Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Phase separation of p53 precedes aggregation and is affected by oncogenic mutations and ligands

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF). The mechanism of the formation of the aggregates in the nucleus remains uncertain. The present study demonstrated that the DNA-binding domain of p53 (p53C) underwent phase separation (PS) on the pathway to aggregation under various conditions. p53C phase separated in the presence of the crowding agent polyethylene glycol (PEG). Similarly, mutant p53C (M237I and R249S) underwent PS; however, the process evolved to a solid-like phase transition faster than that in the case of wild-type p53C. The data obtained by microscopy of live cells indicated that transfection of mutant full-length p53 into the cells tended to result in PS and phase transition (PT) in the nuclear compartments, which are likely the cause of the GoF effects. Fluorescence recovery after photobleaching (FRAP) experiments revealed liquid characteristics of the condensates in the nucleus. Mutant p53 tended to undergo gel- and solid-like phase transitions in the nucleus and in nuclear bodies demonstrated by slow and incomplete recovery of fluorescence after photobleaching. Polyanions, such as heparin and RNA, were able to modulate PS and PT in vitro. Heparin apparently stabilized the condensates in a gel-like state, and RNA apparently induced a solid-like state of the protein even in the absence of PEG. Conditions that destabilize p53C into a molten globule conformation also produced liquid droplets in the absence of crowding. The disordered transactivation domain (TAD) modulated both phase separation and amyloid aggregation. In summary, our data provide mechanistic insight into the formation of p53 condensates and conditions that may result in the formation of aggregated structures, such as mutant amyloid oligomers, in cancer. The pathway of mutant p53 from liquid droplets to gel-like and solid-like (amyloid) species may be a suitable target for anticancer therapy.

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF).     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Theoretical study of ribonucleotide reductase mechanism-based inhibition by 2'-azido-2'-deoxyribonucleoside 5'-diphosphates

2'-azido-2'-deoxyribonucleoside 5'-diphosphates are mechanism-based inhibitors of Ribonucleotide Reductase. Considerable effort has been made to elucidate their mechanism of inhibition, which is still controversial and not fully understood. Previous studies have detected the formation of a radical intermediate when the inhibitors interact with the enzyme, and several authors have proposed possible structures for this radical. We have conducted a theoretical study of the possible reactions involved, which allowed us to identify the structure of the new radical among the several proposals. A new reactional path is also proposed that is the most kinetically favored to yield this radical and ultimately inactivate the enzyme. The energetic involved in this mechanism, both for radical formation and radical decay, as well as the calculated Hyperfine Coupling Constants for the radical intermediate, are in agreement with the correspondent experimental values. This mechanistic alternative is fully coherent with remaining experimental data.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Principal component analysis of the effects of wavefunction modification on the electrostatic potential of indole

The molecular electrostatic potential (MEP) of the indole molecule was calculated in a three‐dimensional grid in which the molecule was centered at the origin. To evaluate the dependence of MEP on the type of calculation, semiempirical, ab initio, and density functional theory methods with different basis sets were employed. The data matrix generated by these calculations was analyzed by principal component analysis (PCA). The appearance of outliers and the effect of wavefunction modifications such as the introduction of electron correlations and diffuse functions were highlighted by the use of PCA. The spatial localization of such effects around the molecule was possible from the loadings values associated with the graphical analysis of the grid points. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

In situ Fourier transform infrared spectroscopy as an efficient tool for determination of reaction kinetics

The performance of new FTIR-based monitoring technology to representatively determine reaction kinetics has been demonstrated on an example of homogeneously catalyzed liquid-phase sucrose hydrolysis to fructose and glucose. The reaction kinetics were investigated by using the ReactIR 1000 reaction analysis system, which enables determination of the component concentration from its characteristic FTIR spectrum. During the sucrose inversion, the ReactIR 1000 instrument connected to a computer controlled standard glass batch reactor provided the required operating conditions and information about the component concentration in real-time. We have studied the influence of hydrogen ion concentration, temperature and initial concentration of sucrose on the sucrose disappearance rate. It was found out that the inversion of sucrose is an irreversible reaction, which is not affected by the formation of fructose and glucose in the liquid-phase. Then, the parameters of the kinetic model (i.e., reaction rate constant and activation energy) were calculated. A comparison of the model output and the measured data showed that the kinetics of the sucrose inversion could be well described by means of the pseudo first-order kinetic model. Finally, the method of determining the kinetic model by FTIR spectroscopy was verified by comparing the results obtained in the batch reactor with the results obtained in the continuously stirred tank reactor.