Extraction of proteins from plant tissues for two-dimensional electrophoresis analysis

To increase the number of proteins detectable by two-dimensional electrophoresis (2-DE) in plants, we present a new procedure for extracting total proteins from plant tissue. This method avoids any loss of proteins in the course of sample preparation and results in two different fractions, one comprising mainly the cytoplasmatic proteins, the other one containing predominantly structure bond proteins. 2-DE patterns obtained from these two fractions show that the total number of different protein spots detected exceeds the degree of resolution commonly reported for plant proteins threefold.     

SINGLE- and DOUBLE-STRAND BREAK FORMATION IN DOUBLE-STRANDED DNA UPON NANOSECOND LASER-INDUCED PHOTOIONIZATION

Double-stranded (ds) calf thymus DNA (0.4 mM), excited by 20 ns laser pulses at 248 nm, was studied in deoxygenated aqueous solution at room temperature and pH 6.7 in the presence of a sodium salt (10 mM). The quantum yields for the formation of hydrated electrons (phi c-), single-strand breaks (phi ssb) and double-strand breaks (phi dsb) were determined for various laser pulse intensities (IL). phi c- and phi ssb increase linearly with increasing IL; however, phi ssb has a tendency to reach saturation at high IL (greater than 5 X 10(6) Wcm-2). The ratio phi ssb/phi c-, representing the number of ssb per radical cation, is about 0.08 at IL less than or equal to 5 X 10(6) Wcm-2. For comparison, the number of ssb per OH radical reacting with dsDNA is 0.22. On going from argon to N2O saturation, phi ssb and phi dsb become larger by factors of approximately 5 and 10-15, respectively. This enhancement is produced by attack on DNA bases by OH radicals generated by N2O-scavenging of the photoelectrons. While phi ssb is essentially independent of the dose (Etot), phi dsb depends linearly on Etot in both argon- and N2O-saturated solutions. The linear dependence of phi dsb implies a square dependence of the number of dsb on Etot. This portion of dsb formation is explained by the occurrence of two random ssb, generated within a critical distance (h) in opposite strands. For both argon- and N2O-saturated solutions h was found to be of the order of 40-70 phosphoric acid diester bonds. On addition of electron scavengers such as 2-chloroethanol (or N2O plus t-butanol), phi dsb is similar to that in neat, argon-saturated solutions. Thus, hydrated electrons are not involved in the chemical pathway leading to laser-pulse-induced dsb of DNA.     

Atomization of Al in a tungsten coil electrothermal atomic absorption spectrophotometer

Electrothermal atomic absorption spectrophotometry of Al in a tungsten coil atomizer was evaluated and applied for its determination in hemodialysis fluid. The system was mounted on a Varian Spectra AA-40 spectrophotometer with continuum background correction and all measurements, in peak height absorbance, were done at 309.3 nm. The purge gas was a mixture of 90% Ar plus 10% H(2). Observation height, gas flow, drying, pyrolysis and atomization steps were optimized. The heating program was carried out by employing a heating cycle in four steps: dry, pyrolysis, atomization and clean. The determination of Al in hemodialysis solutions was performed by using a matrix-matching procedure. Al in hemodialysis solutions was determined by TCA and by electrothermal atomization with a graphite tube atomizer. There is no differences between results obtained by both methods at a confidence level of 95%. The characteristic mass of Al by using the TCA was 39 pg and the detection limit was 2.0 mug l(-1).     

Über die dilatometrisch indizierten Titrationen

Dilatometrical indication can be employed to the neutralizing reactions of polybasic acids and is demonstrated by the following acid-base couples: H₂SO₄/NaOH, H₃PO₄/NaOH and H₅JO₆/NaOH. With amounts between 0.5 and 4 mMol several, frequently all, equivalence points can be determined with a deviation of less than 0.2%. The determination of the changes of molar volume of the reactions depending on the concentrations allow conclusions as to the course of the reactions.     

Preparation of β-hydroxyesters from isoxazolines. A selective Nibpy-catalyzed electrochemical method

An electrocatalytic method for the reductive N-O cleavage of isoxazolines is described. Ni⁰bpy, generated in situ, was used to promote selective ring opening of 3-methoxy-5-phenylisoxazoline (1a) and 3-methoxy-[4,5]cyclohexylisoxazoline (1b). DMF and NaI were used as solvent and supporting electrolyte, and β-hydroxyesters 2a and 2b were obtained in high yields respectively, after acid hydrolysis. β-Hydroxynitriles 3a and 3b were also identified as side products.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

A combined theoretical and experimental study of efficient and fast titanocene-catalyzed 3-exo cyclizations

The mechanism of titanocene mediated 3-exo cyclizations was investigated by a combined theoretical and experimental study. A gradient corrected density functional theory (DFT) method has been scaled against titanocene dichloride, the parent butenyl radical, and in bond dissociation energy (BDE) calculations. The BP86 method using density fitting, and a basis set of triple-zeta quality emerged as a highly reliable tool for studying titanocene mediated radical reactions. The computational results revealed important kinetic and thermodynamic features of cyclopropane formation. Surprisingly, the beta-titanoxy radicals, the first intermediates of our investigations, were demonstrated to possess essentially the same thermodynamic stabilization as the corresponding alkyl radicals by comparison of the calculated BDEs. In contrast to suggestions for samarium mediated reactions, the cyclization was shown to be thermodynamically favorable in agreement with earlier kinetic studies. It was established that stereoselectivity of the cyclization is governed by the stability of the intermediates and thus the trans disubstituted products are formed preferentially. The observed ratios of products are in good to excellent agreement with the DFT results. By a combination of computational and experimental results, it was also shown that for the completion of the overall cyclopropane formation the efficiency of the trapping of the cyclopropylcarbinyl radicals is decisive.     

Characterization of iron-silicon thin films by means of electron diffraction and X-ray spectroscopy

Iron-silicon thin films have been characterized by means of analytical transmission electron microscopic methods. Under certain conditions — composition and annealing temperature — these films exhibit thermoelectric behavior. In particular, the morphology and phase formation which results from annealing of these films, and doping with oxygen and nitrogen, are of interest. The thermoelectric phase -FeSi₂ is formed at temperatures above 500°C. This phase is transformed into electrically conducting phases at about 1000°C. A small oxygen content does not influence this crystallization process. If the oxygen content is higher than 15 atom-% the electrically conducting phases exist even at 500°C. The presence of a small nitrogen content inhibits the formation of the -FeSi₂ phase. The development of silicon and iron nitrides is possible.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001