Complex Tellurium Salts with Supramolecular Bidimensional Lattices: Synthesis and X‐ray Characterization of (2‐Br‐C5NH5)2[TeX6] (X = Cl,Br)

The reaction of tellurium(IV) tetrahalides with hydrochloric and hydrobromic acid leads to the formation of (H₃O)₂[TeX₆], which reacts subsequently with (2‐Br‐C₅NH₅)⁺X^‐ to afford (2‐Br‐C₅NH₅)₂[TeCl₆] ( 1 ) and (2‐Br‐C₅NH₅)₂[TeBr₆] ( 2 ). The structure of the complex salts were analysed by X‐ray diffractometry affording the centrosymmetric space groups P2₁/n (monoclinic, 1 ) and P1¯ (triclinic, 2 ). Interionic hydrogen bondings hold their lattices in bidimensional supramolecular arrays not yet described in the literature. The lone electron pair of the AX₆E‐system of the hexahalotellurates [TeX₆]^2‐ (X = Cl, Br) seems to be fully delocalized since only small octahedral deviations were observed for the anionic species. The structures of the title compounds were refined with the Te atoms occupying sites with full point symmetry, approximately m3¯m. In both cases the Te atoms enclose centers of inversion and the octahedrally dynamic structures are enforced and stabilized along the supramolecular lattices by the crystal field of the 2‐Br‐pyridinium cations.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Density-functional study of mechanisms for the cofactor-free decarboxylation performed by uroporphyrinogen III decarboxylase

Uroporphyrinogen III decarboxylase catalyzes the fifth step in heme biosynthesis: the elimination of carboxyl groups from the four acetate side chains of uroporphyrinogen III to yield coproporphyrinogen III. The enzyme acts by successively protonating each of the four pyrrole rings present in the substrate, thereby allowing decarboxylation of their side chains, but the identity of the proton donors has not been established yet. Tyr164 has been suggested as a proton donor, and Asp86 has been proposed to act either as a proton donor or as an intermediate-stabilizing residue. We have performed density-functional calculations to study this reaction mechanism, and found that the rate-limiting step is substrate protonation, rather than decarboxylation. Surprisingly, whereas Tyr164 is unable to protonate the substrate, this protonation can be effected by a nearby arginine residue (Arg37), with a free energy barrier of 21.4 kcal.mol(-1), in remarkable agreement with the experimental value of 19.5 kcal.mol(-1). The central positioning of this residue in close proximity to all four pyrrole rings in the substrate may play a key role in the sequential activation of each of these moieties.     

Ab initio crystal orbital studies on linear chains of H atoms

Anab initio crystal orbital method is used to calculate the energies of an infinite chain of H atoms and of linear arrangements of H₂ molecules with different interatomic distances. The H₂ arrangements are not stable in respect to isolated molecules. The cohesive energy of an optimized arrangement of H atoms chain is 0.0354 a.u.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Rapid qualitative analysis of metallic alloys by electrospot chromatography

Summary Electrography and paper chromatography were combined to analyse rapidly metallic alloys in an almost non destructive technique. Using anodic dissolution the sample is applied on the start point of the chromatographic paper. Known ketones-HCl-water mixtures are usually used as solvents to analyse electrospots of different alloys and metal coatings and a separate electrospottest is recommended for Cr. Results of qualitative analysis of some steels, Cu–Ni, and Pb alloys are presented.     

Biotransformation of (−)β-pinene by Aspergillus niger ATCC 9642

The main objective of this work was to investigate the biotransformations of (−)α-pinene, (−)β-pinene, and (+) limonene by Aspergillus niger ATCC 9642. The culture conditions involved—concentration of cosolvent (EtOH), substrate applied, and sequential addition of substrates—were investigated. Adaptation of the precultures with small amounts of substrate was also studied. The experiments were performed in conical flasks with liquid cultures. This strain of A. niger was able to convert only (−)β-pinene into α-terpineol. An optimum conversion of (−)β-pinene into α-terpineol of about 4% was obtained when the substrate was applied as a diluted solution in EtOH and sequential addition of substrate was used.     

Molecular-level control of the photoluminescence from PPV nanostructured films

The fabrication of varied molecular architectures in layer-by-layer (LbL) films is exploited to control the photoluminescence (PL) of poly(p-phenylene vinylene) (PPV) in an unprecedented way. This was achieved by controlling the F?rster energy transfer between PPV layers (donors) and layers of a commercial azodye, Brilliant Yellow (BY) (acceptors). Energy transfer was controlled by inserting spacer layers of inert polymers between PPV and BY layers and by photoaligning the BY molecules via trans-cis-trans isomerization. The PPV/BY LbL films displayed polarized PL whose intensity could be varied almost continuously by changing the time of photoalignment, which was carried out by impinging a linearly polarized laser light simultaneously to the PL experiments. For PPV/BY films with no spacer layers, PL was completely quenched, but its intensity increased with the number of spacing layers. Further increase in PL was obtained by photoaligning the BY molecules perpendicularly to the PPV molecules. This minimizes energy transfer, since F?rster processes are directional, dipole-dependent resonant transfers. Energy transfer is also controlled by imparting a preferential orientation of the PPV chains on PPV/BY LbL films deposited onto flexible Teflon substrates that may be stretched.     

A new electrolytic dissolution of aluminum alloys and determination of some constituents by inductively coupled plasma optical emission spectrometry

The new electrolytic dissolution in batch of aluminum alloys samples as grains or turns and the determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb and Ti by ICP OES was investigated. In on-line electrodissolution procedures described in the literature, samples were restricted to be in the form of solid blocks or plates with one polished flat face. Here, the sample was loaded in the barrel of a modified disposable syringe (the anodic semi-cell) and pressed with a modified plunger fitted with a platinum disk to establish electrical contact with the analyte. This arrangement was introduced in a beaker containing the electrolyte (1 mol L⁻¹ HNO₃) and a platinum wire as the cathode. The resulting solution from electrodissolution (0.6 A) was used for the ICP OES determinations. The influence of the aluminum concentration increase on the determination of the elements was evaluated. Electrodissolution of certified reference materials and commercial samples revealed relative errors lower than 10% for the elements Fe, Cu, Mg, Ni, Cr, Zn and Ti (when their content is above 0.1%). Higher inaccuracies (>10%) were observed for Mn and for Fe in B.C.S. 268/1 reference material certified. The proposed method presented a relative standard deviations (R.S.D.) lower or circa 10% to all of the elements (except Pb). In comparison with traditional acid dissolution, the proposed electrodissolution method is relatively fast (about 30 min), it is clean (there is no projection of solution) and simple (heating and fumes exhaust system were not necessaries).