Highly sensitive hybridization assay using the electrochemiluminescence of an ITO electrode, CdTe quantum dots functionalized with hierarchical nanoporous PtFe nanoparticles, and magnetic graphene nanosheets

We report on a disposable microdevice suitable for sandwich-type electrochemiluminescence (ECL) detection of DNA. The method is making use of CdTe quantum dots functionalized with hierarchical nanoporous PtFe (CdTe@PtFe) nanoparticles and with magnetic graphene nanosheets. The latter were selected as carriers for the capture DNA due to their excellent biomagnetic separation capability and electrical properties. The CdTe@PtFe nanoparticles were used to label the signal DNA which resulted in distinctly enhanced ECL owing to the large specific surface area and good electrical conductivity of the PtFe alloy. A DNA sensor was constructed on a disk-shaped indium tin oxide electrode that was fabricated via etching. Under optimal conditions, the biosensor responds linearly to DNA in the 0.02 fM to 5000 fM concentration range, with a detection limit as low as 15 aM. The electrode is regenerable. The method displays excellent specificity, extremely good sensitivity, and is highly reproducible.

Critical behavior of brittle‐ductile transition of polymers

We report that the brittle‐ductile transition of polymers induced by temperature exhibits critical behavior. When t close to 0, the critical surface to surface interparticle distance (ID_c) follows the scaling law: ID_c ∝ t^?v, where t = 1 ? T/T (T and T are the test temperature and brittle‐ductile transition temperature of matrix polymer, respectively) and v = 2/D. It is clear that the scaling exponent v only depends on dimension (D). For 2, 3, and 4 dimension, v = 1, 2/3, and 1/2 respectively. The result indicates that the ID_c follows the same scaling law as that of the correlation length (ξ), when t approach to zero. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 766–769, 2008     

Preparation of a blocked isocyanate compound and its grafting onto styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer

The ε-caprolactam was used to block the isocyanate group to enhance the storage stability of allyl (3-isocyanate-4-tolyl) carbamate. The spectra of FTIR and NMR showed that blocked allyl (3-isocyanate-4-tolyl) carbamate (BTAI) possesses two chemical functions, an 1-olefin double bond and a blocked isocyanate group. The FTIR spectrum showed BTAI could regenerate isocyanate group at elevated temperature. DSC and TG/DTA indicated the minimal dissociation temperature was about 135 °C and the maximal dissociation rate appeared at 226 °C. Then the styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer (SEBS) was functionalized by BTAI via melt free radical grafting. The effect of temperature, monomer and initiator concentrations on the grafting degree and grafting efficiency was evaluated. The highest grafting degree was obtained at 200 °C. The grafting degree and grafting efficiency increased with the enhanced concentration of BTAI or initiator. The weight-average molecular weight (M_w) increased greatly at higher initiator concentration and lower ratio of the monomer/initiator. And the molecule weight distribution (MWD) of the modified SEBS became wider than that of pure SEBS. It is obvious that shearing thinning behavior of grafted SEBS is more profound than pure SEBS.     

The influence of high dielectric constant core on the activity of core-shell structure electrorheological fluid

The core-shell structural dielectric particles are applied widely in the electrorheological (ER) fluids. The properties of the dielectric core are critical factors influencing their ER activity. In this paper, we successfully synthesized two kinds of core-shell hydroxyl titanium oxalate (TOC) particles with SiO(2) and TiO(2) as core, respectively. The obtained core-shell structural SiO(2)-TOC and TiO(2)-TOC particles were well-dispersed spherical nanoparticles with ideal morphology and a narrow size distribution. Under DC electric fields, the TiO(2)-TOC ER fluid showed notable ER activity with a yield stress of about 96 kPa (at 4 kV/mm), which is 3 times of that SiO(2)-TOC ER fluid and outclassed the yield stress of the TOC ER fluid. The dielectric spectra indicated that the higher dielectric constant of TiO(2) core induces the stronger interaction between the neighboring particles, which contribute to the enhancement of ER activity.     

X-ray absorption, photoemission spectroscopy, and Raman scattering analysis of amorphous tantalum oxide with a large extent of oxygen nonstoichiometry

The electronic structure and modification of the local interatomic structure of a reactive sputtered amorphous tantalum oxide (a-TaO(x)) thin film with the variation of oxygen nonstoichiometry, x in a-TaO(x) have been investigated by X-ray absorption spectroscopy (XAS), X-ray photoemission spectroscopy (XPS), Raman scattering spectroscopy, and Rutherford back scattering spectroscopy. A parallel chemical shift of Ta4f(7/2) and O1s core levels observed with the variation of x indicates the Fermi level shift by reduction and oxidation in the framework of the rigid band model. Extended X-ray absorption fine structure (EXAFS) suggests both the increase of average coordination number of the first Ta-O shell in polyhedra and a considerable reduction of the average Ta-O bond length with the increase of x. The relative intensity of Raman shift peaks at 670 cm(-1) and 815 cm(-1), corresponding to Ta-O stretching of TaO(6) octahedra and TaO(5) probably with a pyramidal form, respectively, drastically changes between x = 2.47 to 1.86, suggesting the change in the predominant polyhedron from TaO(6) to TaO(5) with a modification in multiplicity of oxygen by the reorganization of the polyhedral network.     

Synthesis, crystal structure and photoluminescence of 2,6-dimethylanthracene and its pseudo-triptycene derivatives

A simple one-step synthesis of 2,6-dimethylanthracene, 1, in high yield is reported utilizing the easily accessible benzyl alcohol as the starting material. Based on 2,6-dimethylanthracene, two pseudo-triptycene compounds, cis-2,6-dimethyl-9,10-dihydroanthracene-9,10-endo-α,β-succinic anhydride, 2, and cis-2,6-dimethyl-9,10-dihydroanthracene-9,10-endo-α,β-succinyl amine, 3, are firstly synthesized in high yield and they are characterized by single crystal X-ray diffraction. Compound 2 crystallizes in triclinic space group and compound 3 crystallizes in monoclinic P2₁/c space group. Both compound 2 and 3 exhibit cis-configurations and endo-conformations. Compound 1 exhibits very intense photoluminescence property due to the delocalized electron in the whole molecule, whereas fluorescence quench happens to some extents due to the destruction of the conjugated structure in compound 2.     

Ru/CeO2催化剂催化苯乙烯氢甲氧基羰基化反应高选择性制备直链酯类化合物

酯类化合物在工业上具有广泛应用,例如可用于合成香水、调味剂(味精)、洗涤剂和表面活性剂等.其中,烯烃的氢烷氧基羰基化反应是一种合成酯类化合物的重要方法,其低消耗、100%的原子经济性和原料的易获得等优势使其在制备酯类化合物中成为一个有效且实际可行的方法.对于该反应,文献多采用Pd或Rh的络合均相催化剂,其中控制反应过程中直链酯类化合物(L)和支链酯类化合物(B)的选择性是一项颇具挑战性的课题.虽然目前可通过配体的设计和修饰来调节,但多集中在均相催化体系,因此在选择性调变方面的研究仍很欠缺.相对于均相催化,多相催化由于产物易分离和提纯、催化剂可循环使用等优势而逐渐引起了研究者的广泛关注.在多相催化体系中, Pd负载在强酸性树脂作为催化剂已被应用于苯乙烯氢甲氧基羰基化反应,但在该反应中支链酯类化合物为主要产物.因此,寻找一个可有效改善多相反应体系中选择性问题的方法是非常有意义的.在本研究工作中,我们分别以CeO2纳米颗粒(NP)、CeO2纳米棒(Rod)和CeO2纳米立方体为载体,利用浸渍法制备了Ru/CeO2、Ru/CeO2-rod和Ru/CeO2-cube三种催化剂,并进一步用于苯乙烯氢甲氧基羰基化反应.探究了CO压力、反应温度和反应时间对三种催化剂催化苯乙烯氢甲氧基羰基化反应的影响.结果表明, Ru/CeO2作为多相催化剂催化苯乙烯氢甲氧基羰基化反应时,苯乙烯选择性高于99%,直链酯选择性为83%,支链酯选择性为12%.机理研究表明,该反应为自由基机理.动力学分析表明,该反应的反应活化能为48.50 k Jmol^–1.结合三种催化剂的反应活性以及HRTEM结构表征结果可知,该反应中L/B比值与Ru的尺寸有较大关系.进一步的拉曼表征和NH3-TPD表征结果证明, Ru的尺寸与金属-载体之间的相互作用以及催化剂表面的氧空位浓度有直接关系.     

Fluorescence-based immunoassay for human chorionic gonadotropin based on polyfluorene-coated silica nanoparticles and polyaniline-coated Fe3O4 nanoparticles

We report on an ultrasensitive fluorescence immunoassay for human chorionic gonadotrophin antigen (hCG). It is based on the use of silica nanoparticles coated with a copolymer (prepared from a fluorene, a phenylenediamine, and divinylbenzene; PF@SiO₂) that acts as a fluorescent label for the secondary monoclonal antibody to β-hCG antigen. In parallel, Fe₃O₄ nanoparticles were coated with polyaniline, and these magnetic particles (Fe₃O₄@PANI) served as a solid support for the primary monoclonal antibody to β-hCG antigen. The PF@SiO₂ exhibited strong fluorescence and good dispersibility in water. A fluorescence sandwich immunoassay was developed that enables hCG concentrations to be determined in the 0.01–100 ng·mL^?1 concentration range, with a detection limit of 3 pg·mL^?1.

Patterning Surfaces for Controlled Platelet Adhesion and Detection of Dysfunctional Platelets

Platelets play a fundamental role in thrombus formation and in the pathogenesis of arterial thrombosis. Patterning surfaces for controlled platelet adhesion paves the way for adhesion and activation mechanisms in platelets and detection of platelet functional defects. Here, a new and simple method based on controlled polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) on the surface of styrene‐block‐(ethylene‐co‐butylene)‐block‐styrene (SEBS) is shown. The competition between polymerization and degradation enables platelet adhesion on SEBS to be switched on and off. The adhesive sites of the platelets can be down to single cell level, and the dysfunctional platelets can be quantitatively detected.

     

Double-Network Heparin Dynamic Hydrogels: Dynagels as Anti-bacterial 3D Cell Culture Scaffolds

Double cross-linked dynamic hydrogels, dynagels, have been prepared through reversible imine bonds and supramolecular interactions, which showed good pH responsiveness, injectability, self-healing property and biocompatibility. With the further encapsulation of heparin, the obtained hydrogels exhibited good anti-bacterial activity and promotion effects for 3D cell culture.