Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

Study on deactivation and regeneration of Pd/Al2O3 catalyst in hydrogen peroxide production by the anthraquinone process

Deactivated palladium catalysts in the hydrogenation of anthraquinione were regenerated with ethanol, nitric acid, hydrogen peroxide, boiling water and steam, respectively. The deactivated and regenerated catalysts were characterized by XPS, ICP, TG, FTIR, TPD, XRD, etc., and studied in the hydrogenation of anthraquinone. The results showed that the main cause of catalyst deactivation is the coverage of the active component by deposits. The treatments by hydrogen peroxide and boiling water can effectively regenerate the deactivated catalysts. This revised version was published online in August 2006 with corrections to the Cover Date.     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

某些类氖离子和类镍离子等离子体状态对应关系的研究

利用一维拉格朗日流体动力学程序Med103详细研究了产生类镍Ag,Cd,In,Sn, Sb离子和类氖Fe,Co,Ni,Cu,Zn离子的等离子体状态.通过对电子温度、离子丰度、离子数密度等状态参量的分析比较，得到了这两类等离子体状态之间的对应关系.即类镍银的等离子体状态与类氖铁 的相近，类镍镉的与类氖钴的相近，依次类推.利用这一对应关系可以方便地由类氖机理x射线激光的等离子体状态来对相应元素的类镍x射线激光的等离子体状态进行判断. 关键词： 类氖 类镍 等离子体状态 x射线激光     

吡罗红为底物的辣根过氧化物酶催化荧光反应测定葡萄糖

吡罗红在辣根过氧化物酶催化下可被过氧化氢氧化而使其荧光猝灭。在pH 7.2中性介质中,稳态催化速率由酶和底物浓度决定,催化体系服从Michaelis-Menten方程,用Lineweaver-Burk作图法求得米氏常数、最大反应速度、催化常数分别为2.4×10~(-5)mol·L-1,2.5×10~(-6)mol·L-1s-1,75.8 s-1。在最佳反应条件下,荧光F0/F的猝灭程度与过氧化氢浓度在0-3.6×10~(-7)mol·L-1范围内成线性关系,检测限为6.3×10~(-9)mol·L-1;当与葡萄糖氧化酶联用时,可定量检测葡萄糖,线性关系为0-8.0×10~(-7)mol·L-1,检测限为3.4×10~(-8)mol·L-1。方法用于分析人血清中葡萄糖含量,分析结果与苯酚-4-氨基安替比林法基本一致。     

电信运营市场上过度进入的供给分析

本文在分析光纤主干网和本地接入服务市场上电信运营商的供给行为的基础上,首先证明了拥有主干网的运营商愿意租出自己的部分光纤,接着分析证明了上述两市场上使投资更倾向于过度的乘数效应,并进一步证明网络外部性使乘数效应更加明显.旨在对我国电信运营市场发展给出一些参考意见.     

核磁共振弛豫速率方法测定模拟正铁色素的结构

在生命体系内正铁色素具有摄铁和输铁的功能,人工合成的模拟化合物具备了正铁色素的主要功能基团和相近的性质.本工作利用铁(Ⅲ)离子的顺磁性质,测定不同铁(Ⅲ)离子浓度下模拟正铁色素的诱导弛豫时间,根据简化了的Solomon—B1oemoergen公式,计算出铁(Ⅲ)离子到所有被测质子(即氢原子)的相对距离,比较清楚地得到模拟正铁色素在溶液中的构象。     

横向位移双曝光散斑图维纳谱的信息分布

讨论了横向位移双曝光散斑图维纳谱的信息分布，并由此导出杨氏纹图的一般表达式。讨论了条纹可见度与应变，面内转动，照明光束直径与条纹图图空间坐标的关系，指出了在条纹可见度影响下最大可见条纹数目。还讨论了散斑衬比与衍射晕的关系。     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO₄)₂ with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm’s. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO₄)₂ melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process. Supported by the National Natural Science Foundation of China (Grant No. 50331040) and the Innovation Funds from Shanghai Institute of Ceramics, Chinese Academy of Sciences (Grant No. SCX0623)