基于可调负载重分配的无标度网络连锁效应分析

为了深入研究复杂网络抵制连锁故障的全局鲁棒性,针对现实网络上的负载重分配规则常常是介于全局分配与最近邻分配、均匀分配与非均匀分配的特点,围绕负荷这一影响连锁故障发生和传播最重要的物理量以及节点崩溃后的动力学过程,提出了一种可调负载重分配范围与负载重分配异质性的复杂网络连锁故障模型,并分析了该模型在无标度网络上的连锁故障条件.数值模拟获得了复杂网络抵制连锁故障的鲁棒性与模型中参数的关系.此外,基于网络负载分配规则的分析以及理论解析的推导,验证了数值模拟结论,也证明在最近邻与全局分配两种规则下都存在负载分配均匀性参数等于初始负荷强度参数即β=τ使得网络抵御连锁故障的能力最强.     

探究性教学情景下的大学物理课堂评估策略

为了评估大学物理探究性教学情景下的学生综合素质,本文作者研究课堂评估法在探究性课题教学过程中各阶段的实施策略,并进行相应教学实验,得出针对大学物理探究性教学情景下的课堂评估实施原则、方式、标准.实践表明课堂评估法与探究性教学实现了有机融合,促进了学生综合素质的提高,是一种行之有效的评估学生综合素质的教学评价方法.     

Asymptotics of dissipative nonlinear evolution equations with ellipticity: different end states

In this paper, we consider the global existence and asymptotic behaviors of solutions to the Cauchy problem for the following nonlinear evolution equations with ellipticity and dissipative effects:

(E)     

Effects of Quantum Noise on Quantum Clock Synchronization

In laboratory environment, the channel apparatus will generate particular dominant quantum noise. The noise then will give rise to some errors during synchronization. In this work, the accuracies of one qubit transport protocol and entangled states transport protocol in the presence of noise have been studied. With the help of three important and familiar noise models, the quantum noise will degrade the accuracy has been proved. Due to the influence of quantum noise, the accuracy of entangled qubits decrease faster than that of one qubit. The entangled states will improve the accuracy in noise-free channel, and will degrade the accuracy in noise channel.     

ps级脉冲光纤放大器和压缩器

 对掺镱双包层脉冲光纤放大器进行实验研究。当用入纤功率为1.9 W的半导体激光器激光泵浦0.5 m长的双包层掺镱光纤时,把平均功率为7 mW、重复频率25.4 MHz的激光放大到505 mW,相应的单脉冲能量为19.8 nJ,经过光栅对压缩后,得到2.7 ps的脉冲激光。     

Giant Magneto-Impedance of Co50Ni22Ga28 Alloy with High Chemical Ordering

The microstructure of CosoNi22Ga28 ribbon with the L10 structure is examined. The band-like morphology is observed. These bands with the width in a range of 40-200 nm appear along the transverse direction of the ribbon. The giant magnetoimpedance （GMI） effect in this alloy is measured. The results show that Co5oNi22Ga28 exhibits a sharp peak of the GAI effect. The maximum GAH ratio up to 360% is detected. The GMI effect measured versus temperature shows large jumps of the magnetoimpedance amplitude at the reversal martensitic transformation temperature 240℃ and Curie temperature 375℃C respectively. The jump ratios of the magnetoimpedance amplitude examined at these temperatures are about 5 and 10, respectively.     

斜入射脉冲X射线产生电流实验

针对斜入射脉冲X射线与金属的几种可能相互作用机制,设计了实验布局,测量了斜入射X射线在金属靶上产生的脉冲电流,建立了相应的理论模型。结果显示,当X射线入射强度低于105 W/cm2时,以光电效应为主,高于此值时,以热电效应为主导。这表明,X射线加载强度较弱时,电子表现出个体行为,而增大X射线入射强度,电子表现出弱关联集体行为。由此可以预测,超强X射线辐照下,金属表面将出现宏观尺度的电荷密度调制,在退激发过程中,这种调制状态可能以较高的效率辐射定向的微波电磁脉冲。     

Classical mean-variance model revisited: pseudo efficiency

Investigating the inverse problem of the classical Markowitz mean-variance formulation: Given a mean-variance pair, find initial investment levels and their corresponding portfolio policies such that the given mean-variance pair can be realized, we reveal that any mean-variance pair inside the reachable region can be achieved by multiple portfolio policies associated with different initial investment levels. Therefore, in the mean-variance world for a market of all risky assets, the common belief of monotonicity: ‘The larger you invest, the larger expected future wealth you can expect for a given risk (variance) level’ does not hold, which stimulates us to extend the classical two-objective mean-variance framework to an expanded three-objective framework: to maximize the mean and minimize the variance of the final wealth as well as to minimize the initial investment level. As a result, we eliminate from the policy candidate list the set of pseudo efficient policies that are efficient in the original mean-variance space, but inefficient in this newly introduced three-dimensional objective space.     

Pb-Mg-Al合金腐蚀机理的电子理论研究

为了了解Pb-Mg-Al合金腐蚀的物理本质, 本文采用基于第一性原理的赝势平面波方法系统地计算了Pb-Mg-Al合金中各物相的结合能、费米能级和局域态密度等电子结构参数, 分析了合金的电化学腐蚀机理. 计算结果表明：Pb-Mg-Al合金中各主要组成物相稳定性大小关系为 Mg₁₇Al₁₂>Mg₂Pb>Mg;Mg,Mg₂Pb和Mg₁₇Al₁₂的费米能级存在E_f(Mg)>E_f(Mg₂Pb)>E_f(Mg₁₇Al₁₂)的关系, 说明Mg最容易失去电子, Mg₂Pb次之, Mg₁₇Al₁₂最难;局域态密度表明, 在同样的外界条件下, 体系中Mg相和Mg₂Pb相对于Mg₁₇Al₁₂均处于不稳定的状态, 容易失去电子, 即容易发生腐蚀. Pb-Mg-Al合金体系中不同物相的费米能级差构成了电化学腐蚀的电动势, 导致电子从费米能级高的Mg相和Mg₂Pb相流向费米能级低的Mg₁₇Al₁₂相, 使Pb-Mg-Al合金发生腐蚀.     

1064 nm激光对中性密度滤光片的损伤机理研究

中性密度滤光片的典型结构是在K9玻璃上镀金属膜,来实现对激光的有效吸收.由于损伤阈值较低,严重限制了其在高能激光系统中的应用.实验研究了较高激光能量密度下滤光片的损伤形貌和损伤机理.损伤形貌的变化特征是:随着激光能量密度的增加,滤光片先出现损伤点,后以损伤点为中心产生裂纹,且裂纹长度逐渐变长,最终连接成线状和块状,导致大面积的薄膜脱落.建立了缺陷吸收激光能量升温致中性密度滤光片表面薄膜损伤的模型,计算了薄膜表面的温度和应力分布,讨论了薄膜表面不均匀温升造成的径向、环向和轴向热应力分布.理论分析显示:环向应力是造成薄膜沿径向产生裂纹的主要原因.当激光能量密度大于约2.2 J/cm²,杂质粒子半径大于140 nm且相邻杂质粒子之间的距离小于10 μ m时,裂纹才能大量连接起来引起薄膜的大面积脱落.