Mean field calculation of effective permeability based on fractal pore space

Effective permeability for porous rocks is calculated using mean field theory. We make two simplifying assumptions about the internal conductances in a network representation of the porous rock: (i) Pore space is characterized by a uniform fractal scaling; (ii) the internal conductances depend only on the characteristic pore sizes. Within these approximations, it is possible to derive a simple probability density for the internal conductances which is used for calculating effective permeability. Good agreement between calculations and experimental data of permeability vs. porosity is achieved.     

Thermal expansion in 3d-metal Prussian Blue Analogs—A survey study

We present a comprehensive study of the structural properties and the thermal expansion behavior of 17 different Prussian Blue Analogs (PBAs) with compositions M^II₃[(M′)^III(CN)₆]₂·nH₂O and M^II₂[Fe^II(CN)₆]·nH₂O, where M^II=Mn, Fe, Co, Ni, Cu and Zn, (M′)^III=Co, Fe and n is the number of water molecules, which range from 5 to 18 for these compounds. The PBAs were synthesized via standard chemical precipitation methods, and temperature-dependent X-ray diffraction studies were performed in the temperature range between −150 °C (123 K) and room-temperature. The vast majority of the studied PBAs were found to crystallize in cubic structures of space groups Fm3?m, F4?3m and Pm3?m. The temperature dependence of the lattice parameters was taken to compute an average coefficient of linear thermal expansion in the studied temperature range. Of the 17 compounds, 9 display negative values for the average coefficient of linear thermal expansion, which can be as large as 39.7×¹0⁻⁶ K⁻¹ for Co₃[Co(CN)₆]₂·12H₂O. All of the M^II₃[Co^III(CN)₆]₂·nH₂O compounds show negative thermal expansion behavior, which correlates with the Irving–Williams series for metal complex stability. The thermal expansion behavior for the PBAs of the M^II₃[Fe^III(CN)₆]₂·nH₂O family are found to switch between positive (for M=Mn, Co, Ni) and negative (M=Cu, Zn) behavior, depending on the choice of the metal cation (M). On the other hand, all of the M^II₂[Fe^II(CN)₆]·nH₂O compounds show positive thermal expansion behavior.     

Determination of neopterin, kynurenine, tryptophan and creatinine in human serum by high throuput HPLC

A new HPLC method for simultaneous determination of neopterin, creatinine, kynurenine and tryptophan in human serum was developed and validated. Monolithic stationary phase's technology (two monolithic columns RP-18e were connected with guard monolithic cartridge 4.6 mm × 50 mm + 3.0 mm × 100 mm and 4.6 × 10 mm) and special auto sampler for micro titration plates (samples are storage in dark cooled place protected against evaporation) were combined with easy sample preparation step. As mobile phase 15 mmol/L phosphate buffer at pH 4.50 was used. Neopterin and tryptophan were detected using fluorescent detection and kynurenine and creatinine were detected by diode-array detection. This method may be suitable for large sequences of samples in clinical research and routine practice.     

The route to a feasible hydrogen-storage material: MOFs versus ammonia borane

The replacement of fossil fuels is one of the greatest challenges that chemistry and material sciences will have to face in the near future. While hydrogen seems to be the most likely candidate for this, a material able to store the hydrogen itself is sorely needed. Intense research in the past decade has narrowed down the field of possible concepts to two materials: ammonia borane with chemically bound hydrogen atoms and metal-organic frameworks with physisorbed hydrogen molecules. Herein we want to give an overview of the strengths and weaknesses of each concept, discuss the challenges that need to be overcome, and try to compare the future capabilities of these two materials.     

Self-organizing surface-initiated polymerization: facile access to complex functional systems

Facile access to complex systems is crucial to generate the functional materials of the future. Herein, we report self-organizing surface-initiated polymerization (SOSIP) as a user-friendly method to create ordered as well as oriented functional systems on transparent oxide surfaces. In SOSIP, self-organization of monomers and ring-opening disulfide exchange polymerization are combined to ensure the controlled growth of the polymer from the surface. This approach provides rapid access to thick films with smooth, reactivatable surfaces and long-range order with few defects and high precision, including panchromatic photosystems with oriented four-component redox gradients. The activity of SOSIP architectures is clearly better than that of disordered controls.     

Pyrazinecarboxamides as potential elicitors of flavonolignan and flavonoid production in Silybum marianum and Ononis arvensis cultures in vitro

The effect of new synthetic pyrazinecarboxamide derivatives as potential elicitors of flavonolignan and flavonoid production in Silybum marianum and Ononis arvensis cultures in vitro was investigated. Both tested elicitors increased the production of flavonolignans in S. marianum callus and suspension cultures and flavonoids in O. arvensis callus and suspension cultures. Compound I, 5-(2-hydroxybenzoyl)-pyrazine-2-carboxamide, has shown to be an effective elicitor of flavonolignans and taxifoline production in Silybum marianum culture in vitro. The maximum content of silydianin (0.11%) in S. marianum suspension culture was induced by 24 h elicitor application in concentration of 1.159 × 10?3 mol/L. The maximum content of silymarin complex (0.08%) in callus culture of S. marianum was induced by 168 h elicitor application of a concentration 1.159 × 10?? mol/L, which represents contents of silydianin (0.03%), silychristin (0.01%) and isosilybin A (0.04%) compared with control. All three tested concentrations of compound II, N-(2-bromo-3-methylphenyl)-5-tert-butylpyrazin-2-carboxamide increased the flavonoid production in callus culture of O. arvensis in a statistically significant way. The best elicitation effect of all elicitor concentrations had the weakest c? concentration (8.36 × 10?? mol/L) after 168 h time of duration. The maximum content of flavonoids (about 5,900%) in suspension culture of O. arvensis was induced by 48 h application of c? concentration (8.36 × 10?? mol/L).     

Routing a mix of conventional,plug-in hybrid,and electric vehicles

We introduce an electric vehicle routing problem combining conventional, plug-in hybrid, and electric vehicles. Electric vehicles are constrained in their service range by their battery capacity, and may require time-consuming recharging operations at some specific locations. Plug-in hybrid vehicles have two engines, an internal combustion engine and an electric engine using a built-in rechargeable battery. These vehicles can avoid visits to recharging stations by switching to fossil fuel. However, this flexibility comes at the price of a generally higher consumption rate and utility cost.To solve this complex problem variant, we design a sophisticated metaheuristic which combines a genetic algorithm with local and large neighborhood search. All route evaluations, within the approach, are based on a layered optimization algorithm which combines labeling techniques and greedy evaluation policies to insert recharging stations visits in a fixed trip and select the fuel types. The metaheuristic is finally hybridized with an integer programming solver, over a set partitioning formulation, so as to recombine high-quality routes from the search history into better solutions. Extensive experimental analyses are conducted, highlighting the good performance of the algorithm and the contribution of each of its main components. Finally, we investigate the impact of fuel and energy cost on fleet composition decisions. Our experiments show that a careful use of a mixed fleet can significantly reduce operational costs in a large variety of price scenarios, in comparison with the use of a fleet composed of a single vehicle class.     

Optimal production mix

This paper deals with a production plant in which two different products can be produced. The plant consists of three subsystemsS _i . Before or after a phase of separate processing in subsystemsS ₁ andS ₂, the two products have to be processed in subsystemS ₃. Each of these subsystems has a limited capacity.In the first part, we assume empty stocks at the beginning; at a fixed timeT in the future, certain quantitiesX _i of the two products have to be delivered to the customers. Facing linear holding costs, convex production costs, and stringent capacity constraints, the problem is to decide when to produce which product at what rate.It is shown that the optimal solution consists of up to six different regimes and that the time paths of the production rates need not be monotonic. These results, which can be obtained analytically, are also illustrated in several numerical examples.Finally, the case is considered where the terminal demand at timeT is replaced by a continuous and seasonally fluctuating demand rate. It is demonstrated that the optimal production rates show an interesting and nontrivial behavior. In particular, it may happen that, on intervals where the demand for the one product increases, the optimal production rate decreases. This is also demonstrated by computer plots in some numerical examples.The first author gratefully acknowledges support from the Austrian Science Foundation under Grant S3204 and the second author from Stiftung Volkswagenwerk. An earlier version of this paper was presented at the DGOR-NSOR Joint Conference, Eindhoven, Holland, September 23–25, 1987.     

Steric Effects on Reaction Rates. Part IX. Force-Field Parameters for Bridgehead and Rigid Tertiary Carbenium Ions

Molecular-mechanics calculations for strain of carbenium ions are tested using Bentley's unified reactivity scale for bridgehead solvolysis as reference. Excellent correlations are obtained for solvolytic bridgehead reactivity with the calculated steric-energy difference (ΔE_st) between substrate (R? H or R? OH) and cation (R⁺). After adjustment of appropriate force-field parameters, the approach is successfully extended to the rigid, but planar cations derived from structures 15 – 20 ; however, the general set of parameters cannot be applied to highly strained systems such as the cation formed from 17 . With all of the 18 sets of parameters tested, the 2-endo-norbornyl derivative 16 , is adequately correlated, while the exo isomer 15 exhibits enhanced reactivity by a factor of ca. 10² to 10³.