A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Synthesis, structures, and magnetic properties of carboxylate-bridged trinuclear complexes based on low-spin manganese(III)/iron(III) building blocks

Four linear trinuclear transition metal complexes have been prepared and characterized. The complexes [M^II(MeOH)₄][Fe^III(L)₂]₂·2MeOH (M = Fe (1) or Ni (2)), [Co^II(EtOH)₂(H₂O)₂][Fe^III(L)₂]₂·2EtOH (3), and [Mn^II(phen)₂][Mn^III(L)₂]₂·4MeOH (4) (H₂L = ((2-carboxyphenyl)azo)-benzaldoxime, phen = 1,10-phenanthroline) possesses a similar syn–anti carboxylate-bridged structure. The terminal Fe(III) or Mn(III) ions are low spin, and the central M(II) ions are high spin. Magnetic measurements show that antiferromagnetic interactions were present between the adjacent metal ions via the syn–anti carboxylate bridges. The antiferromagnetic coupling between low-spin Fe(III) and Ni(II) is unusual, which has been tentatively assigned to the structural distortion of Fe(III).     

Highly transparent silica monoliths embedded with high concentration oxide nanoparticles

Silica monoliths embedded with high concentration of γ-Fe₂O₃ or TiO₂ nanoparticles were prepared by a sol–gel procedure designed according to the inherent properties of oxide colloids. In the first step, highly dispersible oxide nanoparticles were produced using an in situ modification sol–gel strategy. Then, these particles were re-dispersed in silicon alkoxide-containing solution to form a stable colloidal solution. The hydrolysis and condensation reactions of alkoxide were catalyzed by an organic base (morpholine). Due to the large molecule size of morpholine, the electric double layer on the surface of colloidal particles was not compressed by the ionized morpholine molecules. The colloidal solution thus remained stable during the gelation process. Through this procedure, oxide nanoparticles could be immobilized homogeneously in the pores of a silica matrix, forming highly transparent and crack-free monoliths.     

Dehydrogenation of Amine?Borane Me2NH⋅BH3 Catalyzed by a Lanthanum?Hydride Complex

The rare‐earth‐metal? hydride complexes [{(1,7‐Me₂TACD)LnH}₄] (Ln=La 1 a , Y 1 b ; (1,7‐Me₂TACD)H₂=1,7‐dimethyl‐1,4,7,10‐tetraazacyclododecane, 1,7‐Me₂[12]aneN₄) were synthesized by hydrogenolysis of [{(1,7‐Me₂TACD)Ln(η³‐C₃H₅)}₂] with 1 bar H₂. The tetrameric structures were confirmed by ¹H NMR spectroscopy and single‐crystal X‐ray diffraction of compound 1 a . Both complexes catalyze the dehydrogenation of secondary amine? borane Me₂NH ? BH₃ to afford the cyclic dimer (Me₂NBH₂)₂ and (Me₂N)₂BH under mild conditions. Whilst the complete conversion of Me₂NH ? BH₃ was observed within 2 h with lanthanum? hydride 1 a , the yttrium homologue 1 b required 48 h to reach 95 % conversion. Further reactions of compound 1 a with Me₂NH ? BH₃ in various stoichiometric ratios gave a series of intermediate products, [{(1,7‐Me₂TACD)LaH}₄](Me₂NBH₂)₂ ( 2 a ), [(1,7‐Me₂TACDH)La(Me₂NBH₃)₂] ( 3 a ), [(1,7‐Me₂TACD)(Me₂NBH₂)La(Me₂NBH₃)] ( 4 a ), and [(1,7‐Me₂TACD)(Me₂NBH₂)₂La(Me₂NBH₃)] ( 5 a ). Complexes 2 a , 3 a , and 5 a were isolated and characterized by multinuclear NMR spectroscopy and single‐crystal X‐ray diffraction studies. These intermediates revealed the activation and coordination modes of “Me₂NH ? BH₃” fragments that were trapped within the coordination sphere of a rare‐earth‐metal center.     

Graphene Oxide Protected Nucleic Acid Probes for Bioanalysis and Biomedicine

Recently, the binding ability of DNA on GO and resulting nuclease resistance have attracted increasing attention, leading to new applications both in vivo and in vitro. In vivo, nucleic acids absorbed on GO can be effectively protected from enzymatic degradation and biological interference in complicated samples, making it useful for targeted delivery, gene regulation, intracellular detection and imaging with high uptake efficiencies, high intracellular stability, and very low toxicity. In vitro, the adsorption of ssDNA on GO surface and desorption of dsDNA or well‐folded ssDNA from GO surface result in the protection and deprotection of DNA from nucleic digestion, respectively, which has led to target‐triggered cyclic enzymatic amplification methods (CEAM) for amplified detection of analytes with sensitivity 2–3 orders of magnitude higher than that of 1:1 binding strategies. This Concept article explores some of the latest developments in this field.     

Formation and Properties of Self‐Assembly‐Driven Fluorescent Nanoparticle Sensors

Fluorescent nanoparticles (FNPs) are obtained in water by self‐assembly from a polymeric ionic liquid, fluorescent carboxylate moiety, and a surfactant through two main supramolecular interactions, that is, ionic bonds and hydrophobic/hydrophilic interactions. The hydrophobicity of the surfactant is tunable and a highly hydrophobic surfactant increases the fluorescence intensity and stability of the FNPs. The fluorescence of the FNPs is sensitive to a quenching effect by various ions with high selectivity, and consequently, they may be used as sensors. The self‐assembly approach used to generate the FNPs is considerably simpler than other methods based on more challenging synthetic methods and the flexibility of the approach should allow a wide and diverse range of FNPs to be prepared with specific sensor applications.     

Structural and Dynamic Basis of Human Cytochrome P450 7B1: A Survey of Substrate Selectivity and Major Active Site Access Channels

Cytochrome P450 (CYP) 7B1 is a steroid cytochrome P450 7α‐hydroxylase that has been linked directly with bile salt synthesis and hereditary spastic paraplegia type 5 (SPG5). The enzyme provides the primary metabolic route for neurosteroids dehydroepiandrosterone (DHEA), cholesterol derivatives 25‐hydroxycholesterol (25‐HOChol), and other steroids such as 5α‐androstane‐3β,17β‐diol (anediol), and 5α‐androstene‐3β,17β‐diol (enediol). A series of investigations including homology modeling, molecular dynamics (MD), and automatic docking, combined with the results of previous experimental site‐directed mutagenesis studies and access channels analysis, have identified the structural features relevant to the substrate selectivity of CYP7B1. The results clearly identify the dominant access channels and critical residues responsible for ligand binding. Both binding free energy analysis and total interaction energy analysis are consistent with the experimental conclusion that 25‐HOChol is the best substrate. According to 20 ns MD simulations, the Phe cluster residues that lie above the active site, particularly Phe489, are proposed to merge the active site with the adjacent channel to the surface and accommodate substrate binding in a reasonable orientation. The investigation of CYP7B1–substrate binding modes provides detailed insights into the poorly understood structural features of human CYP7B1 at the atomic level, and will be valuable information for drug development and protein engineering.     

Renormalization and conjugacy of piecewise linear Lorenz maps

We investigate the uniform piecewise linearizing question for a family of Lorenz maps. Let f be a piecewise linear Lorenz map with different slopes and positive topological entropy, we show that f is conjugate to a linear mod one transformation and the conjugacy admits a dichotomy: it is either bi-Lipschitz or singular depending on whether f is renormalizable or not. f is renormalizable if and only if its rotation interval degenerates to be a rational point. Furthermore, if the endpoints are periodic points with the same rotation number, then the conjugacy is quasisymmetric.     

Numerical discretization-based kernel type estimation methods for ordinary differential equation models

We consider the problem of parameter estimation in both linear and nonlinear ordinary differential equation(ODE) models. Nonlinear ODE models are widely used in applications. But their analytic solutions are usually not available. Thus regular methods usually depend on repetitive use of numerical solutions which bring huge computational cost. We proposed a new two-stage approach which includes a smoothing method(kernel smoothing or local polynomial fitting) in the first stage, and a numerical discretization method(Eulers discretization method, the trapezoidal discretization method,or the Runge–Kutta discretization method) in the second stage. Through numerical simulations, we find the proposed method gains a proper balance between estimation accuracy and computational cost.Asymptotic properties are also presented, which show the consistency and asymptotic normality of estimators under some mild conditions. The proposed method is compared to existing methods in term of accuracy and computational cost. The simulation results show that the estimators with local linear smoothing in the first stage and trapezoidal discretization in the second stage have the lowest average relative errors. We apply the proposed method to HIV dynamics data to illustrate the practicability of the estimator.     

Substituent effects on the redox potentials of dihydroxybenzenes: theoretical and experimental study

The redox reactions of p-hydroquinone and pyrocatechol undergo a two-proton-two-electron process in aqueous solution. We calculated their redox potentials at the B3LYP/6-311+G(d,p) level, and verified the values by employing cyclic voltammetry experiments. Then we selected seven substituent groups (–F, –Cl, –OH, –COOH, –CN, –NH₂, and –NO₂ groups) to systematically investigate the substituent effect, including the sort, position, and number of the substituent, on the redox potentials of p-hydroquinone and pyrocatechol. The calculated results show that –NH₂ and –OH groups can decrease the redox potentials, while –F, –Cl, –COOH, –CN, and –NO₂ groups increase the potential values of p-hydroquinone and pyrocatechol. The calculations can accurately predict the substituent effects on the redox potentials of pyrocatechol and p-hydroquinone. We would expect that the accurate calculation results for the model systems could be applied in the prediction of electrode potentials of other molecules.