氮胁迫下水稻的激光诱导荧光光谱特性

为了指导水稻的田间施肥,解决因过量施肥造成资源的大量浪费以及环境污染,特别是水体富营养化等问题,搭建了基于紫外激光诱导荧光技术的荧光光谱探测系统,以研究水稻叶片的氮水平与荧光强度的相关性。文中先用植物营养测定仪(TYS-3N)测定水稻叶片氮含量和叶绿素含量（样本为水稻分蘖期的倒二叶,采集于中国江汉平原地区）,再用搭建的测量系统采集了不同氮水平的荧光光谱。获得了不同氮水平下水稻叶片的荧光光谱数据库,分析了荧光光谱参数F₇₄₀/F₆₈₅（为峰值740,685 nm处的荧光强度比）与氮水平的相关性,发现氮含量的变化对水稻叶片荧光光谱特性影响明显。通过该实验验证了荧光参数的峰值比F₇₄₀/F₆₈₅与氮含量呈明显的线性正相关,相关系数（r）为0.871 8,均方根误差（RMSE）为0.076 82。实验表明采用激光诱导荧光光谱探测技术具有快速无损等优点,且有一定潜力用于定量测量植被营养元素的含量,为采用荧光技术对农作物施氮管理提供了支持。     

拉曼除谱原位测量水溶液中蛋白质的酰胺A谱带

蛋白质的酰胺A谱带对蛋白质的酰胺氢键结构很敏感. 然而由于该谱带和水的OH伸缩振动谱带严重重叠,导致在蛋白质水溶液中原位测量酰胺A谱带依旧很困难. 我们提出了一种新的分析方法用于原位测量水溶液中的酰胺A谱带. 这个方法称为拉曼除谱法. 将蛋白质水溶液光谱除以纯水光谱即可获得拉曼除谱. 利用数值模拟从数学上肯定了使用拉曼除谱可以直接获得酰胺A谱带. 我们还通过测量溶菌酶和α-糜蛋白酶的固体和水溶液的拉曼光谱,这些光谱也证实了可以通过拉曼除谱法直接获取酰胺A谱带. 利用拉曼除谱还分析了溶菌酶的热变性过程. 这些研究表明拉曼除谱可以原位地表征水溶液中的蛋白质酰胺A谱带.     

Calibration of a compact XUV soft X‐ray monochromator with a digital autocollimator in situ

A digital autocollimator of resolution 0.1 µrad (0.02 arcsec) serves as a handy correction tool for calibrating the angular uncertainty during angular and lateral movements of gratings inside a monochromator chamber under ultra‐high vacuum. The photon energy dispersed from the extreme ultraviolet (XUV) to the soft X‐ray region of the synchrotron beamline at the Taiwan Light Source was monitored using molecular ionization spectra at high resolution as energy references that correlate with the fine angular steps during grating rotation. The angular resolution of the scanning mechanism was <0.3 µrad, which results in an energy shift of 80 meV at 867 eV. The angular uncertainties caused by the lateral movement during a grating exchange were decreased from 2.2 µrad to 0.1 µrad after correction. The proposed method provides a simple solution for on‐site beamline diagnostics of highly precise multi‐axis optical manipulating instruments at synchrotron facilities and in‐house laboratories.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.     

Enhanced electrochemical properties and thermal stability of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by surface modification with Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>

Layered LiNi_1/3Co_1/3Mn_1/3O₂ cathode material is synthesized via a sol-gel method and subsequently surface-modified with Eu₂O₃ layer by a wet chemical process. The effect of Eu₂O₃ coating on the electrochemical performances and thermal stability of LiNi_1/3Co_1/3Mn_1/3O₂@Eu₂O₃ cells is investigated systematically by the charge/discharge testing, cyclic voltammograms, AC impedance spectroscopy, and DSC measurements, respectively. In comparison, the Eu₂O₃-coated sample demonstrates better electrochemical performances and thermal stability than that of the pristine one. After 100 cycles at 1C, the Eu₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode demonstrates stable cyclability with capacity retention of 92.9 %, which is higher than that (75.5 %) of the pristine one in voltage range 3.0–4.6 V. Analysis from the electrochemical measurements reveals that the remarkably improved performances of the surface-modified composites are mainly ascribed to the presence of Eu₂O₃-coating layer, which could efficiently suppress the undesirable side reaction and increasing impedance, and enhance the structural stability of active material.     

利用Landsat热红外数据研究1985年—2015年北京市冬季热场分布

由于北京城市中心区冬季供暖、汽车尾气、工业生产等因素的影响,以及冬季植被覆盖减少导致地表热惯量降低,致使北京市冬季地表热场与其他季节差异明显。冬季城市热场分布直接影响冬季大气颗粒物等污染物的扩散速度,因此,研究热场分布对了解城市热场在大气颗粒物污染中的贡献具有重要的意义。首先利用MODTRAN大气辐射传输模型计算大气透过率、大气上行辐射与大气下行辐射三个关键参数,通过构建查找表解算热红外波段辐射传输方程。使用数据模拟的手段评价了该方法的精度,结果表明,当比辐射率和水汽分别在±0.005和±0.6的误差范围内波动时,温度反演的误差分别小于0.348和2.117 K,表明该方法可达到较高的反演精度。选择长时间序列Landsat TM、ETM+数据,进行地表温度反演,得到1985年—2015年北京市的地表温度。基于反演的地表温度分析了北京市热场的时空分布。结果表明,北京冬季热场分布在空间上可分为四个层次：北京市二环内温度较高、二环到五环内低温环状特征明显、外围郊区温度高以及北京西部的山区温度最低;随着近30年来北京市的快速发展,热场分布在长时间序列中发生了明显的改变：随着北京城市的不断扩张,环状低温区域也不断扩大,从三环扩展到六环;城市二环以内热岛效应随时间推移而增强,且分布范围扩大。     

Swelling Properties and Environmental Responsiveness of Superabsorbent Composite Based on Starch-G-Poly Acrylic Acid/Organo-Zeolite

Star-g-poly (acrylic acid)/organo-zeolite 4A (S-g-PAA/OZ) superabsorbent composite was prepared by grafting partially neutralized acrylic acid onto starch in the presence of organo-zeolite 4A (OZ) as an inorganic component. The morphology was characterized with scanning electron microscopy (SEM). Energy dispersive spectrometer (EDS) analysis revealed the fine distribution of OZ in superabsorbent composite. The swelling kinetics of the composites were characterized by means of a Schott's second-order model. The effect of OZ concentration in the composite on the water absorbency and swelling behavior were tested. The swelling properties of the composites were evaluated in various environments; pH, salinity, temperature, urea solution, and solvent-water mixtures. The activation energy (ΔE) for water during the swelling process was also determined through Arrhenius plots. The results showed that the proper amount of OZ was beneficial for improvement of the water absorbent capacity and the initial swelling rate in distilled water. The optimum prepared composite with 10 wt % OZ, possessed the maximum water absorption (511g/g) in distilled water and (521 g/g) in 0.1 wt % urea solution. The results inferred that S-g-PAA/OZ superabsorbent composite can be exploited for agriculture and medical applications.     

基于虚拟源时间反转的经颅超声精确聚焦*

针对经颅超声难以精确聚焦的问题,本文研究了基于虚拟源的时间反转方法,建立颅骨二维数字模型,在聚焦目标处设置虚拟声源,利用时域有限差分法模拟超声时间反转过程,并考察基于虚拟源时间反转方法的聚焦效果。数值仿真结果表明,基于虚拟源的时间反转方法可以实现经颅超声的精确聚焦,聚焦强度和精度好于传统的相控聚焦;换能器中心频率和数量对聚焦效果的影响规律与相控聚焦时类似;该方法可以同时向多个焦点聚焦,并自适应调节各焦点处声压幅度。