β-D-核糖(RI)与一价、二价金属离子相互作用的理论研究

在HF和MP2水平用全电子(AE)和相对论有效芯势(RECP)方法研究了Ⅰa、Ⅰb、Ⅱa和Ⅱb族金属离子与β-D-核糖(RI)的相互作用.结果表明,RECP能可靠地用于重金属离子;二价金属离子(M2+)比一价金属离子(M+)更易使β-D-核糖(RI)变形;二价金属离子络合物(RI-M2+)比一价金属离子络合物(RI-M+)稳定.电荷布居分析的结果支持上述结论.     

Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst

In this report, a simple process for preparing HFC-245fa through the reaction of 1,1,1,3,3-pentachloropropane (PCP) and anhydrous HF via two-step vapor-phase catalytic fluorination is described. The antimony pentafluoride catalyst was supported on inert porous materials to improve the catalytic activity. The resulting process catalyst not only exhibited high catalytic activity and excellent thermo-stability, but also improved the performance of SbF₅, in terms of hygroscopicity and corrosion.     

四足配体铽配合物-蒙脱土超分子复合发光材料的插层组装、表征和性质研究

用两种方法分别将四足配体铽配合物[TbL（NO3）]^2＋和[TbL]^3＋插层组装到了蒙脱土（MT）层板间，制备出超分子复合发光材料[TbL（NO3）^2＋-MT和[TbL]^3＋-MT。方法一：通过离子交换反应让配离子[TbL（NO3）]^2＋取代钠＋基蒙脱土（Na-MT）中的Na^＋离子，插层组装到蒙脱土层板间。方法二：用配体L与铽基蒙脱土（Tb-MT）反应，使配体插入蒙脱土层板间与Tb^3＋离子配位。用元素分析、XRD，FT-IR,UV-vis和热分析对材料进行了表征，并对其荧光性质进行了研究。结果表明，复合材料保持了蒙脱土良好的层柱结构特征，其层间距d001值与插层配离予的直径吻合较好，配离子以单层形式分布于蒙脱土层板间，复合材料中配合物的热稳定性有明显提高。在紫外光激发下，复合材料发出较强的Tb^3＋特征荧光，其发射光谱与相应配合物的发射光谱很相似；复合材料中配合物的相对荧光强度较相应纯配合物有明显提高。荧光寿命较长；配合物的激发波长向可见光区发生位移，说明插层组装实现了对配合物激发波长的调制作用。     

铝与溴代二甲氨基苯基荧光酮的多元配合物的光度研究

本文研究了在表面活性剂存在性，铝与溴代二甲氨基苯基荧光酮的显色反应。在弱酸性介质中，Ａｌ＾３＋ＢＤＭＡＦ－ＣＴＭＡＢ三元配合物在水浴加热至７０℃－８０℃时形成，其最大吸收波长为５７７ｎｍ，Ａｌ＾３＋：ＢＤＭＡＦ＝１：２，表观摩尔吸光系数为１．３４×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，表观稳定常数为７．４×１０＾５。在ＰＨ９．５－１０．５的氨性缓冲介质中，Ａｌ＾３＋－Ｆ＾－－ＢＤＭＡＦ－非离子表面     

DETECTION OF T_g BY MODULATED DIFFERENTIAL SCANNING CALORIMETRY

The glassy transition of the polyethylene terephthalate (PET) sampleswhich have been subjected to solvent induced crystallization (SINC) was investigated bymodulated differential scanning calorimetry (MDSC) and density measurement. The dif-ferential of heat capacity signal, d C_p/dT from MDSC, was used to monitor the SINCprocess. It reveals that the T_g temperature shifts to higher value with the advancement ofSINC. When the toluene-immersing time was longer (168h), the detection of T_g becomemore difficult, because some smaller peaks emerged at the lower temperatures and theseare explained as the movement of small segments in the amorphous region. These observedresults are due to the morphology and structure introduced by the SINC process.     

含铈多元氧化物的活性结构及在丙烯氨氧化中的作用

本文利用流化床反应器研究了多元复合氧化物PMo_(12)Bi_3Fe_(8-x)Ce_xK_(0.1)O_y(x=0-8)中稀土元素铈对丙烯氨氧化的催化作用,并用x-射线衍射、红外光谱、扫描电镜和热重技术表征了催化剂的结构,发现x=2-3时,丙烯腈的收率最高。催化剂中存在Fe_2(MoO_4)_3,Ce_2(MoO_4)_3、α-Bi_2O_3、3MoO_3。这三种物相的互相溶解和凝结形成固溶体和准均相,使活源。份在各物相表面或界面上均匀分布,由此产生的各活性组份的协调作用是催化活性的主要来性组铈能抑制MoO_3升华,稳定活性相结构。     

Monitoring of the conversion from triptolide to tripchlorolide in Triptergium wilfordii by micellar electrokinetic caillary chromatography

A novel concocting method to convert Triptolide (T) into Tripchlorolide (T(4)) in the traditional Chinese herb Tripterygium wilfordii Hook F. and a micellar electrokinetic capillary chromatographic (MEKC) approach by which the conversion of Triptolide (T) and Tripchlorolide (T(4)) was identified and determined had been established. Investigations of the influence of different pH values of boric acid and borax buffer and of sodium dodecyl sulfate (SDS) and organic additive concentrations had been carried out, and the optimum separation for T and T(4) was achieved using boric acid and borax of pH 7.0 with 30 mM SDS and 20% (volume ratio) methanol as the running buffer. It was found that MEKC exhibited good accuracy, precision and repeatability and the content of T(4) was greatly increased in the herb that was treated by the new concocting method.     

生物特异性功能高分子

模仿天然生物活性高分子关键作用点的化学组成，在高分子链上接上各种官能团或化学残基，制备具有与该天然高分子相似生物活性的高分子，即生物特异性功能高分子。本文主要介绍拟肝素高分子和似粘连 蛋白高分子两种生物特异性功能高分子。     

LnSrNiO4-λ系列复合氧化物的物化性质与对NO分解的催化性能

用柠檬酸络合法合成了Ｋ２ＮｉＦ４结构的ＬｎＳｒＮｉＯ４－λ（Ｌｎ＝Ｌａ，Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ）系列稀土取代类钙钛石型复合氧化物催化剂，对该系列催化剂的固态物理、化学性质及其对ＮＯ分解的催化性能进行研究。结果表明，该系列复合氧化物催化剂对ＮＯ分解活性都很高，在此基础上对该系列复合氧化物中稀土元素对ＮＯ分解反应的取代效应进行了探讨。     

Polylactide hollow spheres fabricated by interfacial polymerization in an oil-in-water emulsion system

A one-step pathway has been adopted to fabricate biodegradable polylactide (PLA) hollow spheres by interfacial polymerization in an oil-in-water emulsion system. The mechanism of sphere formation is suggested with respect to interfacial cross-linking polymerization and subsequent precipitation of the unreacted PLA macromonomers onto the preformed shells. Their hollow nature and morphology were verified by transmission electron microscopy and scanning electron microscope characterizations.