Cone-shaped structures of GeO2 fabricated by a thermal evaporation process

We have synthesized cone-like GeO₂ structures via thermal heating of Ge powders. We have investigated the effects of substrate temperature on the sample morphology, revealing that cone-shaped structures are preferentially obtained at higher temperature. The cone-shaped structures, which gradually become thinner to form a sharp tip, appear to be a single-crystalline, hexagonal structure of GeO₂. Room-temperature photoluminescence measurement revealed two emission peaks, at about 2.78 and 3.04 eV.     

Magnetic and noise properties of as-deposited and annealed soft underlayer

We studied the magnetic and noise properties with various soft underlayer (SUL) types. For an as-deposited SUL, the results of spectrum, oscilloscope waveform and MFM indicated that the SUL types with IrMn pinning layer have more noise level than that of SUL types without IrMn pinning layer. And, after magnetic filed annealing along radial direction of disk, the exchange bias field increased and the noise level of type B (exchange bias type) decreased. These results reveal that incomplete or partial coupling may be generated at the interface between IrMn and ferromagnetic layer in as-deposited SUL. This incomplete coupling may result in complex or multidomain patterns in ferromagnetic layer.     

Growth of InN films and nanorods by H-MOVPE

InN films and nanorods were grown by hydride metalorganic vapor phase epitaxy (H-MOVPE) and the effects of growth temperature, and NH₃/TMIn and HCl/TMIn ratios on morphological dependences were studied. The growth habit of InN varied from thin film to microrod to nanorod to no deposition as the growth conditions were changed about transition from growth to etching conditions. The growth and etch regimes were also predicted by chemical equilibrium calculations of In–C–H–Cl–N-inert system. The optical properties of InN nanorods and columnar structured films were measured by room temperature PL and a maximum intensity was observed at 1.08 eV for both structures.     

Increased and balanced light emission of transparent organic light-emitting diodes by enhanced microcavity effects

We report on improved and controlled light outcoupling of transparent organic light-emitting diodes (TOLEDs) by inserting thin silver layers between the indium tin oxide anode and the hole transporting layer. The introduction of Ag layers influences both the bottom and top emission of the TOLEDs, and it results in dramatic changes in the electroluminescence spectra and angular distribution. We find that the overall external quantum efficiency can be increased up to 18.8%, and the ratio of bottom and top emission can be almost identical.     

Observation of a new DsJ meson in B+-->D0D0K+ decays

We report the observation of a new DsJ meson produced in B+-->D0DsJ-->D0D0K+. This state has a mass of M=2708+/-9(-10)(+11) MeV/c2, a width Gamma=108+/-23(-31)(+36) MeV/c2 and a 1- spin-parity. The statistical significance of this observation is 8.4 sigma. The results are based on an analysis of 449 x 10(6) BB events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider.     

Investigating magnetorheological properties of a mixture of two types of carbonyl iron powders suspended in an ionic liquid

In this work, properties of a magnetorheological (MR) fluid, prepared by dispersing a mixture of two types of carbonyl iron powders (CIPs) of different sizes, in an ionic liquid (N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate) that is stable from 9 °C to ca. 300 °C, have been investigated. At first, the random packing density of the mixture was computed as function of mixing ratio of CIP, in order to find out the tendency of the variation. Next, several mixtures, all having the same weight, were prepared at various mixing ratios and dispersed in the ionic liquid, in order to experimentally find the most suitable mixing ratio of CIP. Then, the magnetic clusters of the synthesized MR fluids were observed by using a digital microscope equipped with two permanent magnets, whereas the MR properties were investigated by using a rotation viscometer equipped with a solenoid coil. The experimental results pointed out that the MR fluid with 60 wt% fraction of large particles exhibited the highest MR response.     

Effect of irradiation on the cryogenic mechanical characteristics of polyurethane foam

The present study investigated thermal and mechanical characteristics of irradiated polyurethane foams (PUFs) according to the irradiation does under various temperature conditions, including low/cryogenic temperatures. Fourier transform infrared analysis was performed to obtain information on the PUF molecular structure. In addition, Macro- and microstructural investigations were carried out to determine the relationship between thermal and mechanical characteristics and irradiation dose. The test results were quantitatively presented, and it was found that the irradiated PUF has potential for application in industrial structures.     

Directional Self‐Assembly of Fluorinated Star Block Polymer Thin Films Using Mixed Solvent Vapor Annealing

We demonstrate the directional alignment of perpendicular‐lamellae domains in fluorinated three‐armed star block polymer (BP) thin films using solvent vapor annealing with shear stress. The control of orientation and alignment was accomplished without any substrate surface modification. Additionally, three‐armed star poly(methyl methacrylate‐block‐styrene) [PMMA‐PS] and poly(octafluoropentyl methacrylate‐block‐styrene) were compared to their linear analogues to examine the impact of fluorine content and star architecture on self‐assembled BP feature sizes and interdomain density profiles. X‐ray reflectometry results indicated that the star BP molecular architecture increased the effective polymer segregation strength and could possibly facilitate reduced polymer domain spacings, which are useful in next‐generation nanolithographic applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1663–1672     

Stoichiometry-Controlled Synthesis of Nanoparticulate Mixed-Metal Oxyhydroxide Oxygen Evolving Catalysts by Electrochemistry in Aqueous Nanodroplets

Mixed-metal oxyhydroxides—especially those of Ni and Fe—are one of the most active classes of materials known for catalyzing the oxygen evolution reaction (OER). Here, nanoparticulate mixed metal oxyhydroxides (of Ni, Fe, and Co) were prepared on an electrode surface by electrochemical reaction of a precursor solution encapsulated in aqueous nanodroplets (AnDs), with each of the droplets containing 10 s of attoliters of fluid. Electrode reactions and synthesis can be monitored in situ by electrochemistry as single AnD stochastically lands and interacts with the working electrode. Resultant metal oxyhydroxide nanoparticles can be size and composition controlled precisely by modulating the precursor solution stored in the AnD. Nanoparticulate metal oxyhydroxides were implemented as catalysts for the OER and exhibited superior catalysis compared to their thin-film counterparts, demonstrating a hundred-thousand-fold enhancement in atom efficiency at comparable turnover rates.