The improvement of corrosion resistance of Ce conversion films on aluminum alloy by phosphate post-treatment

A phosphate post-treatment process for Ce conversion film on aluminum was studied. SEM (scanning electronic microscope), XPS (X-ray photoelectron spectroscopy) and electrochemical measurements were used to characterize the properties of the films. After the post-treatment the micro-cracks on the film surface obviously diminished, and corrosion resistance of the conversion film in NaCl solution increased. The conversion film, without post-treatment, was mainly composed of hydrated cerium oxides, and the dehydration of the film may cause cracking of the films. After phosphate treatment, stable cerium phosphate CePO₄ was formed on the surface, and the content of crystal water decreased greatly, leading to improvement of the film performance with less micro-cracks.     

Excitation-power dependence of the near-band-edge photoluminescence of ZnO inverse opals and nanocrystal films

The excitation-power dependence of the near-band-edge emission in ZnO inverse opals and nanocrystal films has been studied. The dependence of the photoluminescence intensity I on the excitation power L can be described by a power law, i.e., I∼L^α, where α is an exponent that is often used to identify the origin of the near-band-edge emission from semiconductors in previous models. However, in this work, it was found that the values of α show a strong variation between ZnO inverse opals and nanocrystal films. And our results show that the change of α is mainly caused by the laser heating effects. Therefore, the value of α could not be simply employed to unequivocally evaluate the origin of the near-band-edge emission in complex nanostructures.     

Dielectric and piezoelectric properties of Fe2O3-doped (Na0.5K0.5)0.96Li0.04Nb0.86Ta0.1Sb0.04O3 lead-free ceramics

The effect of a small amount Fe₂O₃ (0.1-2 mol%) doping on the electrical properties of (Na_0.5K_0.5)_0.96Li_0.04Nb_0.86Ta_0.1Sb_0.04O₃ (NKLNTS) ceramics was investigated. It was found that the B-site substitution of Fe³⁺ does not change the crystal structure within the studied doping level and all modified ceramics have a pure tetragonal perovskite structure at room temperature. The addition of Fe₂O₃ can promote the sintering of NKLNTS ceramics, and simultaneously cause the grain growth so that Fe³⁺-doped NKLNTS compositions show degraded densification at higher doping level. Furthermore, the dielectric properties of the NKLNTS ceramics do not show a significant change by Fe₂O₃ doping. However, the addition of Fe₂O₃ was found to have a significant influence on the electric fatigue resistance and the durability against water. The presence of oxygen vacancies caused by the replacement of Fe³⁺ for B-site ions makes the NKLNTS ceramics harder.     

Ferromagnetism of MnxLiyZn1−x−yO films

We had prepared Mn-doped ZnO and Li, Mn codoped-ZnO films with different concentrations using spin coating method. Crystal structure and magnetic measurements demonstrate that the impurity phases (ZnMnO₃) are not contributed to room temperature ferromagnetism and the ferromagnetism in Mn-doped ZnO film is intrinsic. Interesting, saturated magnetization decreases with Mn or Li concentration increase, showing that some antiferromagnetism exists in the samples with high Mn or Li concentration. In addition, Mn_0.05Zn_0.95O film annealed in vaccum shows larger ferromagnetism than the as-prepared sample and more oxygen vacancies induced by annealing in reducing atmosphere enhance ferromagnetism, which supports the bound magnetic polaron model on the origin of room temperature ferromagnetism.     

Reproducibility of the quantitative assessment of cartilage morphology and trabecular bone structure with magnetic resonance imaging at 7 T

To assess the reproducibility of quantitative measurements of cartilage morphology and trabecular bone structure of the knee at 7 T, high-resolution sagittal spoiled gradient-echo images and high-resolution axial fully refocused steady-state free-precession (SSFP) images from six healthy volunteers were acquired with a 7-T scanner. The subjects were repositioned between repeated scans to test the reproducibility of the measurements. The reproducibility of each measurement was evaluated using the coefficient(s) of variation (CV). The computed CV were 1.13% and 1.55% for cartilage thickness and cartilage volume, respectively, and were 2.86%, 1.07%, 2.27% and 3.30% for apparent bone volume over total volume fraction (app.BV/TV), apparent trabecular number (app.Tb.N), apparent trabecular separation (app.Tb.Sp) and apparent trabecular thickness (app.Tb.Th), respectively. The results demonstrate that quantitative assessment of cartilage morphology and trabecular bone structure is reproducible at 7 T and motivates future musculoskeletal applications seeking the high-field strength's superior signal-to-noise ratio.     

Real-time animal functional magnetic resonance imaging and its application to neuropharmacological studies

In pharmacological magnetic resonance imaging (phMRI) with anesthetized animals, there is usually only a single time window to observe the dynamic signal change to an acute drug administration since subsequent drug injections are likely to result in altered response properties (e.g., tolerance). Unlike the block-design experiments in which fMRI signal can be elicited with multiple repetitions of a task, these single-event experiments require stable baseline in order to reliably identify drug-induced signal changes. Such factors as subject motion, scanner instability and/or alterations in physiological conditions of the anesthetized animal could confound the baseline signal. The unique feature of such functional MRI (fMRI) studies necessitates a technique that is able to monitor MRI signal in a real-time fashion and to interactively control certain experimental procedures. In the present study, an approach for real-time MRI on a Bruker scanner is presented. The custom software runs on the console computer in parallel with the scanner imaging software, and no additional hardware is required. The utility of this technique is demonstrated in manganese-enhanced MRI (MEMRI) with acute cocaine challenge, in which temporary disruption of the blood-brain barrier (BBB) is a critical step for MEMRI experiments. With the aid of real-time MRI, we were able to assess the outcome of BBB disruption following bolus injection of hyperosmolar mannitol in a near real-time fashion prior to drug administration, improving experimental success rate. It is also shown that this technique can be applied to monitor baseline physiological conditions in conventional fMRI experiments using blood oxygenation level-dependent (BOLD) contrast, further demonstrating the versatility of this technique.     

Study on the activity and mechanism of skimmianine against human non-small cell lung cancer

The present research was to investigate the effects of skimmianine (SK) in four non-small cell lung cancer (NSCLC) cells. We found that SK can significantly inhibit the growth of NSCLC cells and markedly induce apoptosis in NSCLC cells. The effects of growth inhibition and apoptosis induction were in a concentration–response relationship and caspase-dependent manner.     

In Situ Generated Gold Nanoparticles on Active Carbon as Reusable Highly Efficient Catalysts for a C −C Stille Coupling

Gold nanoparticle catalysts are important in many industrial production processes. Nevertheless, for traditional C ?C cross‐coupling reactions they have been rarely used and Pd catalysts usually give a superior performance. Herein we report that in situ formed gold metal nanoparticles are highly active catalysts for the cross coupling of allylstannanes and activated alkylbromides to form C ?C bonds. Turnover numbers up to 29 000 could be achieved in the presence of active carbon as solid support, which allowed for convenient catalyst recovery and reuse. The present study is a rare case where a gold metal catalyst is superior to Pd catalysts in a cross‐coupling reaction of an organic halide and an organometallic reagent.