Measurement of 129Xe frequency shift due to Cs–129Xe collisions

Enhancement factor K0, which characterizes NMR and EPR frequency shifts for Cs-129Xe, is measured for the first time. The enhancement factor r-o was measured to be （702±41） at 80 ℃ and （653±20） at 90 ℃, using the NMR frequency shift, detected by atomic magnetometer at a low magnetic field of 100 nT. This result is useful for predicting the EPR frequency shifts for Cs and the NMR frequency shifts for 129Xe in spin-exchange cells.     

热线法测定气体导热系数实验的探讨与改进

在准静态低气压下测量气体的热传导系数时，理论上在低压强范围内应得到Q^-1低-p^-1线性关系图象，但实验数据所绘出的图象出现明显的非线性．本文着重分析出现非线性的原因，并提出实验改进的方法。     

层状双金属氢氧化物及其复合材料加速电解水制氢的研究进展

随着经济社会的不断发展和能源的不断消耗,开发清洁能源已引起研究者们的广泛关注。层状双金属氢氧化物(LDH)具有典型的层状结构、制备难度低、组成易调节等优点,在电催化分解水方面表现出可与贵金属催化剂相媲美的性能。目前LDH催化剂仍然存在稳定性不足、活性位点辨别不明、电催化反应机理模糊不清等科学问题亟待解决。本文首先介绍了LDH材料的性质和制备方法,重点从元素和化合物对LDH材料结构和性能的调控、取代阳极OER以及海水氧化三个方面综述了LDH材料在电催化制氢方面的研究进展,阐述了LDH复合材料的形貌、界面作用及化合物之间的协同作用。最后对LDH材料更深层次的研究方向作出展望。     

High Performance Nonvolatile Transistor Memories Utilizing Functional Polyimide‐Based Supramolecular Electrets

We report pentacene‐based organic field‐effect transistor memory devices utilizing supramolecular electrets, consisting of a polyimide, PI(6FOH‐ODPA), containing hydroxyl groups for hydrogen bonding with amine functionalized aromatic rings (AM) of 1‐aniline (AM1), 2‐naphthylamine (AM2), 2‐aminoanthracene (AM3), and 1‐aminopyrene (AM4). The effect of the phenyl ring size and composition of AM1–AM4 on the hole‐trapping capability of the fabricated devices was investigated systematically. Under an operating voltage under ±40 V, the prepared devices using the electrets of 100 % AM1–AM4/PI ratios exhibited a memory window of 0, 8.59, 25.97, and 29.95 V, respectively, suggesting that the hole‐trapping capability increased with enhancing phenyl ring size. The memory window was enhanced as the amount of AM in PI increased. Furthermore, the devices showed a long charge‐retention time of 10⁴ s with an ON/OFF current ratio of around 10³–10⁴ and multiple switching stability over 100 cycles. This study demonstrated that the electrical characteristics of the OFET memory devices could be manipulated through the chemical compositions of the supramolecular electrets.     

通过类比Rice-Ramsperger-Kassel-Marcus理论再议Marcus的电子转移速率：关于线性和非线性溶剂化情形的统一形式

R. A. Marcus在他开拓性的工作中,考察了溶剂化效应对电子转移过程的影响,并给出了著名的非绝热电子转移速率公式. 本文基于热力学溶剂化势能面的分析,从Rice-Ramsperger-Kassel-Marcus理论的角度重新考察了Marcus的公式. 由类比Rice-Ramsperger-Kassel-Marcus得到的理论,不仅可以适用于线性溶剂化的情形并得到Marcus的速率公式,也同样可以用于非线性溶剂化的情形. 在非线性溶剂化的情形下,会存在溶剂化势能面的多点交叉. 本文平行地考察了Fermi黄金规则给出的相应结果,并对比本工作中所提出的Rice-Ramsperger-Kassel-Marcus类似理论进行了批判性的讨论. 作为例释,考察了二次型溶剂化的情形. 对于这种情形,物理上存在良好的描述方案.     

Synthesis, Crystal Structure and Magnetic Behaviour of {[Yb(1,4-BDC)1.5(H2O)4]·H2O}n (1,4-BDC?=?1,4-benzenedicarboxylate)

Abstract  

The title complex {[Yb(1,4-BDC)_1.5(H₂O)₄]·H₂O}_n (1) (1,4-BDC = 1,4-benzenedicarboxylate) has been hydrothermally synthesized and structurally characterized by the single crystal X-ray diffraction. Crystals of compound 1 belongs to the triclinic crystal system, space group P-1; a = 7.549(3) ?, b = 10.072(4) ?, c = 10.470(4) ?, α = 87.810(4)°, β = 82.531(4)°, γ = 86.306(4)°, V = 787.3(5) ?³, Z = 2. The Yb(III) atoms are linked by the deprotonated 1,4-BDC ligands in two kinds of bridging modes. Four Yb(III) atoms at each corner (nodes) and four 1,4-BDC ligands at each edge (spacers) form a edge–sharing 36-membered rings. The rhombohedral Yb₄(1,4-BDC)₄ arranged in an alternating fashion to construct a 1D ladder-like chain along the c axis. Two neighboring chains are linked to each other in a parallel fashion to construct 3D supramolecular structure by O–H···O hydrogen bonds and π–π stacking interactions. In addition, the properties of thermogravimetric analysis and magnetic behaviors of the complex have been also discussed.     

Charge delocalization in a cyclometalated bisruthenium complex bridged by a noninnocent 1,2,4,5-tetra(2-pyridyl)benzene ligand

Two ruthenium atoms are covalently connected to the para positions of a phenyl ring in 1,2,4,5-tetra(2-pyridyl)benzene (tpb) to form a linear Ru-tpb-Ru arrangement. This unique structure leads to appealing electronic properties for the biscyclometalated complex [(tpy)Ru(tpb)Ru(tpy)](2+), where tpy is 2,2';6',2″-terpyridine. It could be stepwise oxidized at substantially low potential (+0.12 and +0.55 V vs Ag/AgCl) and with a noticeably large comproportionation constant (1.94 × 10(7)). In addition to the routinely observed metal-to-ligand charge-transfer transitions, [(tpy)Ru(tpb)Ru(tpy)](2+) displays a separate and distinct absorption band at 805 nm with appreciable absorptivity (ε = 9000 M(-1) cm(-1)). This band is assigned to the charge transition from the Ru-tpb-Ru motif to the pyridine rings of tpb with the aide of density functional theory (DFT) and time-dependent DFT calculations. Complex [(tpy)Ru(tpb)Ru(tpy)](2+) was precisely titrated with 1 equiv of cerium ammonium nitrate to produce [(tpy)Ru(tpb)Ru(tpy)](3+), which shows intense multiple NIR transitions. The electronic coupling parameters H(ab) of individual NIR components are determined to be 5812, 4942, 4358, and 3560 cm(-1). DFT and TDDFT calculation were performed on [(tpy)Ru(tpb)Ru(tpy)](3+) to elucidate its electronic structure and spin density population and the nature of the observed NIR transitions. Electron paramagnetic resonance studies of [(tpy)Ru(tpb)Ru(tpy)](3+) exhibit a discernible rhombic signal with the isotropic g factor of ?g? = 2.144. These results point to the strong orbital interaction of tpb with metal centers and that tpb behaves as a redox noninnocent bridging ligand in [(tpy)Ru(tpb)Ru(tpy)](2+). Complex [(tpy)Ru(tpb)Ru(tpy)](3+) is determined to be a Robin-Day class III system with full charge delocalization across the Ru-tpb-Ru motif.     

Porous composite scaffolds of hydroxyapatite/silk fibroin via two‐step method

A two‐step method was used to fabricate the hydroxyapatite (HAP)/silk fibroin (SF) scaffolds, i.e. the nano‐sized HAP/SF composite powders were prepared by co‐precipitation, which were then blended with SF solution to fabricate the HAP/SF composite scaffolds. The obtained scaffolds showed a 3D porous structure. The porosity was higher than 90% with the average macropore size of 214.2 µm. Moreover, the nano‐sized HAP/SF composite powders were uniformly dispersed in the silk fibroin matrix, which provided the scaffolds enhanced compressive properties. The cell culture assay showed that the scaffolds fabricated by the two‐step method could improve the cell proliferation and osteogenic differentiation when compared with those prepared by the conventional one‐step blending method. The results suggested that the two‐step method could promote the uniform dispersion of HAP in the SF matrix and efficient combination between the HAP and the matrix, which may provide a potential application in the composite scaffold preparation for tissue engineering. Copyright © 2009 John Wiley & Sons, Ltd.     

An automated capillary electrophoresis system for high-speed separation of DNA fragments based on a short capillary

A high-speed DNA fragment separation system was developed based on a short capillary and a slotted-vial array automated sample introduction system. The injection process of DNA sample in a short capillary was investigated systematically with three injection techniques including constant-field-strength, low-field-strength and translational spontaneous injections. Under the optimized conditions, picoliter-scale sample plugs (corresponding to ca. 20-μm plug length) were obtained, which ensure the high-speed and high-efficiency separation for DNA fragments with a short effective separation length. Other separation conditions including the sieving matrix concentration, separation field strength and effective separation length were also optimized. The present system was applied in the separation of ΦX174-Hae III digest DNA marker. With an effective separation length of 2.5 cm, the separation could be achieved in <100 s with plate heights ranging from 0.21 to 0.74 μm (corresponding to plate numbers from 4.86 × 10(6) to 1.36 × 10(6)/m). The repeatabilities for the migration time of the eleven fragments were between 0.4 and 1.1% RSD (n=8). By using the automated continuous injection method, the separation for four different DNA samples could be achieved within 250 s. The present system was further applied in the fast sizing of real DNA samples of PCR products.