Transferrin immunoextraction for determination of carbohydrate‐deficient transferrin in human serum by capillary zone electrophoresis

CZE‐based assays for carbohydrate‐deficient transferrin (CDT) in which serum is mixed with an Fe(III) ion‐containing solution prior to analysis are effective approaches for the determination of CDT in patient samples. Sera of patients with progressed diseases, however, are prone to interferences comigrating with transferrin (Tf) that prevent the proper determination of CDT by CZE in these samples. The need of a simple and economic approach to immunoextract Tf from human serum prompted us to investigate the use of a laboratory‐made anti‐Tf spin column containing polyclonal rabbit anti‐human Tf antibodies linked to Sepharose 4 Fast Flow beads. This article reports extraction column manufacturing and column characterization with sera having normal and elevated CDT levels. The developed procedure was applied to a number of relevant hepatology and dialysis patient samples and could thereby be shown to represent an effective method for extraction and concentration of all Tf isoforms. Furthermore, lipemic sera were delipidated using a mixture of diisopropyl ether and butanol prior to immunoextraction. CDT could unambiguously be determined in all pretreated samples.     

Study of the Ternary Systems M (II)(NO3)2–LiNO3–H2O ( M (II)?5?Mg, Ca, Sr, Ba) at 25°C

 The isothermal solubility diagrams of four aqueous systems containing lithium nitrate and nitrates of group IIA metals – magnesium, calcium, strontium, and barium – were studied at 25°C. No double salt formation was observed. The results were compared with similar nitrate and chloride systems. Some trends in the shape of the phase diagrams were observed. Hydration analysis was applied to the solubility branches, rendering information about ionic processes in saturated solutions. Further, the ratio of activity coefficients of the saturating solid phase in ternary and binary solutions (γ/γ₀) was obtained.     

Synthesis of nanosized titanium dioxide from tetrabutoxytitanium

Mesoporous TiO₂ has been obtained by template synthesis. The introduction of a surfactant in the hydrolysis of tetrabutoxytitanium in aqueous ethanol allows the structure of the resulting material to be controlled. The amorphous TiO₂ resulting from hydrolysis turns into anatase on being calcined at 300°C. As determined by X-ray diffraction, the anatase crystallite size is 70 nm in the presence of the highest surfactant concentration examined and 210 nm in the absence of a surfactant. Amorphous materials have been characterized by electron microscopy and differential thermal analysis. The ultimate benzene adsorption value has been determined for calcined mesoporous TiO₂.     

Aggregation Effects in Visible‐Light Flavin Photocatalysts: Synthesis,Structure, and Catalytic Activity of 10‐Arylflavins

A series of 10‐arylflavins (10‐phenyl‐, 10‐(2′,6′‐dimethylphenyl)‐, 10‐(2′,6′‐diethylphenyl)‐, 10‐(2′,6′‐diisopropylphenyl)‐, 10‐(2′‐tert‐butylphenyl)‐, and 10‐(2′,6′‐dimethylphenyl)‐3‐methylisoalloxazine ( 2 a – f )) was prepared as potentially nonaggregating flavin photocatalysts. The investigation of their structures in the crystalline phase combined with ¹H‐DOSY NMR spectroscopic experiments in CD₃CN, CD₃CN/D₂O (1:1), and D₂O confirm the decreased ability of 10‐arylflavins 2 to form aggregates relative to tetra‐O‐acetyl riboflavin ( 1 ). 10‐Arylflavins 2 a – d do not interact by π–π interactions, which are restricted by the 10‐phenyl ring oriented perpendicularly to the isoalloxazine skeleton. On the other hand, N3? H???O hydrogen bonds were detected in their crystal structures. In the structure of 10‐aryl‐3‐methylflavin ( 2 f ) with a substituted N3 position, weak C? H???O bonds and weak π–π interactions were found. 10‐Arylflavins 2 were tested as photoredox catalysts for the aerial oxidation of 4‐methoxybenzyl alcohol to the corresponding aldehyde (model reaction), thus showing higher efficiency relative to 1 . The quantum yields of 4‐methoxybenzyl alcohol oxidation reactions mediated by arylflavins 2 were higher by almost one order of magnitude relative to values in the presence of 1 .     

Solubility and Ionic Processes in the Cu X 2? MX ?H2O ( X ?=Cl?, Br?; M +=Li+, Na+, K+, NH4+, Cs+) Systems

 Solubility isotherms in the CuBr₂−MBr−H₂O (M ⁺ = Li⁺, Na⁺, Cs⁺) systems at 298.15 K were measured. The results together with other available literature data for copper chloride and bromide systems were treated by hydration analysis, and comparative discussion of ionic processes taking place in the respective saturated solutions was performed.     

Characterization of the volatile fraction emitted by Pinus spp. by one- and two-dimensional chromatographic techniques with mass spectrometric detection

The chemical composition of the needles of P. pinea, P. pinaster, P. halepensis, P. nigra, P. brutia, P. patula, P. radiata, P. taeda, P. elliotti, P. kesiya, P. sylvestris and P. eldarica was investigated. Headspace solid-phase microextraction and steam distillation extraction were used to collect the volatile fractions. Samples were analyzed using one-dimensional gas chromatography (1D-GC) and comprehensive two-dimensional gas chromatography (GC × GC) associated with a quadrupole and a time-of-flight mass detectors. Results showed that the analytical capabilities of 1D-GC are partially limited by the separation power of the columns. The higher sensibility and the absence of peak skewing of the time-of-flight mass analyzer, with the use of automated peak finding and deconvolution algorithms, allowed for the detection of trace components with qualitative full spectra and the extraction of true mass spectra from coeluting compounds, promoting their reliable identification and thus significantly improving results obtained by 1D-GC/MS, when using a quadrupole mass analyzer. The use of GC × GC resulted in enhanced separation efficiency and increased signal to noise ratio (sensitivity) of the analytes, maximizing mass spectra quality and improving compound detection and identification. This work shows the use of 1D-GC/ToFMS for the analysis of pine needles volatiles, achieving the detection of 177 compounds, that is more than twice the number previously identified by standard 1D-GC/MS. The analysis by GC × GC for the same sample allowed the detection of 212 compounds. The enantioselective GC × GC analysis performed for all the Pinus spp. under study achieved the detection of 422 different compounds. Cross-over phenomena according to operational conditions are highlighted and discussed.     

Computer Study of the Association Behavior of Gradient Copolymers: Analysis of Simulation Results Based on a New Algorithm for Recognition and Classification of Aggregates

We present a computer study of the association behavior of copolymer chains with a gradient part and soluble tail of variable length. As a simulation method we use dynamic Monte Carlo simulation on a simple cubic lattice with pair interaction parameters. The solvent quality and selectivity is modeled by the variation of pair interaction parameters between nearest neighbors on the lattice. The role of the length of soluble part in the self‐assembly and its effect on the structure of aggregates was the main goal of this work. The size and structure of aggregates were analyzed using an improved topological classification method which has been developed and tested in the present study. The structure and association numbers of aggregates were compared with those of linear diblock copolymers.

     

Evaluation of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry for the diagnosis of inherited metabolic disorders using an automated data processing strategy

Organic acidurias are a large group of inherited metabolic disorders (IMDs), commonly diagnosed by GC-MS analysis of organic acids in urine after acidic extraction and trimethylsilylation. In this study, a GC×GC-ToF-MS method has been optimized for the analysis of pathological metabolites in urine. An automated data processing strategy based on the use of mass spectra and GC retention times for the target search and quantification of pathological metabolites has been developed. Using this procedure, each unknown sample is automatically examined for the presence of markers of several diseases at the same time. The method has been applied for the analysis of 6 challenging proficiency testing samples from patients with IMDs (thymidine phosphorylase deficiency, mevalonic aciduria, hawkinsinuria, aromatic l-amino acid decarboxylase deficiency, propionic acidemia and medium-chain acyl-CoA dehydrogenase deficiency). Using the GC×GC-ToF-MS method, we were able to determine complete sets of markers for all the IMDs. The quality of the mass spectral matches for the pathological markers was higher than 800 (out of 1000).     

Analysis of anthocyanin pigments in Lonicera (Caerulea) extracts using chromatographic fractionation followed by microcolumn liquid chromatography-mass spectrometry

Anthocyanins from the fruit Lonicera caerulea L. var. kamtschatica (blueberry honeysuckle, Caprifoliaceae) were studied via (semi)preparative chromatographic fractionation followed by MS and μLC/MS analysis. The extraction procedure was optimized with respect to analytical purposes as well as its potential use for the preparation of nutraceuticals. The highest yield of anthocyanins was obtained using acidified methanol as the extraction medium. A comparable total anthocyanin content was obtained using a mixture of methanol and acetone. However, when Lonicera anthocyanins were in contact with acetone, a condensation reaction occurred to a large extent and related 5-methylpyranoanthocyanins were found. The effect of other extraction media, including ethanol as a "green" solvent, is also discussed. The potential of two fractionation procedures for extract purification differing in their chromatographic selectivity and scale was studied (i.e. using a Sephadex LH-20 gel column and a reversed phase). Fractions obtained by both procedures were used for a detailed analysis. MS and μLC/MS(2) methods were used for monitoring anthocyanin and 5-methylpyranoderivatives content as well as identifying less common and more complex dyes (dimer of cyanidin-3-hexoside, cyanidin-ethyl-catechin-hexosides, etc.). These more complex dyes are most likely formed during fruit treatment.