Electrochemical Immunoassay for Carbohydrate Antigen‐125 Based on Polythionine and Gold Hollow Microspheres Modified Glassy Carbon Electrodes

A new electrochemical immunosensor for the detection of carbohydrate antigen‐125 (CA125), a carcinoma antigen, was developed by immobilization CA125 antibody (anti‐CA125) on gold hollow microspheres and porous polythionine (PTH) modified glassy carbon electrodes (GCE). The gold hollow microspheres provided a biocompatible microenvironment for proteins, and greatly amplified the coverage of anti‐CA125 molecules on the electrode surface. The performance and factors influencing the immunosensor were investigated in detail. The detection is based on the current change before and after the antigen‐antibody interaction. Under optimal conditions, the amperometric changes were proportional to CA125 concentration ranging from 4.5 to 36.5 U/mL with a detection limit of 1.3 U/mL (at 3σ). The CA125 immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy and reproducibility. The as‐prepared immunosensors were used to analyze CA125 in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis.     

Controlled synthesis and magnetic properties of 2D and 3D iron azide networks infinity2[Fe(N3)2(4,4'-bpy)] and infinity3[Fe(N3)2(4,4'-bpy)

Controlled synthesis of transition metal complexes with mixed ligands has led to two new compounds with the same empirical formula [Fe(N3)2(4,4'-bpy)] (4,4'-bpy=4,4'- bipyridine). The compound 2D-[Fe(N3)2(4,4'-bpy)] (I) contains end-on (EO) bridging azido ligands. It crystallizes in the orthorhombic crystal system, space group Cmmm (No. 65): a=11.444(2) A, b=15.181(3) A, c=3.458(1) A, V=600.8(2) A(3), and Z=2. The compound 3D-[Fe(N3)2(4,4'-bpy)] (II) contains end-to-end (EE) azido bridges. It belongs to the tetragonal crystal system, space group P4(1)2(1)2 (No. 92): a=8.132(1) A, b=8.132(1) A, c=16.708(3) A, V=1104.9(5) A(3), and Z=4. Crystals of I and II have been grown by the diffusion method. Phase-pure samples of both compounds have been obtained by means of an optimal solution synthesis. Spontaneous long-range magnetic ordering was found in both I and II, with I being a metamagnet, and II being a ferromagnet. For I, in the low-field region, multiple transitions at TN1=20 K and TN2=5 K were observed, and these indicated the existence of Fe moment reorientation. Heat capacity measurements on II confirmed ferromagnetic transition at TC=20 K.     

X-H (X = C, N, O, Si, P, S) 键离解能计算的密度泛函方法研究

使用了不同密度泛函方法计算X-H (X = C, N, O, Si, P, S) 键离解能，并分析不同密度泛函方法的计算精度。研究发现大多数密度泛函方法包括B3LYP, B3P86, B3PW91, G96LYP, PBE1PBE，和BH&HLYP都明显低估键离解能13-25 kJ/mol。该现象与是否使用无限基组无关，因为即使使用无限基组键离解能仍然被低估。因此密度泛函方法不适合用于键离解能的估算。其中B3P86方法的偏差最小。进一步分析表明，使用限制性开壳层计算并无任何优势，在大多数情况下非限制性开壳层计算实际上比限制性开壳层计算要好。最后，我们发现了密度泛函方法对键离解能的低估是系统的，因此建议利用校准后的UDFT/6-311++G(d, p)方法计算化学键离解能。     

Syntheses and characterizations of poly[2‐(dimethylamino)ethyl methacrylate]–poly(propylene oxide)–poly[2‐(dimethylamino)ethyl methacrylate] ABA triblock copolymers

A novel, near‐monodisperse, well‐defined ABA triblock copolymer, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(propylene oxide)‐b‐poly[2‐(dimethylamino)ethyl methacrylate], was synthesized via oxyanion‐initiated polymerization. The initiator was a telechelic‐type potassium alcoholate prepared from poly(propylene glycol) and KH in dry tetrahydrofuran. The copolymers produced were characterized by Fourier transform infrared, ¹H NMR, and gel permeation chromatography (GPC). GPC and ¹H NMR analyses showed that the products obtained were the desired copolymers, with narrow molecular weight distributions (ca. 1.09–1.11) very close to that of the original poly(propylene glycol). ¹H NMR, surface tension measurements, and dynamic light scattering all indicated that the triblock copolymer led to interesting aqueous solution behaviors, including temperature‐induced micellization and very high surface activity. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 624–631, 2002; DOI 10.1002/pola.10144     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

Influence of drying procedure on the mesoporosity and surface fractal dimensions of silica xerogels prepared with different agitation methods

Silica xerogels were prepared by thermal drying wet gels in an electric oven (70 degrees C) after certain duration of ambient drying, and the relevant effect is investigated on the mesopore structures and surface fractal dimensions of the resultant xerogels. The silica gels were derived from a hydrochloric acid-catalyzed TEOS (tetraethylorthaosilicate) system, and both magnetic stirring and ultrasonic vibration were adopted during sol preparation. The percentage mesoporosity and surface fractal dimensions are evaluated using image analysis methods, based on FE-SEM (field emission gun-scanning electron microscopy) images. The results show that the mesoporosity of the resultant xerogels decreases with the duration of ambient drying for samples prepared using magnetic stirring and low-intensity ultrasonic vibration, while samples subjected to high-intensity ultrasound show a somewhat reverse trend. Samples prepared with magnetic stirring have almost constant surface fractal dimensions (nearly 3), irrespective of the ambient drying before thermal drying. The surface fractal dimensions of samples prepared using ultrasound increase with the duration of ambient drying.     

N—乙基—N—苄基苯胺合成方法的改进

以苯胺和乙醇为原料，采用ＲａｎｅｙＮｉ为催化剂，合成了Ｎ－乙基苯胺，再在相转移催化剂作用下，经苄基化反应得到标题化合物，第一步合成方法的收率比通常方法的收率提高约３０％。     

[SiMo_2~(Ⅴ)Mo_(10)~(Ⅵ)O_(40)]~(6-)及其钒取代物的量子化学研究

采用SCC－DV－Xα方法对α－Keggin结构硅钼二电子还原态杂多蓝阴离子［SiMo2（V）Mo10（VI）O40］6-和它的混合型钒取代物［SiV2（V）Mo10（VI）O40］6-进行了量子化学计算，获得了轨道能级、费米能级、各原子价电子布居、自由价态密度分析和分子轨道成分等信息．理论分析表明该杂多阴离子中所有原子Si、Mo、V、Oa、Ob、Oc和Od都参与反应，Oc和Od的成键能力较强，化学活性较大，有力地支持了实验结果．中心硅氧四面体结构发生畸变很小，但构成三金属簇的八面体结构都发生了较明显的畸变，其整体仍然保持α－Keggin结构．钒的取代增强了Mo2VO13三金属族中Od的活性．预测这两种杂多阴离子都有被继续还原和取代的趋势，[SiMo2(V)Mo10(VI)O40]6-的趋势更强．     

First principles study of the structure,electronic state,and stability of CmN2 clusters

Geometric and electronic properties of C_mN₂ (m = 1–14) clusters have been investigated by density functional theory using the hybrid B3LYP functional and the 6‐311G(d) basis set. Harmonic frequencies for these clusters are given to aid in the characterization of the ground states. These results show that C_mN₂ (m = 1–14) clusters form linear structures with D_∞h symmetry. Two N atoms favor to bond at ends in linear isomers. The chains with odd m have triplet ground states whereas the ones with even m have singlet ground states. The calculated HOMO–LUMO gaps and ionization potentials all show that the C_mN₂ (m = 1–14) clusters with even m are more stable than those with odd m, which is consistent with the observed even–odd alternation of the time‐of‐flight signal intensities. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

High-resolution DNA separation in microcapillary electrophoresis chips utilizing double-L injection techniques

An experimental and numerical investigation into the use of high-resolution injection techniques to separate DNA fragments within electrophoresis microchips is presented. The principal material transport mechanisms of electrokinetic migration, fluid flow, and diffusion are considered, and several variable-volume injection methods are discussed. A detailed analysis is provided of a double-L injection technique, which employs appropriate electrokinetic manipulations to reduce sample leakage within the microchip. The leakage effect in electroosmotic flow (EOF) is investigated using a sample composed of rhodamine B and Cy3 dye. Meanwhile, the effects of sample leakage in capillary electrophoresis (CE) separation are studied by considering the separation of 100-base pairs (bp) DNA ladders and HaeIII-digested PhiX-174 DNA samples. The present experimental and simulation results indicate that the unique injection system employed in the current microfluidic chip has the ability to replicate the functions of both the conventional cross-channel and the shift-channel injection systems. Furthermore, applying the double-L injection method to these two injection systems is shown to reduce sample leakage significantly. The proposed microfluidic chip and double-L injection technique developed in this study have an exciting potential for use in high-resolution, high-throughput biochemical analysis applications and in many other applications throughout the micrototal analysis systems field.