Temperature effect on the evolution and stability of rigid screening spatial soliton in biased photorefractive crystal

Based on the temperature dependence of two-wave mixing, temperature effects on the dynamical evolution and stability of rigid screening (RS) bright solitons in a photorefractive dissipative system based on two-wave mixing have been investigated numerically. Our results indicate that the stability of bright RS solitons depends strongly on the crystal temperature. The RS solitons are stable to small temperature perturbations. They will not evolve into stable rigid screening solitons, however, and their intensity and width vary with the propagation distance if the temperature deviation is large enough. The potential applications of the temperature properties of these RS solitons in optical attenuators or repeaters are discussed.     

Enantiomeric separation of chiral pesticides by high performance liquid chromatography on cellulose tris-3,5-dimethyl carbamate stationary phase under reversed phase conditions

Twenty chiral pesticides were tested, of which seven samples were directly separated by HPLC using cellulose tris-3,5-dimethyl carbamate (CDMPC) chiral stationary phase under RP conditions. The influence of mobile phase composition and column temperatures from 0 degrees C to 40 degrees C on the separations were investigated. The mobile phases were methanol/water or ACN/water at a flow rate of 0.8 mL/min with UV detection at 230 or 210 nm. Epoxiconazole, terallethrin, benalaxyl, and diclofopmethyl were observed to obtain the baseline separation under suitable conditions and other pesticides pyriproxyfen, lactofen, and quizalofop-ethyl were separated partially. The retention factors (k) and selectivity factor (alpha) for the enantiomers of most investigated pesticides decreased upon increasing the temperature except for the selectivity factors (alpha) of pyriproxyfen in methanol/water. The ln alpha - 1/T plots for racemic chiral pesticides were linear at the range of 0-40 except for that of pyriproxyfen enantiomers in methanol/water and the chiral separations were controlled by enthalpy. Better separations were not always at low temperature. The elution orders of the eluting enantiomers were determined by a circular dichroism (CD) detector.     

Optimization and Comparative Study of Different Extraction Methods of Sixteen Fatty Acids of Potentilla anserina L. from Twelve Different Producing Areas of the Qinghai-Tibetan Plateau

In this study, supercritical fluid extraction (SFE), ultrasonic-assisted extraction (UAE), and microwave-assisted extraction (MAE) were applied to explore the most suitable extraction method for fatty acids of Potentilla anseris L. from 12 different producing areas of the Qinghai-Tibetan Plateau. Meanwhile, the important experimental parameters that influence the extraction process were investigated and optimized via a Box-Behnken design (BBD) for response surface methodology (RSM). Under optimal extraction conditions, 16 fatty acids of Potentilla anserina L. were analyzed via high-performance liquid chromatography (HPLC) with fluorescence detection, using 2-(4-amino)-phenyl-1-hydrogen-phenanthrene [9,10-d] imidazole as the fluorescence reagent. The results showed that the amounts of total fatty acids in sample 6 by applying SFE, UAE, and MAE were, respectively, 16.58 ± 0.14 mg/g, 18.11 ± 0.13 mg/g, and 15.09 ± 0.11 mg/g. As an environmental protection technology, SFE removed higher amounts of fatty acids than did MAE, but lower amounts of fatty acids than did UAE. In addition, the contents of the 16 fatty acids of Potentilla anserina L. from the 12 different producing areas Qinghai-Tibetan Plateau were significantly different. The differences were closely related to local altitudes and to climatic factors that corresponded to different altitudes (e.g., annual mean temperature, annual mean precipitation, annual evaporation, annual sunshine duration, annual solar radiation.). The temperature indices, photosynthetic radiation, ultraviolet radiation, soil factors, and other factors were different due to the different altitudes in the growing areas of Potentilla anserina L., which resulted in different nutrient contents.     

Targeted isolation of 1,1-diphenyl-2-picrylhydrazyl inhibitors from Saxifraga atrata and their antioxidant activities

Saxifraga atrata is an important traditional Tibetan medicine used to treat cough and pneumonia, and has tremendous medicinal potential. In this study, we devised a technique to separate 1,1-diphenyl-2-picrylhydrazyl inhibitors from a methanol extract of S. atrata. The material was first processed using MCI GEL CHP20P medium-pressure liquid chromatography, yielding 1.1 g of the target fraction Fr2. Subsequently, online hydrophilic interaction liquid chromatography-1,1-diphenyl-2-picrylhydrazyl assay was used to identify prospective 1,1-diphenyl-2-picrylhydrazyl inhibitors, and two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25) were identified from Fr2. Then, medium-pressure preparation was continued using an XIon column to separate two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25). The target compound was concentrated in fractions Fr24 and Fr25 using reverse-phase liquid chromatography during further separation procedures. Finally, the purity, structure, and 1,1-diphenyl-2-picrylhydrazyl inhibitory activity of the isolated 1,1-diphenyl-2-picrylhydrazyl inhibitors were determined. Two 1,1-diphenyl-2-picrylhydrazyl inhibitors (adenosine with the half maximal inhibitory concentration of 66.87 ± 14.33 μM and (-)-4-O-(E)-caffeoyl-l -threonic acid with the half maximal inhibitory concentration of 59.06 ± 5.02 μM) were isolated with purities exceeding 95%. The results showed that this technology is effective in the targeted separation of antioxidants from natural products.     

Synthesis and thermal behavior of a novel UV‐curable transparent flame retardant film and phosphorus‐nitrogen synergism of flame retardancy

A novel phosphorus monomer (PDHA) has been synthesized through phenyl dichlorophosphate (PDPC) reacting with 2‐hydroxyethyl acrylate (HEA). The structure of PDHA was characterized by Fourier transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance spectroscopy (¹H NMR). A series of UV curable resins were manufactured by blending PDHA with triglycidyl isocyanurate acrylate (TGICA) at different weight ratios. The fire performance was examined by micro‐scale combustion calorimeter (MCC) and limiting oxygen index (LOI). The results obtained from MCC indicated that the addition of PDHA to TGICA reduced the HRR and HRC. In addition, the LOI values varied from 28 to 34. The char residues of the composites were observed by scanning electron microscopy (SEM). Their thermal degradation behavior was investigated by thermogravimetric analysis and real time FTIR analysis (RT‐FTIR). The test results indicated that when the weight ratio of PDHA/TGICA = 1:1, the onset temperature of the composite was highest and the most char residue at 700°C was observed. RT‐FTIR showed that the phosphate group of PDHA first degraded to form poly(phosphoric acid)s at around 300°C, which had the major contribution to form the compact char to protect the sample from further degradation. Copyright © 2010 John Wiley & Sons, Ltd.     

Finite-time boundedness of uncertain Hamiltonian systems via sliding mode control approach

Nonlinear Dynamics - This paper seeks to address the problem of finite-time stabilization for a class of uncertain Hamiltonian systems via sliding mode control approach. A novel sliding function in...     

Nonlinear singular traveling waves in a slightly compressible thermo-hyperelastic cylindrical shell

Nonlinear Dynamics - In this paper, we present a novel methodology for nonlinear dynamic analysis of chemical processes that are posed as differential–algebraic equations (DAE) systems. With...     

Gas–liquid two phase flow measurement method based on combination instrument of turbine flowmeter and conductance sensor

In order to solve the flowrate measurement problem of gas–liquid two phase flow widely existing in gas wells of Daqing oil field in China, a new method has been developed, which is based on the combination instrument of turbine flowmeter and conductance sensor with petal type concentrating flow diverter. The turbine and conductance signals under 104 different flow conditions have been acquired through oil–gas–water three phase flow loop experimental facility. To determine the flow pattern in measurement channel, attractor morphologic characteristics are extracted from the conductance signals. For the total flowrate measurement, based on the turbine fluctuant signals of gas–liquid two phase flow, a statistical model with the average error of 7.9% is set up. With regard to the water cut measurement, the characteristics in time and frequency domains are extracted from the fluctuant conductance signals, and then employing the Support Vector Machine (SVM) soft measurement model used in high-dimension data fitting, the water cut prediction is realized with the average error of 0.038. The results show that the combination instrument of turbine flowmeter and conductance sensor with petal type concentrating flow diverter would be useful in measuring the total flowrate and water cut of gas–liquid two phase flow in gas production wells.     

2D-C/SiC拉伸损伤的声发射信号聚类分析

对2D-C/SiC复合材料进行常温拉伸试验,利用声发射(AE)仪在线监测其损伤过程.应用K-均值聚类算法对AE信号进行模式识别,结合扫描电镜观察,发现2IC/SiC复合材料拉伸过程的损伤模式包括基体开裂、界面层脱粘、层间剥离、纤维断裂以及纤维束断裂等,并得到了各种损伤模式AE信号参数的中心值.通过对不同损伤模式AE累积事件数和累积能量随时间变化的统计分析,描述了2DC/SiC复合材料拉伸损伤演化过程.