Synthesis and pharmacology of 3,4-dihydro-3-oxo-1,4-benzoxazine-8-carboxamide derivatives, a new class of potent serotonin-3 (5-HT3) receptor antagonists.

A series of 3,4-dihydro-3-oxo-1,4-benzoxazine-8-carboxamide derivatives was synthesized and evaluated for serotonin-3 (5-HT3) receptor antagonistic activity assessed by their ability to antagonize the von Bezold-Jarish (BJ) effect in rats. Derivatives bearing 1-azabicyclo[2.2.2]oct-3-yl moiety as a basic function attached to the carboxamide at position 8 showed more potent antagonistic activity than those bearing the other three basic moieties. Structure-activity relationships of this series showed that methyl and chloro groups were more effective as substituents at positions 4 and 6, respectively. The representative compound 15 (Y-25130) in this series showed potent antagonistic activity on the BJ effect (ED50 = 1.3 micrograms/kg i.v.), high affinity for 5-HT3 receptor (Ki = 2.9 nM) and complete protection against cisplatin-induced emesis in dogs at a dose of 0.1 mg/kg i.v.     

General synthesis of sugar-pendant 1,3-propanediamines containing a C-glycoside linkage

A straightforward route to C-glycoside linked sugar-pendant 1,3-propanediamines is described. The three-step preparation procedure involves (1) C-glycosylation of an OH-protected α-glycosyl halide with malononitrile, (2) catalytic hydrogenation of the nitriles to amines, and (3) deprotection of acetyl groups via acid-catalyzed hydrolysis. In the case of the galactose derivative, excess sodiomalononitrile promotes the second addition of a carbanion in the first step. The β-anomeric configuration was confirmed by X-ray crystallography of the glycosylated intermediates. This method demonstrates a general method to access a new class of carbohydrate-pendant C-glycoside chelators.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. I. Effects of reaction conditions on the polymerization rate and polymer molecular weight

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene was carried out at an initial pressure of 2–25 kg/cm², temperature of 30–110°C, and under a dose rate of 0.57 × 10⁴?3.0 × 10⁴ rad/hr. The rate of polymerization was shown to be proportional to 1.0 and 1.3 powers of the dose rate and initial pressure, respectively, and is maximal at about 70°C. The molecular weight of polytetrafluoroethylene (PTFE) lies in the range of 10⁵?10⁶, increases with reaction time in the early stage of polymerization, and is maximal at 70°C but is almost independent of the dose rate. An interesting discovery is that PTFE, a hydrophobic polymer, forms as a stable latex in the absence of emulsifier. When PTFE latex coagulates during polymerization under certain conditions, the polymerization rate decreases, probably because polymerization proceeds mainly on the polymer particle surface. The observed rate acceleration and successive increase in polymer molecular weight may be due to slow termination of propagating radicals in the rigid PTFE particles.     

Formation and Crystallization Behavior of Gels in the Na2O-SiO2-TiO2-ZrO2 System

SiO₂-TiO₂-ZrO₂ and 5Na₂O·95(SiO₂ + TiO₂ + ZrO₂) gels were synthesized and role of Na₂O in gel formation and crystallization behavior of gels were studied. From Si(OC₂H₅)₄, Ti(iso-OC₃H₇)₄, Zr(n-OC₃H₇)₄ and NaOCH₃ solutions in EtOH without H₂O, transparent and opaque gels were obtained. Opaque bulk gels, rich in TiO₂ or ZrO₂ composition in Na₂O containing SiO₂-TiO₂-ZrO₂ system, contain agglomerated spherical particles of diameter small <10 m, in contrast with opaque gels having large particles <30 m in alkali-free SiO₂-TiO₂-ZrO₂ system. Crystallization temperature (Tc) was measured by DTA on dried gels. Compared with the alkali-free SiO₂-TiO₂-ZrO₂ gels, 5 mol% Na₂O containing gels gave lower Tc in SiO₂ rich compositions and higher in TiO₂ rich or ZrO₂ rich compositions.     

Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”     

Synthesis of ion-exchange membranes by radiation-induced multiple grafting of methyl α,β,β-trifluoroacrylate

Methyl α,β,β-trifluoroacrylate (MTFA) was grafted onto polymer films with the multiple grafting technique initiated by α-rays: the yields were similar to those of the single-step grafting procedure with any irradiation dose. Grafted polymer obtained in the single-step experiments were distributed mainly near the film surface, whereas graft polymer from the multiple grafting experiments were distributed uniformly in the film at graft yields greater than 20%. The electric resistance of the hydrolyzed multiple graft polymer film in a 2N NaOH solution was much lower than that of one-step graft film at the same graft yield.     

Palladium-catalyzed asymmetric cyclization of methyl (E)-oxo-9-phenoxy-7-nonenoate and its analogs

Asymmetric cyclizations of methyl (E)-3-oxo-9-phenoxy-7-nonenoate ($\text{1}$) or methyl (E)-3-oxo-9-(methoxycarbonyl)oxy-7-nonenoate ($\text{4}$) without added base were carried out in the presence of a catalytic amount of palladium(II) acetate and chiral diphosphine as ligands. Allylic carbonate $\text{4}$ reacted by use of Pd(OAC)₂-(S)-(R)-BPPFA at room temperature to give (R)-3-vinylcyclohexanone ($\text{3}$), after decarboxylation, in up to 48% e. e.     

Heat capacity measurements of MnxFe3−xO4

Heat capacities of Mn_xFe_3?xO₄ with the composition x = 1.0, 1.5, and 2.0 were measured from 200 to 740 K. λ-type heat capacity anomalies due to the ferri-paramagnetic transition were observed for all the compositions. The transition temperatures were 577, 471, and 385 K for the composition x = 1.0, 1.5 and 2.0, respectively, which are in good agreement with the results of magnetic measurements. The difference in heat capacities between the different samples was small except for the temperature range of the transition. The magnetic contribution to the observed heat capacity was obtained by assuming that the heat capacity can be expressed by the sum of the lattice heat capacity C_v (l), the dilation contribution C(d), and the magnetic contribution C(m). Entropy changes due to the transition were obtained from C(m) as 55.5, 50.7 and 49.2 J K^?1 mole^?1 for the composition x = 1.0, 1.5, and 2.0, respectively. The entropy changes were also calculated by assuming the randomization of unpaired electron spins on each ion, but they were from 6 to 10 J K^?1 mole^?1 smaller than the observed ones. The difference between the experimental and the calculated values is roughly explained by taking into account the cation exchange reaction between the tetrahedral and the octahedral sites in the spinel structure.     

Efficient regioselective aldol condensation of methyl ketones promoted by organoaluminum compounds,and its application to muscone synthesis

Regioselective aldol condensation of 2-octanone and 2-butanone at the methyl side proceeded in high yields using a system of dialkylaluminum phenoxide/tertiary amine. The intramolecular aldol condensation of 2,15-hexadecanedione was carried out by the same system, especially di-i-butylaluminum phenoxide/pyridine, to give dehydromuscone in 65% yield. Its hydrogenation afforded muscone (3-methylcyclopentadecanone).     

Synthesis and photochemical properties of a photochromic iron(II) complex of hexaarylbiimidazole

The photochromic ligand bis(terpyridyl)hexaarylbiimidazole (bistpy-HABI) and the Fe(II) complex of bistpy-HABI with formula [{Fe(tpy)}2.bistpy-HABI](PF6)4.4H2O were synthesized and characterized. Bistpy-HABI is readily cleaved into a pair of terpyridyltriphenylimidazolyl radicals (tpy-TPI*) on irradiation with UV light. This photochemical reaction is completely reversible, and the light-induced radicals can thermally recombine to form bistpy-HABI in the dark. [{Fe(tpy)}2.bistpy-HABI]4+ is the first example of a transition-metal complex of an HABI derivative and was found to show photochromic reaction in solution. The spin state of the light-induced radical pair in a frozen matrix was investigated by ESR spectroscopy. The triplet state of the light-induced radical pair from [{Fe(tpy)}2.bistpy-HABI]4+, as well as that from bistpy-HABI, was confirmed to be a ground state or nearly degenerated with a singlet state. Kinetic studies on the radical recombination reaction in solution elucidated the decrease in the activation energy by forming the Fe(II) complex. This is the first observation of a decrease in the activation energy of the radical recombination reaction by the formation of a metal-coordinated radical complex. The syntheses, photochemical properties, and spin states of bistpy-HABI and [{Fe(tpy)}2.bistpy-HABI](PF6)4 are discussed.