CaTiO3基微波介质陶瓷的频率温度稳定性

通过对克劳修斯-莫索蒂方程的近似, 分析了钙钛矿结构微波介质陶瓷频率温度系数 (τ_f) 的主要影响因素, 发现改变材料介电响应中离子位移极化和电子位移极化的比例, 可调节频率温度系数的正负与大小. 通过电子结构计算和容忍因子分析, 预测引入(Zn_1/3Nb_2/3)⁴⁺对具有正温度系数 的CaTiO₃进行B位取代将提高材料电子极化响应比例, 调节τ_f由正变负. 采用偏铌酸盐为前驱体, 通过固相反应法合成了Ca[(Zn_1/3Nb_2/3)_xTi_(1-x)]O₃钙钛矿结构陶瓷, 并对其进行结构分析和性能测试, 实验结果与理论分析一致, 获得了具有近零频率温度系数的Ca[(Zn_1/3Nb_2/3)_0.7Ti_0.3]O₃介质陶瓷材料. 关键词： B位复合钙钛矿陶瓷 谐振频率温度稳定性 极化机理 6八面体倾斜')" href="#">BO₆八面体倾斜     

基于宽边耦合螺旋结构的低频小型化极化不敏感超材料吸波体

设计、仿真并实验验证了基于宽边耦合螺旋结构的低频小型化超材料吸波体. 实验测试结果表明, 该超材料吸波体在1.39 GHz吸收率达到最大为98%, 其单元尺寸和总厚度均为6.8 mm, 约为1/32工作波长, 实现小型化窄带吸波. 由于吸波体中螺旋结构是旋转对称排列的, 因而其对垂直入射电磁波的极化方向是不敏感的. 此外, 该超材料吸波体对斜入射横电和横磁极化电磁波在60°时, 仍具有强吸收. 关键词： 超材料 吸波体 小型化     

基于扩频码的单载波迭代频域均衡水声通信

单载波时域均衡在长时延扩展水声信道中计算量大,并对接收机参数的选择较为敏感,可靠性低,而正交频分复用信号峰均功率比高、对频率偏移敏感. 针对这些问题,提出基于扩频码的单载波块传输高速率水声通信方法和基于T/4分数间隔迭代频域均衡的接收机算法. 该接收机利用已知扩频码进行信道估计以及对由多普勒偏移引起的旋转相位进行估计,并通过一种低复杂度迭代频域均衡算法改善系统性能. 开展了湖上实验研究,结果表明在浅水1.8 km距离且复杂多径干扰条件下,利用BPSK/QPSK调制可实现10^-2–10^-4的误码率并达到1500–3000 bit/s的有效数据率. 关键词： 水声通信 单载波 频域均衡 迭代处理     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Relationship between Dispersive Surface Tension and Density and Molecular Weight of Solvents and Polymers

The surface and interfacial properties of polymers are important for their applications. Generally, the surface property is quantitatively characterized by the surface tension or surface tension component parameters, which are obtained with the contact angle technique. However, the contact angle technique has an inherent problem, contact angle hysteresis phenomenon, which will result in many incredible surface tension data. In order to find a simple and easy method to estimate the rationality of a surface tension result, the relationship between dispersive surface tension component and density and molecular weight is researched in this work. It is found that for 30 organic solvents, there is a good relationship between the dispersive surface tension r^d and the parameter . In addition, for 12 polymers, when the molecular weight is replaced with the molecular weight of the repeat unit, there is still the same relationship as for small liquids. However, because it is difficult to judge the accuracy of the published dispersive data of the polymers, the found experiential relationship needs further confirmation, requiring more reliable published data.     

A New Equation between Surface Tensions and Solubility Parameters without Molar Volume Parameters Simultaneously Fitting Polymers and Solvents

Both surface tension and solubility parameter are decided by molecular interactions. There are several empirical equations describing their connection. However, at least two limitations exist for them: polymers cannot be treated and only apolar or weakly polar solvents can be fitted. We found when only the dispersive properties were considered, for 37 solvents and 22 polymers, a linear relationship exists between γ ^d and γ/δ^2/3 _d , fitted by a new equation. Compared with the previous equations, the value of the new equation is that most solvents and common polymers could be treated simultaneously. This equation will be of value for estimating the accuracy of reported surface tension data or solubility parameters of polymers.     

Isothermal Crystallization Kinetics and Melting Behavior of a Luminescent Conjugated Polymer,Poly(9,9-Dihexylfluorene-Alt-2,5-Didodecyloxybenzene)

A study of the isothermal crystallization behaviors of poly(9,9-dihexylfluorene-alt-2,5-didodecyloxybenzene) (PF6OC12) was carried out using differential scanning calorimetry (DSC). The crystallization kinetics under isothermal conditions could be described by the Avrami equation. The Avrami exponent n ranges from 3.43 to 3.71 for PF6OC12 at crystallization temperatures between 100.0°C and 90.0°C, indicating a three-dimensional spherical crystal growth with homogeneous nucleation in the primary crystallization stage for the isothermal melt crystallization process. In the DSC scan, after the isothermal crystallization, multiple melting behavior was found. The multiple endotherms could be attributed to melting of recrystallized materials produced originally during different crystallization processes. According to the Arrhenius equation, the activation energy was determined to be 211.29 kJmol^?1 for the isothermal melt crystallization of PF6OC12.     

Effect of β-Nucleating Agent on the Crystallization,Mechanical Properties,and Heat Resistance of Injection-Molded Isotactic Polypropylene

Injection-molded β-isotactic polypropylene (β-iPP) was prepared with a commercial β-nucleating agent (NT-A). The effect of NT-A on the crystallization, mechanical properties, and heat resistance of β-iPP was investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), polarized light microscopy (PLM), and mechanical and heat deflection tests. DSC and WAXD analysis showed that the content of β-crystals in the nucleated iPP was higher than that of pure iPP, and the content of β-crystals of the core was higher than that of the skin. PLM observations showed that injection-molded iPP had an obvious skin-core structure. NT-A induced abundant β-crystals and resulted in small spherulites which improved the Izod notched impact strength. When the content of NT-A was 0.075wt%, the Izod notched impact strength reached a maximum, 2.6 times more than that of pure iPP. The heat distortion temperature was also improved by NT-A.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.