Electrochemical characterisation of a Zn/(PEO)4ZnCl2/Nb2O5 solid-state cell

The (PEO)₄ZnCl₂ electrolyte (PEO, polyethylene oxide) was studied in view of its potential application in a solid-state rechargeable zinc cell. The electrochemical stability window was established, and decomposition voltage values between 3.19 (20 °C) and 1.44 V (150 °C) were estimated. Cyclic voltammetry studies using a Pt/(PEO)₄ZnCl₂/Pt cell indicated reversibility of the Zn²⁺/Zn couple at the electrode/electrolyte interface. Laboratory cells Zn(−)/(PEO)₄ZnCl₂/Nb₂O₅(+) were assembled and studied at 55 °C, under various discharge current densities. Results of cell discharge profiles, capacity values, charge–discharge cycles and cell stabilities are reported.     

Characterization by electrospray ionization and tandem mass spectrometry of rhamnolipids produced by two Pseudomonas aeruginosa strains isolated from Brazilian crude oil

In this work, biosurfactants produced by two Pseudomonas aeruginosa strains isolated from Brazilian crude oils were identified by proton nuclear magnetic resonance ((1)H NMR) and further characterized by mass spectrometry (MS) coupled with electrospray ionization (ESI) and tandem mass spectrometry (MS/MS) analysis in positive mode and their surface activities evaluated. Mono-rhamnolipids and di-rhamnolipids were identified for both isolates, but the most abundant were found to be mono-rhamnolipids. The similarity of rhamnolipids produced by the two strains was in good agreement with their surface activities. Both biosurfactants exhibited similar aqueous solution surface tensions, high emulsification indexes and critical micelle concentration values. The results obtained show that ESI-MS and MS/MS analysis alone provide a fast and highly specific characterization of biosurfactants produced by microbial strains.     

Kinetics and thermodynamics of chlorpromazine interaction with lipid bilayers: effect of charge and cholesterol

Passive transport across cell membranes is the major route for the permeation of xenobiotics through tight endothelia such as the blood–brain barrier. The rate of passive permeation through lipid bilayers for a given drug is therefore a critical step in the prediction of its pharmacodynamics. We describe a detailed study on the kinetics and thermodynamics for the interaction of chlorpromazine (CPZ), an antipsychotic drug used in the treatment of schizophrenia, with neutral and negatively charged lipid bilayers. Isothermal titration calorimetry was used to study the partition and translocation of CPZ in lipid membranes composed of pure POPC, POPC:POPS (9:1), and POPC:Chol:POPS (6:3:1). The membrane charge due to the presence of POPS as well as the additional charge resulting from the introduction of CPZ in the membrane were taken into account, allowing the calculation of the intrinsic partition coefficients (K(P)) and the enthalpy change (ΔH) associated with the process. The enthalpy change upon partition to all lipid bilayers studied is negative, but a significant entropy contribution was also observed for partition to the neutral membrane. Because of the positive charge of CPZ, the presence of negatively charged lipids in the bilayer increases both the observed amount of CPZ that partitions to the membrane (KP(obs)) and the magnitude of ΔH. However, when the electrostatic effects are discounted, the intrinsic partition coefficient was smaller, indicating that the hydrophobic contribution was less significant for the negatively charged membrane. The presence of cholesterol strongly decreases the affinity of CPZ for the bilayer in terms of both the amount of CPZ that associates with the membrane and the interaction enthalpy. A quantitative characterization of the rate of CPZ translocation through membranes composed of pure POPC and POPC:POPS (9:1) was also performed using an innovative methodology developed in this work based on the kinetics of the heat evolved due to the interaction of CPZ with the membranes.     

Bioprocessing of sweet sorghum within situ-produced enzymes

Applied Biochemistry and Biotechnology - Enzyme-assisted ensiling (ENLAC), usingin situ-produced enzymes fromGliocladium sp. TUB-F-498, preserved 80% of the sugar content of sweet sorghum, and...     

Interaction and lipid-induced conformation of two cecropin-melittin hybrid peptides depend on peptide and membrane composition

The interaction of two hybrid peptides of cecropin A and melittin [CA(1-8)M(1-18) and CA(1-7)M(2-9)] with liposomes was studied by differential scanning calorimetry (DSC), circular dichroism (CD), and quasi-elastic light scattering (QELS). The study was carried out with large unilamellar vesicles (LUVs) of three different lipid compositions: 1,2-dimyristoil-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DMPG) and a binary mixture of DMPC/DMPG, in a wide range of peptide-to-lipid (P:L) molar ratios (0 to 1:7). DSC results indicate that, for both peptides, the interaction depends on membrane composition, with very different behavior for zwitterionic and anionic membranes. CD data show that, although the two peptides have different secondary structures in buffer (random coil for CA(1-7)M(2-9) and predominantly beta-sheet for CA(1-8)M(1-18)), they both adopt an alpha-helical structure in the presence of the membranes. Overall, results are compatible with a model involving a strong electrostatic surface interaction between the peptides and the negatively charged liposomes, which gives place to aggregation in the gel phase and precipitation after a threshold peptide concentration. In the case of zwitterionic membranes, a progressive surface coverage with peptide molecules destabilizes the membrane, eventually leading to membrane disruption. Moreover, delicate modulations in behavior were observed depending on the peptide.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Density-functional study of mechanisms for the cofactor-free decarboxylation performed by uroporphyrinogen III decarboxylase

Uroporphyrinogen III decarboxylase catalyzes the fifth step in heme biosynthesis: the elimination of carboxyl groups from the four acetate side chains of uroporphyrinogen III to yield coproporphyrinogen III. The enzyme acts by successively protonating each of the four pyrrole rings present in the substrate, thereby allowing decarboxylation of their side chains, but the identity of the proton donors has not been established yet. Tyr164 has been suggested as a proton donor, and Asp86 has been proposed to act either as a proton donor or as an intermediate-stabilizing residue. We have performed density-functional calculations to study this reaction mechanism, and found that the rate-limiting step is substrate protonation, rather than decarboxylation. Surprisingly, whereas Tyr164 is unable to protonate the substrate, this protonation can be effected by a nearby arginine residue (Arg37), with a free energy barrier of 21.4 kcal.mol(-1), in remarkable agreement with the experimental value of 19.5 kcal.mol(-1). The central positioning of this residue in close proximity to all four pyrrole rings in the substrate may play a key role in the sequential activation of each of these moieties.     

Thermal and evolved gas analyses of the oxidation of a cellulose/copper(II) oxide mixture

Cellulosic biomass is a promising alternative energy resource from the viewpoint of sustainability. The use of waste materials as cellulosic biomass could additionally contribute to a recycling society. It is thus essential to develop safer processes in order to expand utilization of cellulosic biomass as a useful resource in the future. For example, in some cases, construction wastes contain wood preservatives, including metal oxides that can act as catalysts for the oxidation of organic materials. Copper(II) oxide (CuO) is a major component in wood preservatives and is known to catalyze the oxidation of cellulose. There is, therefore, possibility for spontaneous ignition within large piles of wood chips from construction wastes. In this study, we focused on the thermal behavior of a cellulose/CuO mixture, measured using a Calvet-type heat flux calorimeter. In addition, Fourier transform infrared spectroscopy and gas chromatography were applied to analyze the oxidative decomposition gases of the cellulose/CuO mixture, and a reaction mechanism was proposed. It was revealed that CuO promotes the oxidative decomposition of cellulose and increases the quantity of the gases that evolved from cellulose with a catalytic cycle. The influence of CuO on oxidation of cellulose is greater at lower temperatures and spontaneous ignition, fires, and explosions are likely to increase when wood chips containing CuO are stored for long periods of time.     

Physical Adsorption of H2S Related to the Conservation of Works of Art: The Role of the Pore Structure at Low Relative Pressure

The adsorption isotherms of H₂S in selected adsorbents were determined at 298 K, at relative pressures up to about 0.005, aiming the use of these materials in the removal of that pollutant from the museums atmosphere. The Dubinin-Astakhov equation adjusts very well the experimental results, although one cannot interpret the pre-exponential factor w₀ as the limiting adsorbed amount. The parameter E, related with the adsorption energy, and the parameter n, that can be associated with the surface heterogeneity of the adsorbents, are correlated and the first is also correlated with the adsorbed amounts. It was not found any expectable relationship between the adsorbed amounts and textural parameters of the adsorbents such as the specific surface area or the microporous volume. This points out that the adsorption of H₂S is highly specific. In general, 13X and Y sodium zeolites seem to be the most effective adsorbents, but at lowest tested pressures, near the concentrations found at museums, a pillared clay prepared from a Wyoming montmorillonite seems to be more efficient.