Miniaturised enzymatic conductometric biosensor with Nafion membrane for the direct determination of formaldehyde in water samples

A new conductometric enzyme-based biosensor was developed for the determination of formaldehyde (FA) in aqueous solutions. The biosensor was prepared by cross-linking formaldehyde dehydrogenase from Pseudomonas putida with bovine serum albumin in saturated glutaraldehyde vapours (GA) at the surface of interdigitated gold microelectrodes. Nicotinamide adenine dinucleotide cofactor (NAD⁺) was added in solution at each measurement to maintain enzyme activity. Addition of a Nafion layer over the enzyme modified electrode resulted in a significant increase of biosensor signal due to enhanced accumulation of protons generated by enzymatic reaction at the electrode surface. Different parameters affecting enzyme activity or playing a role in ionic transfer through the Nafion membrane were optimised. In optimal conditions (0.045 mg enzyme, 30 min exposure to GA, 0.3 μL of a 1 % (v/v) Nafion solution deposit, measurement in 5 mM phosphate buffer pH 7 containing 20 μM NAD⁺), the biosensor signal was linear up to 10 mM FA, and the detection limit was 18 μM. Relative standard deviations calculated from five consecutive replicates of FA solutions were lower than 5 % in the 1–10 mM range. The biosensor was successfully applied to the determination of FA in spiked water samples (tap water and Rhone river water), with recoveries in the 95–110 % range.

Characterization of Biocatalysts Prepared with Thermomyces lanuginosus Lipase and Different Silica Precursors,Dried using Aerogel and Xerogel Techniques

The use of lipases in industrial processes can result in products with high levels of purity and at the same time reduce pollutant generation and improve both selectivity and yields. In this work, lipase from Thermomyces lanuginosus was immobilized using two different techniques. The first involves the hydrolysis/polycondensation of a silica precursor (tetramethoxysilane (TMOS)) at neutral pH and ambient temperature, and the second one uses tetraethoxysilane (TEOS) as the silica precursor, involving the hydrolysis and polycondensation of the alkoxide in appropriate solvents. After immobilization, the enzymatic preparations were dried using the aerogel and xerogel techniques and then characterized in terms of their hydrolytic activities using a titrimetric method with olive oil and by the formation of 2-phenylethyl acetate in a transesterification reaction. The morphological properties of the materials were characterized using scanning electron microscopy, measurements of the surface area and pore size and volume, thermogravimetric analysis, and exploratory differential calorimetry. The results of the work indicate that the use of different silica precursors (TEOS or TMOS) and different drying techniques (aerogel or xerogel) can significantly affect the properties of the resulting biocatalyst. Drying with supercritical CO₂ provided higher enzymatic activities and pore sizes and was therefore preferable to drying, using the xerogel technique. Thermogravimetric analysis and differential scanning calorimetry analyses revealed differences in behavior between the two biocatalyst preparations due to the compounds present.     

Radioanalytical assessment of environmental contamination around non-remediated uranium mining legacy site and radium mobility

During the past century extensive uranium mining took place in Portugal for radium and uranium production. One such uranium mine was the Boco Mine, in operation during the 1960s and 70s. Mining waste and open pits were left uncovered since mine closure. During the nineties a quarry for sand extraction was operated in the same site and water from a local stream was extensively used in sand sieving. Downstream the mine area, agriculture soil is used for cattle grazing. Water from the stream, water wells, soil, pasture and sheep meat were now analyzed for radionuclides of uranium natural series. The U-series radionuclide ²²⁶Ra was generally the highest in concentrations especially in soil, pasture, and in internal organs of sheep. ²²⁶Ra concentrations were 1,093 ± 96 Bq/kg (dry weight, dw) in soil, 43 ± 3 Bq/kg (dw) in pasture, and 193 ± 84 mBq/kg (wet weight, ww) in muscle tissue of sheep. Other sheep internal organs displayed much higher ²²⁶Ra concentrations, such as the brain and kidneys with 1,850 ± 613 mBq/kg (ww) and 6,043 ± 6,023 mBq/kg (ww), respectively. Results of analyses of tissue samples from sheep grown in a comparison area were 2 to 16 times lower, depending on the organ. Absorbed radiation doses for internal organs were computed and may exceed 5.2 mGy/y in the case of kidneys, near three times higher than in animals from the reference area, but below the threshold for biological effects. Radionuclide transfer in the terrestrial food chain and radiation exposure of the human population is discussed.     

Kinetic study of template removal of Al-MCM-41 synthesized at room temperature

The Al-MCM-41 molecular sieve with Si/Al = 20 molar ratio was synthesized at room temperature and characterized by X-ray diffractometry, surface area, thermogravimetry, and infrared spectroscopy. The kinetic study was conducted by Vyazovkin and Ozawa method, in order to verify the activation energy during the Hofmann degradation between 130 and 370 °C, in which most of surfactant removal occurs. The results suggest that the activation energy for template removal is close to 80 kJ mol^?1 lower in Al-MCM-41 synthesized at room temperature, when compared to results obtained for mesopores Al-MCM-41 and MCM-41 synthesized by hydrothermal method. This lower activation energy may be understood as consequence of textural properties, such as higher pore size.     

Potentiometric study of the protonation and distribution equilibria of d-gluconic-delta-lactone acid in sodium perchlorate solutions at 25 degrees C and construction of a thermodynamic model

The protolytic behavior of d-gluconic-delta-lactone acid has been studied by means of automated potentiometric titrations at different ionic strengths in the range 0.1相似文献   

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Multiple bonds between main group elements and transition metals, 155. (Hexamethylphosphoramide) methyl(oxo) bis(η-peroxo)rhenium(VII), the first example of an anhydrous rhenium peroxo complex: crystal structure and catalytic properties

Methyl(oxo)bis(η²-peroxo)rhenium(VII)1, the active species of the system CH₃ReO₃/H₂O₂ in the catalytic oxidation of different organic and organometallic compounds, is stabilized by a water molecule attached to the rhenium center. This water molecule can be removed and substituted by hexamethylphosphoramide (HMPA) to yield (hexamethylphosphoramide)methyl(oxo)bis(η²-peroxo rhenium(VII) (3). The synthesis, crystal structure (X-ray difraction study), and catalytic properties of which compound are reported. Crystal data are as follows: monoclinic, space group P2₁/n, A = 900.76(7) pm, B = 1229.80(11) pm, C = 1318.57(11) pm, β = 90.251(7)°, R_w = 0.034 for 1878 reflections. The catalytic properties of compound 3 in the oxidation of olefins with H₂O₂ are similar to those of 1.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Characterization of xylitol dehydrogenase from debaryomyces hansenii

The xylitol dehydrogenase (EC 1.1.1.9) from xylose-grown cells ofDebaryomyces hansenii was partially purified in two Chromatographic steps, and characterization studies were carried out in order to inves tigate the role of the xylitol dehydrogenase-catalyzed step in the regu lation of D-xylose metabolism. The enzyme was most active at pH 9.0–9.5, and exhibited a broad polyol specificity. The Michaelis con stants for xylitol and NAD⁺ were 16.5 and 0.55 mM, respectively. Ca²⁺, Mg²⁺, and Mn²⁺ did not affect the enzyme activity. Conversely, Zn²⁺, Cd²⁺, and Co²⁺ strongly inhibited the enzyme activity. It was concluded that NAD⁺-xylitol dehydrogenase from D.hansenii has similarities with other xylose-fermenting yeasts in respect to optimal pH, substrate specificity, and K_m value for xylitol, and therefore should be named L-iditol:NAD⁺-5-oxidoreductase (EC 1.1.1.14). The reason D.hansenii is a good xylitol producer is not because of its value of K_m for xylitol, which is low enough to assure its fast oxidation by NAD⁺ xylitol dehydrogenase. However, a higher K_m value of xylitol dehydro genase for NAD⁺ compared to theK _m values of other xylose-ferment ing yeasts may be responsible for the higher xylitol yields.