非晶硅碳薄膜发光二极管发光的热致猝灭

本文详细测试了用RF-PECVD法制备的非晶硅碳薄膜发光二极管的光强电流特性和温度对器件发光强度的影响.在直流电流驱动下,器件的发光在注入电流1A/cm2左右趋于饱和,而在低占空比的脉冲电流驱动下器件的发光直至注入电流20A/cm2仍随电流近似线性增长,但提高环境温度发光随之下降.结合对器件受热情况分析表明,热致猝灭而非场致猝灭导致了器件在大电流下的发光饱和,并简要提出了改进器件散热的措施.     

Reflex optical sensor based on dual metal gratings with high angular sensitivity

An interesting reflection phenomenon in a dual metal grating (DMG) structure is studied, which is related to the competition between Fabry-Prot (F-P) resonance effect and evanescent-field coupling effect inside the gap between the two composing single metal gratings. This competition leads to high angular sensitivity in response to the refractive index variation of the sample solution in the gap. A reflex optical sensor with high sensitivity based on DMG for detecting the change in refractive index is proposed and its performance theoretically is discussed.     

激光诱导熔石英表面损伤修复中的气泡形成和控制研究

基于熔石英材料在CO_2激光作用下的温度分布和结构参数变化的计算结果,对熔石英损伤修复中的气泡形成和控制进行了研究.针对损伤尺寸介于150—250μm之间的损伤点,提出了一种能够有效控制气泡形成的长时间低温预热修复方法.基于低温下熔石英材料结构弛豫时间常数较长的特点,该方法在不引起熔石英材料结构发生显著变化的同时,能够解吸附表面和裂纹处所附着的气体和杂质,可有效降低裂纹闭合过程中气泡形成的概率.实验结果表明,长时间低温预热修复方法的成功修复概率可达到98%.     

Spin-dependent Andreev reflection in a three-terminal Aharonov-Bohm interferometer with coherent indirect coupling

Within the framework of non-equilibrium Green’s functions, we investigate the spin-dependent Andreev reflection (AR) in a three-terminal Aharonov-Bohm interferometer with double quantum dot, taking account of the coherent indirect coupling via the superconducting reservoir. It is found that the time-reversal symmetry is broken by the crossed Andreev reflection (CAR) process, and moreover that the spin-value effect of the linear conductance, the spin-polarised AR current, and a pure spin current can be generated by means of the normal AR and the CAR. Expressions for the AR conductances (the transport coefficients) governing the AR properties of this system are derived analytically. The effect of the coherent indirect coupling on the conductance, the Andreev reflected tunneling magnetoresistance (ARTMR), and the spin-related current in the presence of the AR are amply analyzed. Our results indicate that the optimal properties of this system can be realised by tuning the external parameters.     

紫外光激发下氧化锌纳米线的发光特性研究

室温条件下,用355 nm的激光激发氧化锌纳米线,测量了其发光光谱.观察到半宽度较小、峰值波长约382 nm的紫光峰和半宽度较宽、峰值波长约507 nm的绿光峰;两峰的发光强度随激发光功率密度的变化而变化,且均存在饱和效应,但各自的变化规律及饱和值的大小不同;紫光峰的中心波长随激发光功率密度的增加而发生了明显的红移.对两峰产生的机理、强度饱和值存在的原由、强度随激发光功率密度变化及紫光峰红移的起因进行了分析.     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

A new solution of reducing polymer optical fiber losses

Polymethyl methacrylate (PMMA) is one of the most commonly used optical materials. However, the application of it in the area of optical communication is strongly limited by the intrinsic absorption loss of carbon-hydrogen stretching vibration. In this paper, we present a method to solve the problem by adopting the hollow-core fibers with cobweb cladding structure. The fibers use a single dielectric material and may solve the problem of structural support. Thus the feasibility of the “OmniGuide” fibers is improved, while a series of advantages of the “OmniGuide” hollow-core fiber are retained. It is promising that a fiber with low transmission loss, high bandwidth, large-core, and low costs can be designed and fabricated using PMMA. At the same time, a very broad range of the wavelengths (from visible to near infrared region, for instance, wavelengths at 0.65-1.12 μm, and even 1.30 μm, 1.54 μm and their neighbors) may be adopted for signal wavelength.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

The effects of Si3N4 interlayer on the thermal stability and hardness of Ti/TiNx (x = 0.5-1) nanolayered coatings

The polycrystalline Ti/TiN_x multilayer films were deposited by magnetron sputtering, and the as-deposited multilayer coatings were annealed at 500-800 °C for 2-4 h in vacuum. We investigated the effects of annealing temperature and annealing time on the microstructural, interfacial, and mechanical properties of the polycrystalline Ti/TiN_x multilayer films. It was found that the hardness increased with annealing temperature. This hardness enhancement was probably caused by the preferred crystalline orientation TiN(1 1 1). The X-ray reflectivity measurements showed that the layer structure of the coatings could be maintained after annealing at 500 °C and the addition of the Si₃N₄ interlayer to Ti/TiN_x multilayer could improve the thermal stability to 800 °C.     

Searching for high-K isomers in the proton-rich A～80 mass region

Configuration-constrained potential-energy-surface calculations have been performed to investigate the K isomerism in the proton-rich A～ 80 mass region. An abundance of high-K states are predicted. These high-K states arise from two and four-quasi-particle excitations, with K~π= 8~+ and K~π= 16~+, respectively. Their excitation energies are comparatively low, making them good candidates for long-lived isomers. Since most nuclei under study are prolate spheroids in their ground states, the oblate shapes of the predicted high-K states may indicate a combination of K isomerism and shape isomerism.