基于宽度可调节的线缺陷平板型光子晶体的空气槽微腔

研究了一种空气槽光子晶体微腔,这种腔是由在平板型光子晶体上引入一条宽度可以调节的线缺陷空气槽形成的.腔模的电场被强烈局限在空气槽中,由于介电常量的不连续性,电场得到很大的提高,同时模体积被大大地降低.数值模拟与分析了微腔的能带结构和场分布,考虑到腔模的谐振频率和对称性,发现一阶偶膜同时具有较高的品质因子和较小的模体积;应用有限时域差分法,得到腔模的品质因子可以高达10⁶,模体积仅为0.02(λ/n)³.计算了一阶偶模谐振波长随空气槽宽度以及空气孔半径的变化,发现随着宽度的增加,波长越来越短.而随着空气孔半径的增加,波长近似线性地减小;当空气孔半径为170 nm时,可以获得最高的腔品质因子.     

Determination of the cluster spectroscopic factor of the 10.3 MeV state in 12Be

From an inelastic excitation and breakup experiment with a ¹²Be beam at 29 MeV/u, a large ⁴He+⁸He cluster decay width of 1.1(2) MeV is determined for a state at an excitation energy of 10.3 MeV and with a spin parity of 0+. By using the R-matrix analysis, a cluster spectroscopic factor of 0.53(10) is extracted from the cluster partial width, providing a strong support for the clustering structure in ¹²Be. A specially designed zero-degree telescope played an essential role in the present experiment and has been demonstrated to be a promising tool in future studies of the molecular-like resonances near the cluster separation threshold.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

一种中药荧光指纹图谱的光谱图像构建方法

利用液晶光谱仪通过光谱成像法对黄柏和人参总皂甙进行了荧光光谱图像检测,采用滤波器与像素点定位联用的方法提取有效像素点,获取它们的荧光光谱图像,绘制了相应的中药荧光指纹图谱.结合欧氏距离的判定方法,将滤波器与像素点定位联用法、像素点优选法和背景差分算法所得的荧光指纹图谱进行比较,三种方法的差异由小到大的排序为滤波器与像素点定位联用法,背景差分算法,像素点优选法.说明滤波器与像素点定位联用法所得荧光指纹图谱稳定性最好,谱线最优.实验结果表明该方法可以用于构建中药荧光指纹图谱,从而提出了一种新的用于中药指纹图谱构建中提取有效像素点的可行方法.     

Influence of laser power density on damage of comb by photodynamic therapy—simulation and validation of mathematical models

Photodynamic therapy （PDT） has poor therapeutic outcomes for the treatment of port-wine stain （PWS） lesions with long drug-light intervals （DLIs）. This letter investigates the possibility of improving the treatment efficacy through increasing the laser power density using a computer simulation and a cock comb model. The computational model includes a Monte Carlo simulation for the laser distribution and a calculation of the singlet oxygen concentrations （102）. Both simulation and experimental results show that increasing the power density from i00 to 140 mW/cm^2 not only improves the PDT efficacy, but also results in the unwanted skin damage.     

First-principles calculations for electronic and optical properties of the zinc-blende structured BeS compound under pressure

The electronic and the optical properties of the cubic zinc-blende (ZB) BeS under high pressure have been investigated by using \it ab initio plane-wave pseudopotential density functional theory method in the generalised gradient approximation (GGA) for exchange-correlation interaction. The electronic band structure and the pressure dependence of the total and partial densities of state under pressure are successfully described. Our calculations show that the ZB BeS has large and indirect band gaps associated with (Γ → X) transitions in ambient conditions. The results obtained are consistent with the experimental data available and other calculations. The optical properties, including dielectric function, energy-loss function, complex refractive index, reflection and absorption spectra, are investigated and analysed at different external pressures. The results suggest that the optical absorption appears mostly in the ultra-violet region and the curve of refractive index shift toward high energies (blue shift) with pressure increasing.     

ICRH带状双天线的间距对等离子体耦合特性的影响

采用能量一次吸收假设、等离子体平板模型和三维天线模型数值模拟离子回旋共振加热时带状双天线与等离子体的耦合过程,得到天线的辐射功率、等离子体的吸收功率密度分布随天线间距变化的关系.通过对比分析,得出结论:在一定实验条件下,当带状双天线同相馈电时,天线间距越小,离子回旋共振加热效果越好.     

基于光纤光栅的输油管道安全监测系统

针对穿插于滑坡体内的输油管道,提出一种基于光纤光栅传感的管道安全监测系统。系统由光开关和光纤光栅解调仪共同完成数据的自动测量和存储,并利用GPRS方式进行数据传输。利用已知管道上三点应力求最大应力的方法,选用自行研制的光纤光栅传感器监测管体应力。该传感器除了具有抗电磁干扰、耐腐蚀、稳定性好的优点,还可以实现温度补偿,不但排除了温度对测量结果的影响,还可以测量环境温度。经实际应用证明：该监测系统可实现实时监测,性能稳定。