Effects of co-substitution on the electrical properties of BiFeO3 thin films prepared by chemical solution deposition

Ferroelectric BiFeO₃ thin films with Nd-Cr (or Sm-Cr) co-substitution (denoted by BNdFCr and BSmFCr, respectively) were deposited on the Pt(2 0 0)/TiO₂/SiO₂/Si(1 0 0) substrates by a chemical solution deposition method. X-ray diffraction patterns revealed the formation of BNdFCr and BSmFCr thin films without any secondary phases. The co-substituted BNdFCr (or BSmFCr) thin films, which were annealed at 550 °C for 30 min in N₂ atmosphere, exhibited enhanced electrical properties compared to BFO thin films with the remanent polarization (2P_r) and coercive electric field (2E_c) of 196, 188 μC/cm² and 600, 570 kV/cm with the electric field of 800 kV/cm, respectively. The leakage current densities of BNdFCr and BSmFCr thin films measured at room temperature were approximately three orders of magnitude lower than that of BFO thin film, and the leakage current at room temperature of the thin films exhibited three distinctive conduction behaviors. Furthermore, the values of pulse polarizations [i.e., +(P*-P^{^}) or −(P*-P^{^})] of BNdFCr and BSmFCr thin films were reasonably unchanged up to 1.4 × 10¹⁰ switching cycles.     

A nanoscale understanding of the adhesion of polybutylene terephthalate on aluminum

The adhesion strength of polybutylene terephthalate (PBT) on aluminum was investigated using density functional theory-based total energy calculations. Aluminum atom was connected to a PBT monomer at different orientations and total energies were calculated in order to determine the most stable orientation. The energy differences showed that the Al oriented at 180° with the ester group of the monomer bonded strongly. Using this orientation, the PBT monomer-adhesion on aluminum surface and the aluminum atom adhesion on PBT bulk were also investigated.     

Dissociative adsorption of N2 on W(1 1 0): Theoretical study of the dependence on the incidence angle

The dissociative adsorption of N₂ on W(1 1 0) is studied using classical dynamics on a six-dimensional potential energy surface obtained from density functional theory calculations. Two distinct channels are identified in the dissociation process: a direct one and an indirect one. It is shown that the direct channel is inhibited for low energy molecules (E_i < 400 meV) and low incidence angles. The indirect channel includes long-lasting dynamic trapping of the molecule at the surface before dissociation. The dependence of the sticking coefficient on the initial incidence angle is analyzed. The theoretical results compare well with values measured using molecular beam techniques.     

Determination of the optimal wavelength for temperature independent detection of commercial gasoline with a polymer cladding optical fiber

An influence of temperature variations on transmission of a polymer cladding silica core (PCS) optical fiber was investigated in a wide spectral range covering the first (1710 nm) and the second (1170 nm) vibrational overtone bands of gasoline absorption. Thermo-induced changes of the fiber background transmittance have strong dependence on wavelength. A narrow wavelength band around 1214 nm was found to be almost free from the thermal effects while maintaining sufficient sensitivity for gasoline detection.     

Linear Synthesis of The Methyl Glycosides of Tri-, Tetra-, and Pentasaccharide Fragments of The Shigella Flexneri Serotype 5A O-Antigen

ABSTRACT

The stepwise synthesis of methyl α-D-glucopyranosyl-(1→3)-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (EBC-OMe, 1), methyl α-L-rhamnopyranosyl-(1→2)-[α-D-glucopyranosyl-(1→3)]-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (A(E)BC-OMe, 2), and methyl 2-acetamido-2-deoxy-β-D-glucopyranosyl-(1→2)-α-L-rhamnopyranosyl-(1→2)-[α-D-glucopyranosyl-(1→3)]-α-L-rhamnopyranosyl-(1→3)-α-L-rhamnopyranoside (DA(E)BC-OMe, 3) is described. Compounds 1, 2 and 3 constitute the methyl glycosides of fragments of the O-specific polysaccharide of Shigella flexneri serotype 5a. Methyl 2,4-di-O-benzoyl-α-L-rhamnopyranosyl-(1→3)-2,4-di-O-benzoyl-α-L-rhamnopyranoside was an appropriate BC precursor for the synthesis of 1. For the synthesis of the branched targets 2 and 3, a benzyl group was best suited at position 2 of rhamnose C. Thus, methyl 4-O-benzyl-α-L-rhamnopyranosyl-(1→3)-2,4-di-O-benzyl-α-L-rhamnopyranoside was the key intermediate to the BC portion. In all cases, 2,3,4,6-tetra-O-benzyl-α-D-glucopyranosyl fluoride was a convenient E precursor, when used in combination with titanium tetrafluoride. All along, attention was paid to steric hindrance as a factor of major impact on the condensation steps outcome. Therefore, based on previous experience, 2-O-acetyl-3,4-di-O-allyl-α-L-rhamnopyranosyl trichloroacetimidate and 3,4,6-tri-O-acetyl-2-deoxy-2-trichloroacetamido-α-D-glucopyranosyl trichloroacetimidate were used as donors. Both suited all requirements when used as key precursors for residues A and D in the synthesis of 3, respectively.     

Complete assignment of NMR data of 22 phenyl‐1H‐pyrazoles' derivatives

Complete assignment of ¹H and ¹³C NMR chemical shifts and J(¹H/¹H and ¹H/¹⁹F) coupling constants for 22 1‐phenyl‐1H‐pyrazoles' derivates were performed using the concerted application of ¹H 1D and ¹H, ¹³C 2D gs‐HSQC and gs‐HMBC experiments. All 1‐phenyl‐1H‐pyrazoles' derivatives were synthesized as described by Finar and co‐workers. The formylated 1‐phenyl‐1H‐pyrazoles' derivatives were performed under Duff's conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of octahedral zirconium complex bearing [NHC?O] ligands,and its behavior as catalyst in the polymerization of olefins

The synthesis and characterization of a zirconium complex, having two alkoxide functionalized N‐heterocyclic carbene ligands, and its behavior as catalyst in the polymerization of ethylene and propylene, have been reported. NMR analysis showed that more than one species was obtained during synthesis. These data were confirmed by ethylene polymerization that gave rise to a linear polyethylene having a high Molecular weight and a polydispersity index (MDI) > 2 and often bimodal. The same catalytic system was able to produce highly isotactic polypropylene together with an atactic fraction. DFT studies on the complex stereoisomer stability gave indications on the species possibly involved in the polymerizations. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Expeditious preparation of isoxazoles from Δ-isoxazolines as advanced intermediates for functional materials

A collection of isoxazoles derivatives has been efficiently synthesized in three steps. The oximation reaction of aldehydes followed by nitrile oxide [3+2] 1,3-dipolar cycloaddition and MnO₂-oxidation reaction furnished the title compounds which were purified by simple filtration on celite®.     

Catalyst-free synthesis of benzodiazepines and benzimidazoles using glycerol as recyclable solvent

We described herein the use of glycerol as solvent in the catalyst-free synthesis of benzodiazepines and benzimidazoles. This simple and efficient method furnishes the corresponding 1-H-1,5-benzodiazepines and 1,2-disubstituted benzimidazoles in good yields by the condensation of o-phenylenediamine with several ketones and aldehydes, respectively. In addition, glycerol can be easily re-utilized for further condensation reactions up to four times without lost of activity.     

CdS films deposited by chemical bath under rotation

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl₂, KOH, NH₄NO₃ and CS(NH₂)₂ as chemical reagents and heated at 75 °C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.