines. A selective Nibpy-catalyzed electrochemical method

An electrocatalytic method for the reductive N-O cleavage of isoxazolines is described. Ni⁰bpy, generated in situ, was used to promote selective ring opening of 3-methoxy-5-phenylisoxazoline (1a) and 3-methoxy-[4,5]cyclohexylisoxazoline (1b). DMF and NaI were used as solvent and supporting electrolyte, and β-hydroxyesters 2a and 2b were obtained in high yields respectively, after acid hydrolysis. β-Hydroxynitriles 3a and 3b were also identified as side products.     

Topography of the potential energy hypersurface and criteria for fast-ion conduction in perovskite-related A2B2O5 oxides

We discuss the importance of the topography of the potential energy hypersurface for the ionic conductivity of perovskite-related A(2)B(2)O(5) oxides. A correlation between the energetic preference of the cations for different coordination geometries and the ionic conductivity is proposed based on a first principles periodic density functional theory study of selected possible structures for Ba(2)In(2)O(5), Sr(2)Fe(2)O(5), Sr(2)Mn(2)O(5), and La(2)Ni(2)O(5). There are a large number of low-energy local minima on the potential energy hypersurfaces of the two first compounds due to an energetic preference for BO(4) tetrahedra. Tetrahedral environments are energetically unfavorable for Mn(III) in Sr(2)Mn(2)O(5) and for Ni(II) in La(2)Ni(2)O(5), and the number of low-energy configurations is relatively low in these two cases. Consistent with our findings, in contrast to Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5), Sr(2)Mn(2)O(5) and La(2)Ni(2)O(5) do not exhibit transitions to disordered phases on heating, and there appear to be no reports of enhanced ionic conductivity for these compounds. Thus we suggest that the possibility of many different oxygen orderings associated with a variety of low-energy connectivity schemes within tetrahedral layers such as in the brownmillerite-based structures of Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5) is a prerequisite for high ionic conductivity in perovskite-related A(2)B(2)O(5) oxides.     

STRUCTURE AND PHOTOBIOLOGICAL ACTIVITY OF 7-CHLORO-1,4-BENZODIAZEPINES. STUDIES ON THE PHOTOTOXIC EFFECTS OF CHLORDIAZEPOXIDE, DESMETHYLCHLORDIAZEPOXIDE AND DEMOXEPAM USING A BACTERIAL INDICATOR SYSTEM

The photobiological activity of chlordiazepoxide, an active ingredient of the drug Librium, which is known to induce phototoxic effects, and two of its metabolites, desmethylchlordiazepoxide and demoxepam, was investigated. Upon irradiation of these biologically active compounds with longwave UV light, the main decomposition product formed is an oxaziridine. Using a strain of Salmonella typhimurium as a test organism for cytotoxicity, it could be demonstrated that not only the drug itself, but also the major mammalian metabolites are phototoxic and, furthermore, that the respective oxaziridines are responsible for the toxic effects found upon irradiation. A close relationship appears to exist between the phototoxicity of the nitrones and the toxicity in the dark of their respective oxaziridines. Investigations of the photobiological activity of a few closely structurally related benzodiazepines could establish that a 4-oxide moiety in the benzodiazepine nucleus is the structural characteristic responsible for the appearance of phototoxicity; in those compounds which contain a 4-oxide in the benzodiazepine nucleus, photo-decomposition to a toxic oxaziridine is observed, while the analogues lacking the 4-oxide moiety do not show this characteristic and, therefore, no phototoxic effects can be observed. Finally, mutagenicity tests performed with the same bacterial indicator as used for phototoxic studies, and including chlorpromazine as a positive reference compound, indicate that under the present experimental conditions photoproducts formed upon irradiation of chlordiazepoxide and its metabolites with longwave UV light do not exert a mutagenic effect.     

A combined theoretical and experimental study of efficient and fast titanocene-catalyzed 3-exo cyclizations

The mechanism of titanocene mediated 3-exo cyclizations was investigated by a combined theoretical and experimental study. A gradient corrected density functional theory (DFT) method has been scaled against titanocene dichloride, the parent butenyl radical, and in bond dissociation energy (BDE) calculations. The BP86 method using density fitting, and a basis set of triple-zeta quality emerged as a highly reliable tool for studying titanocene mediated radical reactions. The computational results revealed important kinetic and thermodynamic features of cyclopropane formation. Surprisingly, the beta-titanoxy radicals, the first intermediates of our investigations, were demonstrated to possess essentially the same thermodynamic stabilization as the corresponding alkyl radicals by comparison of the calculated BDEs. In contrast to suggestions for samarium mediated reactions, the cyclization was shown to be thermodynamically favorable in agreement with earlier kinetic studies. It was established that stereoselectivity of the cyclization is governed by the stability of the intermediates and thus the trans disubstituted products are formed preferentially. The observed ratios of products are in good to excellent agreement with the DFT results. By a combination of computational and experimental results, it was also shown that for the completion of the overall cyclopropane formation the efficiency of the trapping of the cyclopropylcarbinyl radicals is decisive.     

Characterization of iron-silicon thin films by means of electron diffraction and X-ray spectroscopy

Iron-silicon thin films have been characterized by means of analytical transmission electron microscopic methods. Under certain conditions — composition and annealing temperature — these films exhibit thermoelectric behavior. In particular, the morphology and phase formation which results from annealing of these films, and doping with oxygen and nitrogen, are of interest. The thermoelectric phase -FeSi₂ is formed at temperatures above 500°C. This phase is transformed into electrically conducting phases at about 1000°C. A small oxygen content does not influence this crystallization process. If the oxygen content is higher than 15 atom-% the electrically conducting phases exist even at 500°C. The presence of a small nitrogen content inhibits the formation of the -FeSi₂ phase. The development of silicon and iron nitrides is possible.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Polymer melt flow measurements by laser doppler velocimetry

Laser Doppler velocimetry (LDV) is a new tool for fluid dynamics studies. Using LDV the velocity vector field can be measured without disturbing the flow itself. However, in polymer melt fluid dynamics difficulties arise because of temperature problems, the relatively high pressure involved, and the often extremely slow flows. In this paper a LDV system is described which was set up especially for polymer melt flow investigations.     

Semiconductor gas sensors in bioreactor control

A simple semiconductor gas sensor (TGS 812) is used for the on-line measurement and control of indole during the production of l-tryptophan from indole and l-serine with immobilized E. coli cells. Indole is estimated in the reactor gas space. In combination with an automatic indole supply system, a feed-batch process became possible. The indole concentration was monitored and kept within the optimal range (300–600 mg l^?1). A simple gas-sensing electrode dipped in the reaction medium provides direct measurement of organic solvents and gases in the liquid. Such a system is suitable for on-line determination of ethanol (10–70 g l^?1) during continuous production of ethanol with immobilized yeast cells.