In Vitro Light-Up Visualization of a Subunit-Specific Enzyme by an AIE Probe via Restriction of Single Molecular Motion

Enzymes contain several subunits to maintain different biological functions. However, it remains a great challenge for specific discrimination of one subunit over another. Toward this end, the fluorescent probe TPEMA is now presented for highly specific detection of the B subunit of cytosolic creatine (CK) kinase isoenzyme (CK-B). Owing to its aggregation-induced emission property, TPEMA shows highly boosted emission toward CK-B with a fast response time and very low interference from other analytes, including the M subunit of CK (CK-M). With the aid of a Job plot assay, ITC assay and molecular dynamics simulation, it was directly confirmed that the remarkably enhanced fluorescence of TPEMA in the presence of CK-B results from the restriction of single molecular motion in the cavity. Selective wash-free fluorescence imaging of CK-B in macrophages under different treatments was successfully demonstrated.     

Adaptive trajectory tracking of magnetostrictive actuator based on preliminary hysteresis compensation and further adaptive filter controller

An adaptive dynamic surface control (DSC) scheme is proposed for the multi-input multi-output attitude control of near-space hypersonic vehicles (NHV). The proposed control strategy can improve the control performance of NHV despite uncertainties and external disturbances. The proposed controller combines dynamic surface control and radial basis function neural network (RBFNN) and is designed to control the longitudinal dynamics of NHV. The DSC technique is used to handle the problem of “explosion of complexity” inherent to the conventional backstepping method. RBFNN is used to approximate the unknown nonlinear function, and a robustness component is introduced in the controller to cancel the influence of compound disturbance and improve robustness and adaptation of the system. Simulation results show that the proposed strategy possesses good robustness and fast response.     

Adsorption isotherms and kinetics of methylene blue on a low-cost adsorbent recovered from a spent catalyst of vinyl acetate synthesis

A regenerated activated carbon used as catalyst support in the synthesis of vinyl acetate has been tested as a low-cost adsorbent for the removal of dyes. After a thorough textural characterization of the regenerated activated carbon, its adsorption isotherms and kinetics were determined using methylene blue as model compound at different initial concentrations. Both Langmuir and Freundlich isotherm models were developed and then compared. It was found that the equilibrium data were best represented by the Langmuir isotherm model. The kinetic data were fitted to pseudo-first-order, pseudo-second-order and intraparticle diffusion models, and it was found that the best fitting corresponded to the pseudo-second-order kinetic model. The results showed that this novel adsorbent had a high adsorption capacity, making it suitable for use in the treatment of methylene blue enriched wastewater.     

Frequency splitting phenomenon of dual transverse modes in a Nd:YAG laser

We observed frequency splitting phenomenon of dual transverse modes (TEM_00q and TEM_01q) in a Nd:YAG microchip standing wave laser utilizing intracavity stress birefringence effects. Four resonance frequencies (ν_00qe, ν_00qo, ν_01qe, and ν_01qo, respectively) were produced and tuned by changing the diametral compression force applied on the laser crystal. The transverse mode frequency spacing for the same longitudinal mode number (Δν_trans) was 1.16 GHz, and the magnitude of frequency splitting (Δν) ranged from 0 MHz to 1.16 GHz. Based on this phenomenon, a four-mode differential standing wave laser, whose signal characteristics were a little like those of a four-mode differential travelling wave laser gyro however with a much larger frequency splitting range, was produced. The theoretical analysis is in good agreement with the experimental results. This phenomenon not only can be used to make lasers with two or more frequency differences, but also can be used to make high-resolution self-sensing laser sensors (e.g. laser force sensors and laser accelerometers).     

Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium

Statistically Optimal Nearfield Acoustical Holography (SONAH) can be used to reconstruct three-dimensional sound fields by projecting two-dimensional data measured on a “small” aperture that partially covers a composite sound source in a “static” fluid medium. Here, an improved SONAH procedure is proposed that includes the mean flow effects of a moving fluid medium while the sound source and receivers are stationary. The backward projection performance of the proposed procedure is further improved by using a wavenumber filter to suppress subsonic noise components. Through numerical simulations at Mach 0.6, it is shown that the improved procedure can accurately reconstruct sound source locations and radiation patterns: e.g., the spatially averaged reconstruction errors of the conventional and improved SONAH procedures are 15.40 dB and 0.19 dB, respectively, for a monopole simulation and 21.60 dB and 0.19 dB for an infinite-size panel. The wavenumber filter further reduces spatial noise, e.g., decreasing the reconstruction error from 1.73 dB to 0.19 dB for the panel simulation. An existing data measured in a wind tunnel operating at Mach 0.12 is reused for the validation. The locations and radiation patterns of the two loudspeakers are successfully identified from the sound fields reconstructed by using the proposed SONAH procedure.     

Faithful Entanglement Sharing for Quantum Communication Against Collective Noise

We present an economical setup for faithful entanglement sharing against collective noise. It is composed of polarizing beam splitters, half wave plates, polarization independent wavelength division multiplexers, and frequency shifters. An arbitrary qubit error on the polarization state of each photon in a multi-photon system caused by the noisy channel can be rejected, without resorting to additional qubits, fast polarization modulators, and nondestructive quantum nondemolition detectors. Its success probability is in principle 100%, which is independent of the noise parameters, and it can be applied directly in any one-way quantum communication protocol based on entanglement.     

Synthesis of arylsulfonyl-substituted indolo[2,1-a]isoquinolin-6(5H)-one derivatives via a TBAI-catalyzed radical cascade cyclization

We have developed a metal-free radical cascade reaction of N-substituted 2-aryl indoles with readily available sulfonyl hydrazides for the rapid construction of arylsulfonyl-substituted indolo[2,1-a]isoquinolin-6(5H)-one derivatives. With the TBAI–TBHP catalytic system, a broad series of structurally diverse indolo[2,1-a]isoquinolin-6(5H)-one derivatives were obtained in moderate to excellent yields. The reaction features mild reaction conditions, operationally easiness, scaled-up feasibility, and high functional-group-tolerance.     

Highly sensitive sensor for detection of NADH based on catalytic growth of Au nanoparticles on glassy carbon electrode

In this work, an electrochemical dihydronicotinamide adenine dinucleotide (NADH) sensor based on the catalytic growth of Au nanoparticles (Au NPs) on glassy carbon electrode was developed. Catalyzed by Au NPs immobilized on pretreated glassy carbon electrode, the reduction of AuCl₄ ^? in the presence of hydroquinone and cetyltrimethyl ammonium chloride led to the formation of enlarged Au NPs on the electrode surface. Spectrophotometry and high-resolution scanning electronic microscope (SEM) analysis of the sensor morphologies before and after biocatalytic reaction revealed a diameter growth of the nanoparticles. The catalytic growth of Au NPs on electrode surface remarkably facilitated the electron transfer and improved the performance of the sensor. Under optimal conditions, NADH could be detected in the range from 1.25?×?10^?6 to 3.08?×?10^?4 M, and the detection limit was 2.5?×?10^?7 M. The advantages of the proposed sensor, such as high precision and sensitivity, fast response, low cost, and good storage stability, made it suitable for on-line detection of NADH in complex biological systems and contaminant degradation processes.

Inhibiting Ion Migration Through Chemical Polymerization and Chemical Chelation Toward Stable Perovskite Solar Cells

The migration of ions is known to be associated with various detrimental phenomena, including current density-voltage hysteresis, phase segregation, etc., which significantly limit the stability and performance of perovskite solar cells, impeding their progress toward commercial applications. To address these challenges, we propose incorporating a polymerizable organic small molecule monomer, N-carbamoyl-2-propan-2-ylpent-4-enamide (Apronal), into the perovskite film to form a crosslinked polymer (P-Apronal) through thermal crosslinking. The carbonyl and amino groups in Apronal effectively interact with shallow defects, such as uncoordinated Pb²⁺ and iodide vacancies, leading to the formation of high-quality films with enhanced crystallinity and reduced lattice strain. Furthermore, the introduction of P-Apronal improves energy level alignment, and facilitates charge carrier extraction and transport, resulting in a champion efficiency of 25.09 %. Importantly, P-Apronal can effectively suppress the migration of I⁻ ions and improve the long-term stability of the devices. The present strategy sets forth a path to attain long-term stability and enhanced efficiency in perovskite solar cells.