SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

OSCILLATION FOR NONLINEAR NEUTRAL DIFFERENTIAL EQUATIONS

ＯＳＣＩＬＬＡＴＩＯＮＦＯＲＮＯＮＬＩＮＥＡＲＮＥＵＴＲＡＬＤＩＦＦＥＲＥＮＴＩＡＬＥＱＵＡＴＩＯＮＳ（申建华）（王志成）湖南大学，邮编：４１００８２ＳｈｅｎＪｉａｎｈｕａ；ＷａｎｇＺｈｉｃｈｅｎｇ（ＨｕｎａｎＵｎｉｖｅｒｓｉｔｙ，）Ａｂｓｔｒａｃｔ...     

ON THE EXISTENCE AND UNIQUENESS THEOREMS OF SOLUTIONS FOR A CLASS OF THE SYSTEMS OF MIXED MONOTONE OPERATOR EQUATIONS WITH APPLICATION

ＯＮＴＨＥＥＸＩＳＴＥＮＣＥＡＮＤＵＮＩＱＵＥＮＥＳＳＴＨＥＯＲＥＭＳＯＦＳＯＬＵＴＩＯＮＳＦＯＲＡＣＬＡＳＳＯＦＴＨＥＳＹＳＴＥＭＳＯＦＭＩＸＥＤＭＯＮＯＴＯＮＥＯＰＥＲＡＴＯＲＥＱＵＡＴＩＯＮＳＷＩＴＨＡＰＰＬＩＣＡＴＩＯＮＳＨＥＮＰＥＩＬＯＮＧ...     

超短脉冲激光微束对细胞作用的研究

本文详细地介绍了我们自己设计和安装的一个Nd:YAG超短脉冲激光微束系统,该系统分成二个部分:激光源和显微镜。由电光调Q非稳腔Nd:YAG激光倍频后得到355nm紫外光进入显微镜并由物镜聚焦。同时,这超短脉冲激光微束照射在细胞上并且在细胞上产生一个可以自恢复的小孔。在文中我们还讨论了超短脉冲激光微束与细胞之间作用效应及机理。     

用于光学神经网络硬件系统误差纠正的虚拟神经网络

提出了一种用于修正光学神经网络硬件系统误差的虚拟神经网络模型，光学实验结果表明该网络能够有效地消除硬件系统误差对实验结果的影响。     

Angular momentum effect in prescission particle multiplicities for a light system by diffusion model

The effect of angular momentum on the competition between fission and particle emission during light system fission process was studied via fission diffusion model. The prescission particle multiplicities were found to increase with decreasing angular momentum. The experimental prescission proton and α particle multiplicities can be fitted for 10.6 MeV/nucleon ⁸⁴Kr(²⁷Al,binary fission) reaction with this model. Entrance channel effect found in [1] is proved to be angular momentum effect.     

激光等离子实验中的低能X射线时间谱解谱方法

利用快速Fourier变换(FFT)算法和反卷积原理对Dante谱议测量波形进行了回推获得了激光等离子体源区低能X射线辐射时间波形。解谱方法采用了W.N.Mcelroy等人提出的SANDⅡ解谱方法并与文献[6]中介绍的限幅迭代和周期性光滑技术相配合计算出了能谱时间关系的16分区结果,给出了1989年6月LF-12强激光装置实验的双束靶、漏靶诊断口,入射口的X射线时间谱以及辐射温度时间关系T_R(i)。     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

Synthesis of cellulose carbamate by supercritical CO2-assisted impregnation: Structure and rheological properties

Cellulose carbamate, an environmentally friendly material presents an interesting alternative to petroleum-based polymers because of its renewable, biodegradable, biocompatible nature and its solubility in conventional solvents. In synthesis process of cellulose carbamate, urea was firstly impregnated into the cellulose pulp by supercritical CO₂(scCO₂), followed by the esterification of cellulose. The structure of cellulose carbamate was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The rheological properties of these cellulose carbamates in 9% sodium hydroxide solution were investigated, using a range of the nitrogen content, concentrations and shear rates.