Comparison of high- and low-resolution electrospray ionization mass spectrometry for the analysis of naphthenic acid mixtures in oil sands process water

The oil sands regions of Northern Alberta, Canada, contain an estimated 1.7 trillion barrels of oil in the form of bitumen, representing the second largest deposit of crude oil in the world. A rapidly expanding industry extracts surface-mined bitumen using alkaline hot water, resulting in large volumes of oil sands process water (OSPW) that must be contained on site due to toxicity. The toxicity has largely been attributed to naphthenic acids (NAs), a complex mixture of naturally occurring aliphatic and (poly-)alicyclic carboxylic acids. Research has increasingly focused on the environmental fate and remediation of OSPW NAs, but an understanding of these processes necessitates an analytical method that can accurately characterize and quantify NA mixtures. Here we report results of an interlaboratory comparison for the analysis of pure commercial NAs and environmental OSPW NAs using direct injection electrospray ionization mass spectrometry (ESI-MS) and high-pressure liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS). Both methods provided very similar characterization of pure commercial NA mixture; however, the m/z selectivity of HPLC/HRMS was essential to prevent substantial false-positive detections and misclassifications in OSPW NA mixtures. For a range of concentrations encompassing those found in OSPW (10-100 mg/L), both methods produced linear response, although concentrations of commercial NAs above 50 mg/L resulted in slight non-linearity by HPLC/HRMS. A three-fold lower response factor for total OSPW NAs by HPLC/HRMS was largely attributable to other organic compounds in the OSPW, including hydroxylated NAs, which may explain the substantial misclassification by ESI-MS. For the quantitative analysis of unknown OSPW samples, both methods yielded total NA concentrations that correlated with results from Fourier transform infrared (FTIR), but the coefficients of determination were not high. Quantification by either MS method should therefore be considered semi-quantitative at best, albeit either method has substantial value in environmental fate experiments where relative concentration changes are the desired endpoints rather than absolute concentrations.     

A cytotoxic and apoptosis-inducing sesquiterpenoid isolated from the aerial parts of Artemisia princeps PAMPANINI (Sajabalssuk)

Repeated silica gel and octadecyl silica gel (ODS) column chromatography of the aerial parts of Artemisia princeps PAMPANINI (Sajabalssuk) led to the isolation of a new sesquiterpenoid, 3-((S)-2-methylbutyryloxy)-costu-1(10),4(5)-dien-12,6 alpha-olide (2), along with two previously reported sesquiterpenoids: 8 alpha-angeloyloxy-3beta,4 beta-epoxy-6 beta H,7 alpha H,8 beta H-guaia-1(10),11(13)-dien-12,6 alpha-olide (1, carlaolide B) and 3beta,4 beta-epoxy-8 alpha-isobutyryloxy-6 beta H,7 alpha H,8 beta H-guaia-1(10),11(13)-dien-12,6 alpha-olide (3, carlaolide A). The structure of compound 2 was elucidated by spectroscopic data analysis, including one dimensional (1D) and two dimensional (2D) nuclear magnetic resonance (NMR) experiments. Of the isolates, compound 2 exhibited potent cytotoxicity against human cervix adenocarcinoma cells and induced apoptosis.     

A theoretical investigation of the interactions between water molecules and ionic liquids

Quantum chemical calculations have been used to investigate the interaction between water molecules and ionic liquids based on the imidazolium cation with the anions [Cl(-)], [Br(-)], [BF(4)(-)], and [PF(6)(-)]. The predicted geometries and interaction energies implied that the water molecules interact with the Cl(-), Br(-), and BF(4)(-0 anions to form X(-)...W (X = Cl or Br, W = H(2)O), 2X-...2W, BF(4)(-)...W, and W...BF(4)(-)...W complexes. The hydrophobic PF(6)(-) anion could not form a stable complex with the water molecules at the density functional theory (DFT) level. Further studies indicate that the cation could also form a strong interaction with the water molecules. The 1-ethyl-3-methylimidazolium cation (Emim(+)) has been used as a model cation to investigate the interaction between a water molecule and a cation. In addition, the interaction between the ion pairs and the water was studied by using 1-ethyl-3-methylimidazolium chloride (Emim x Cl) as a model ionic liquid. The strengths of the interactions in these categories follow the trend anion-W > cation-W > ion pair-W.     

Assembly of metal nanoparticle-carbon nanotube composite materials at the liquid/liquid interface

Carbon nanotubes (CNTs)-mediated self-assembly of metal (Au and Ag) nanoparticles at the liquid/liquid interface in the form of a stable nanocomposite film is reported. The metallic luster results from the electronic coupling of nanoparticles, suggesting the formation of closely packed nanoparticle thin films. The interfacial film could be transferred to mica substrates and carbon-coated transmission electron microscopy (TEM) grids. The transferred films were very stable for a prolonged time. The samples were characterized by UV-vis spectroscopy, scanning electron microscopy (SEM), TEM, and X-ray photoelectron spectroscopy (XPS). SEM and TEM results show that the films formed at the liquid/liquid interface are indeed composite materials consisting of CNTs and nanoparticles. XPS measurements further indicate the presence of the interaction between nanoparticles and CNTs.     

Novel β-cyclodextrin modified quantum dots as fluorescent probes for polycyclic aromatic hydrocarbons （PAHs）

Water-soluble CdSe/ZnS quantum dots （QDs） were prepared via a simple sonochemical procedure using β-cyclodextrin （CD） as surface coating agent. The QDs displayed a sensitive emission enhancement for anthracene over other related polycyclic aromatic hydrocarbons, and the detection limit was around 1.6 × 10^-8 mol/L.     

纳米ZnO/聚醋酸乙烯酯复合薄膜的光催化性能研究

采用溶胶-凝胶和浸渍-提拉而后煅烧的方法得到了在可见光作用下具有光催化性能的纳米ZnO/聚醋酸乙烯酯(PVAc)复合薄膜.通过正交设计实验,研究了PVAc的浓度、煅烧温度、煅烧时间、复合薄膜层数和附加ZnO膜层数等工艺因素对光催化性能的影响,并通过SEM,XRD和FT-IR对其进行了分析与表征.在室内普通照明用白炽灯作用下,以甲基橙溶液为催化对象,PVAc含量10%的、在250℃煅烧30min所得到的纳米ZnO/PVAe复合薄膜的光催化性能的实验结果表明,复合薄膜对甲基橙降解率达60%,而使用250℃煅烧30min所得到的纳米ZnO 4层薄膜或PVAc 4层薄膜催化的甲基橙溶液的浓度变化很小.     

Aggregation behavior of a series of anionic sulfonate gemini surfactants and their corresponding monomeric surfactant

A series of anionic sulfonate gemini surfactants with the general structure of [(Cn H2n+1)(C3H6SO(-)3) NCsN(C3H6SO(-)3)(CnH2n+1)].2Na+ have been synthesized. While the spacer group Cs represents p-xylyl or (CH2)3, the surfactants are abbreviated as CnCpxCn(SO3)2 (n=8,10,12) or C12C3C12(SO3)2(n=12), respectively. A corresponding monomeric surfactant C12H25N(CH3)(C3H6SO(-)3).Na+(C12NSO3) has also been prepared. The aggregation behavior of these surfactants has been studied at pH 9.2 and ionic strength of 30 mM. The gemini surfactants exhibit stronger aggregation tendencies and much less endothermic enthalpy changes of micellization (DeltaH mic) compared with the monomeric surfactant. The critical micelle concentrations (CMC) of the gemini surfactants decrease with the increase of the hydrophobic chain length from C8CpxC8(SO3)2 to C10CpxC10(SO3)2, but the CMC values of C10CpxC10(SO3)2 and C12CpxC12(SO3)2 are very close. The DeltaH mic values vary from endothermic for C8CpxC8(SO3)2 to almost zero for C12CpxC12(SO3)2. Besides, vesicles are observed above the CMC for all these surfactants. The water-mediated intermolecular hydrogen bonding between the tertiary nitrogen groups may assist C12NSO3 and C12C3C12(SO3)2 in their vesicle formation, while the pi-pi interaction between aromatic rings should be another additional driving force for the vesicle formation of CnCpxCn(SO3)2. Meanwhile, the hydrogen bonding, pi-pi interaction, and strong hydrophobic interaction provide the possibility of a multilayer formation for C12CpxC12(SO3)2 and C12C3C12(SO3)2 at the air/water interface, which is a possible reason for the extremely small minimum area occupied per surfactant molecule at the air/water interface for these two gemini surfactants.     

A fluorescent chemosensor for cobalt ions based on a multi-substituted phenol-ruthenium(II) tris(bipyridine) complex

An amide-linked 2,6-bis{[(2-hydroxy-5-tert-butylbenzyl)(pyridyl-2-methyl)-amino]-methyl}-4-methylphenol-ruthenium(II) tris(bipyridine) 2PF₆⁻ complex, 1, was first used to recognize Co(II) in EtOH/H₂O (1:1, v/v) solution, with the ruthenium(II) tris(bipyridine) moiety selected as a fluorophore and the multi-substituted phenol unit chosen as a receptor. The fluorescence quenching of 1 was attributed to the formation of an inclusion complex between multi-substituted phenol unit and Co(II) by 1:1 complex ratio (K = 2.5 × 10⁵), which has been utilized as the basis of the fabrication of the Co(II)-sensitive fluorescent chemosensor. The analytical performance characteristics of the proposed Co(II)-sensitive chemosensor were investigated. The sensor can be applied to the quantification of Co(II) with a linear range covering from 1.0 × 10⁻⁷ to 5.0 × 10⁻⁵ M and a detection limit of 5 × 10⁻⁸ M. The experiment results show that the response behavior of 1 to Co(II) is pH-independent in medium condition (pH 4.5–9.5) and show excellent selectivity for Co(II) over transition metal cations except Cu(II). The chemosensor has been used for determination of Co(II) in water samples.     

A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

The interfacial interaction of Mo species with the HBeta zeolite was studied by multinuclear MAS NMR, XRD and N₂ adsorption. As proved by the quantitative ²⁷Al MAS NMR, this interaction is so strong as to dealuminate the framework of HBeta, and leads to a new peak appearing at −14 ppm, which indicates the formation of crystalline Al₂(MoO₄)₃. This can also be detected by XRD measurements when the Mo loading is as high as 9.0 wt.%. The corresponding quantitative ²⁹Si and ¹H MAS NMR spectra show that the amount of silanols and Brønsted acidic sites decrease obviously with increasing Mo loading. This also reveals an interaction between Mo species and HBeta support through an oxygen bridge resulting from condensation with the hydroxyls on the support. At higher Mo loadings, the interaction is so strong that it results in an extraction of aluminum from the zeolite framework, and subsequently appearance of Al₂(MoO₄)₃ and loss of Brønsted acidic sites. These can be correlated to the low catalytic activity of Mo/HBeta in metathesis of ethylene and 2-butylene to propylene.