基于相交不稳定性的尾流自消散机翼实验研究

飞机尾流是复杂的流动现象,相关控制的研究常采用简化模型,抓住主要矛盾进行尾流不稳定性的学术探索. 采用结构化矩形机翼模型,通过添加扰流片来模拟襟翼的一种作动方式,引入一对与主翼涡反向的小涡,以期诱发尾涡的瑞利-路德维希相交不稳定性. 改变模型在水槽中的拖曳速度以及机翼攻角,采用粒子图像速度场仪定量研究单主翼尾涡发展特性以及双涡相互作用特性. 研究表明,未添加扰流片时,尾涡环量在45 个翼展内相对于初始环量衰减了10%;而添加了扰流片的实验中,在较好的实验参数组合情况下,主翼尾涡环量较初始环量降低35%~45%. 结果表明添加适当扰流片产生的反向小涡能诱发与主翼尾涡的相交不稳定性,在尾流涡系中引入自消散机制,加速机翼尾涡的消散过程,达到提早消弱尾涡的目的.      

2,3-二芳基-1,3-苯并噁嗪的合成及杀菌活性

在三甲基氯硅烷(TMSCl)的催化作用下,取代苯甲醛与邻(芳胺甲基)苯酚经N杂缩醛化反应生成了一系列2,3-二芳基-1,3-苯并噁嗪类化合物。 目标化合物的结构用IR、¹H NMR、¹³C NMR和元素分析等技术手段进行了表征。 对所合成的化合物进行了初步杀菌活性测试,部分表现出良好的杀菌活性,化合物6e对菌核病菌的抑制活性为79.0%,化合物6a和6d均为74.8%,化合物6e对灰霉病菌的抑制活性为77.9%。     

高分子在溶液中的链叠加度

从高分子线团密度存在浓度依赖性角度出发,导出了从稀溶液至浓溶液范围内高分子链叠加度与浓度的定量关系式.以链叠加度为高分子溶液的结构参数,关联了文献中6种分子量的聚氯丁二烯在不同溶剂和温度条件下溶液相对黏度的变化.这表明,高分子溶液的宏观性质与溶液中高分子链叠加度这一微观结构参数密切相关.     

Poly(vinyl alcohol)/polyelectrolyte complex blend membrane for pervaporation dehydration of isopropanol

Poly(vinyl alcohol) (PVA) was blended with soluble polyelectrolyte complex (PEC) made from poly(diallyldimethylammonium chloride) (PDDA) and sodium carboxymethyl cellulose (CMCNa). Crystallinity, thermal transition, and thermal stability of the PVA/PEC blends were characterized by using wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermal gravity analysis (TGA), respectively. Surface morphology, cross-section and phase structure of the blend membranes were examined by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). Surface hydrophilicity and swelling behavior of the blend membranes were examined by water contact angle (CA) and swelling tests. Blend membranes were subjected to isopropanol dehydration, and effects of blend composition, feed composition and feed temperature on pervaporation performance are discussed in terms of phase structures of blend membranes. A performance of J = 1.35 kg/m² h, α = 1002, was obtained for blend membrane containing 50 wt% PEC in dehydrating 10 wt% water–isopropanol at 70 °C.     

Layer-by-layer self-assembly of polyelectrolyte complexes and their multilayer films for pervaporation dehydration of isopropanol

Two negatively charged polyelectrolyte complex colloidal nanoparticles (PEC⁻) and one positively charged nanoparticle (PEC⁺) were prepared and used as novel layer-by-layer (LbL) building blocks. These PEC nanoparticles include poly(2-methacryloyloxy ethyl trimethylammonium chloride)/sodium carboxymethyl cellulose (PDMC/CMCNa PEC⁻), poly(diallyldimethylammonium chloride)/CMCNa (PDDA/CMCNa PEC⁻) and PDDA/poly(sodium-p-styrenesulfonate) (PDDA/PSS PEC⁺). LbL multilayer films based on (PEC⁺/PEC⁻) were constructed on both quartz slides and modified polyamide (MPA) reverse osmosis support membranes. UV–vis spectroscopy, quartz crystal microbalance (QCM), field emission scanning microscopy (FESEM) and atomic force microscopy (AFM) were utilized to follow the thickness growth and morphology evolution of these multilayer films with increasing bi-layer numbers. LbL multilayer films deposited on MPA support membranes were subjected to pervaporation dehydration of 10 wt% water–isopropanol and effect of bi-layer numbers and feed temperature on pervaporation performance was studied. Generally, PEC⁺/PEC⁻ can be LbL self-assembled successfully on both substrates with a thickness growth rate ca. 200 nm/bi-layer. Moreover, PEC⁺/PEC⁻ multilayer films show high pervaporation performance with film thickness up to several micrometers. For example, performance of the multilayer films in dehydrating 10 wt% water–isopropanol at 50 °C is J = 1.18 kg/m² h, α = 1013 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₄ and J = 1.36 kg/m² h, α = 938 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₅, respectively.     

Optimizing Dispersion,Exfoliation, Synthesis,and Device Fabrication of Inorganic Nanomaterials Using Hansen Solubility Parameters

Hansen solubility parameters (HSPs) were established by Hansen in 1967 and predict miscibility between different material systems. So far, HSP theory works across polymers, crystalline bulk solids and nanomaterials and can be used to identify single solvents or, more likely, blends of solvents that deliver not only the initial solubility but also control it during reaction processes. This minireview summarizes the recent progress on HSP theory to optimize dispersion, exfoliation, synthesis, and device fabrication of inorganic nanomaterials. First, we briefly introduce HSP theory and determination of HSPs. Then, we discuss in detail the utilization of HSPs for inorganic nanomaterials, focusing on carbon nanomaterials, two-dimensional non-graphene nanomaterials, and metal oxide nanoparticles. Finally, challenges and perspectives of HSP theory in inorganic nanomaterials are reviewed.     

Large Deviations and Ergodicity for Spin Particle Systems

In this paper we investigate the large deviation principle (LDP) for spin particle systems with possibly vanishing flip rates. The situation turns out to be much more complicated if the flip rates are allowed to be zero than the one considered by Dai, where the systems are assumed to have strictly positive flip rates. The upper and lower large-deviation bounds are studied, respectively. The two governing rate functions are compared and a variational principle is given. We then apply the results to obtain some new large-deviation estimates for the occupation times of attractive systems. In particular, we prove a strong form of exponential convergence for ergodic systems.     

核壳结构CdS/ZnS微米球表面处理与光催化制氢性能的关系

具有高活性和稳定性的半导体光催化材料是太阳能光催化制氢领域的研究热点,其中CdS胶体颗粒催化剂因其合适的禁带宽度和带边位置以及较低的原料价格而广受关注.但它在水溶液中不稳定,易受光腐蚀,因而限制了其应用.目前人们致力于用各种方法提高其稳定性,包括各种纳米结构的应用、复合其他催化剂材料以及不同晶相结构复合.ZnS是一种宽禁宽半导体,禁带宽度为3.6 eV,常被用来与CdS形成固溶体调控其能带结构,从而提高其性能和稳定性.其中核壳结构CdS/ZnS异质结具有骑跨型(I型)能带结构,具有特殊的光学和电学性质,在量子点LED和量子点生物荧光显示剂方面获得关注和应用,同时也显示了良好的光催化性能.研究人员对核壳结构CdS/ZnS异质结材料中ZnS壳层厚度对其光学性能包括荧光效率等的影响进行了研究,然而ZnS壳层厚度、颗粒尺寸及其表面处理对光催化性能影响方面的报道很少.本文发展了一种简易的两步法,制备了核壳结构CdS/ZnS微米球光催化剂.首先采用超声喷雾热分解法制备CdS微米球,然后以水浴法在CdS微米球上生长ZnS壳层.采用扫描电镜(SEM)、X射线衍射(XRD)、紫外-可见吸收光谱(UV-vis)和透射电镜(TEM)对所得样品进行了表征.SEM和TEM结果显示,所得微米球为完整包裹的球形核壳结构;XRD表征证实CdS核与ZnS壳层皆为六角相晶型;光催化性能表征结果显示,该样品的光催化制氢性能远高于单独的CdS微米球以及同法所制的ZnS微米球.通过改变前驱液浓度(Zn源浓度分别为0.2,0.3和0.5 mol/L)获得了三种不同厚度的核壳结构CdS/ZnS微米球,X射线荧光光谱结果证实了其壳层厚度成功调控.UV-vis结果发现,其吸收边由内核CdS决定,受壳层厚度的影响不大.光致荧光发射光谱分析发现,随着壳层厚度的增加,其540 nm处的CdS带边发射峰强度逐渐增大.这可能是由于ZnS壳层对CdS表面缺陷的钝化作用降低了其非辐射复合过程,从而提高了荧光发光效率.光催化制氢性能结果表明,前驱液浓度为0.3 mol/L时合成的核壳结构CdS/ZnS微米球的产氢效率最高.为了进一步提高其光催化效率,采用氮气中高温热处理、水热二次硫化法以及两者共用三种方式对性能最优的微米球进行改性,获得了三种核壳结构CdS/ZnS样品.结果发现,这些改性方法未影响其吸收边,但水热二次硫化法处理以及两者共用处理的样品在540 nm处的光致荧光发射峰强度明显高于未处理的和高温热处理的样品,证实水热二次硫化法处理可以有效地消除其表面缺陷,减少非辐射复合.XRD结果表明其晶型没有发生变化.TEM表征发现,经高温热处理后其壳层发生重结晶,形成颗粒包裹形貌,而经水热二次硫化法处理后其壳层同样发生重结晶,但包裹颗粒的尺寸明显更小.光催化性能测试表明,处理后样品的光催化性能皆优于未处理样品,其中两者共用法处理的样品产氢性能和稳定性最高.     

Stereoselective synthesis of α,α-difluoro-β,γ-alkenyl ketones by free-radical reaction of iododifluoromethyl ketones with alkynes

A method for stereoselective synthesis of α,α-difluoro-γ-iodo-β,γ-alkenyl ketones via radical difluoroacetylation of iododifluoromethyl ketones with terminal and internal alkynes was reported. This methodology provides a straightforward access to 3,3-disubstitued allylic difluorides.     

A Variational Principle for Markov Processes

In this note, we first present a result concerning a variational principle for general Markov processes. Then we apply it to spin particle systems to obtain a full form of a variational principle characterizing the stationary Markov laws of the systems. A related extreme decomposition for any stationary distribution of such Markov systems is also given.