Effect of temperature on the surface free energy of amorphous carbon films

Diamond-like carbon (DLC) and tetrahedral amorphous carbon (ta-C) have attracted much attention recently for biomedical and antifouling applications due to their excellent biocompatibility and inherent nonstick properties. It has been demonstrated that the solid surface free energy is a dominant factor in cellular or fouling adhesion. However, few data for the surface free energy of DLC and ta-C coatings at temperatures in the range 37-95 degrees C are available. In this study DLC and ta-C coatings on stainless steel 304 sheets were prepared using an unbalanced magnetron sputtering system and a filtered cathodic vacuum arc system, respectively. The contact angles of water, diiodomethane and ethylene glycol on the coated surfaces at temperatures in the range 20-95 degrees C were measured using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the coatings and their components (e.g., dispersion, polar or acid/base portions) were calculated using various methods. The experimental results showed that the total surface free energy and dispersive surface free energy of the ta-C coatings, DLC coatings, stainless steel 304 and titanium decreased with increasing surface temperature, while the acid-base SFE component increased with increasing temperature.     

SSZ-53 and SSZ-59: two novel extra-large pore zeolites

The syntheses, structure solutions, and physicochemical and catalytic characterizations of the novel zeolites SSZ-53 and SSZ-59 are described. SSZ-53 and SSZ-59 were synthesized under hydrothermal conditions with the [1-(4-fluorophenyl)cyclopentylmethyl]trimethyl ammonium cation and 1-[1-(4-chlorophenyl)cyclopentylmethyl]-1-methyl azocanium cation, respectively, as structure-directing agents. The framework topology of SSZ-53 was solved with the FOCUS method, and the structure of SSZ-59 was determined by model building. Rietveld refinement of synchrotron X-ray powder diffraction data confirms each proposed model. SSZ-53 and SSZ-59 each possess a one-dimensional channel system delimited by 14-membered rings. Results from transmission electron microscopy, electron diffraction, catalytic experiments (spaciousness index and constraint index tests), and argon and hydrocarbon adsorption experiments are consistent with the proposed structures.     

以环糊精为模板剂制备不同粒径CeO2纳米粒子

稀土化合物由于具有许多特殊的性质而引起了世界各国科学家的高度重视.CeO2是一种廉价而用途很广的材料,如用于发光材料、催化剂、电子陶瓷、玻璃的抛光等.尤其,CeO2因具有特殊的储氧和释氧能力而作为重要的助催化剂在汽车尾气催化净化中得到广泛应用[1,2].大量文献研究表明,制     

Ab initio studies of small AlmFen clusters

The equilibrium geometrical structures of small Al_mFe_n clusters have been determined through ab initio calculation of the cluster total energy at the UB3LYP/Lanl2dz level. For dimers of iron and aluminum, the dissociation energies, the equilibrium atomic distances, and the vibrational frequencies were calculated. The agreement between calculations and experiments is reasonable. The ground stable geometrical structures of Fe₄, FeAl₃, Fe₃Al and Fe₂Al₂ clusters favor three-dimension configurations, but Al₄ tetramers are planar structures. The Al-rich tetramers are more stable than the other two composition tetramers. This is different from that of bulk alloys.     

Efficient degradation of organic pollutants mediated by immobilized iron tetrasulfophthalocyanine under visible light irradiation

Supported iron tetrasulfophthalocyanine can efficiently catalyze the degradation of organic pollutants by H2O2 under visible light irradiation in an aqueous solution, and the catalyst can be easily recycled without apparent loss of activity.     

Measurement of L&agr; and Lß X-ray fluorescence cross sections in Er, Ta, W and Au by 16.896–59.543 keV photons

La and Lb X-ray fluorescence cross sections in Er, Ta, W and Au at excitation energies of 16.896, 22.581, 25.770, 32.890, 38.184, 43.949, 50.214 and 59.5 keV were investigated. Measurements were made using a low energy Si(Li) detector coupled to a model 4096 computerized multi-channel analyser. The experimental results were compared with the theoretically calculated values of L X-rays fluorescence cross sections and other experimental results. Good agreement was observed between experimental and theoretical values.     

Colorimetric assay for lysozyme using Micrococcus luteus labeled with a blue dye, Remazol brilliant blue R, as a substrate.

Micrococcus luteus (M. lysodeikticus) labeled with Remazol brilliant blue R (blue ML) was prepared as a novel substrate for the colorimetric assay of lysozyme. The treatment of the labeled substrate with lysozyme resulted in the release of soluble blue products which can be easily measured spectrophotometrically at 600 nm. The blue color was most efficiently released at pH 7 and ionic strength of 0.2 on incubation with hen lysozyme at 40 degrees C. A new colorimetric method for the assay of lysozyme using this substrate was developed. The assay system gave a linear dose-response curve, and as little as 0.1 microgram of human lysozyme (1 microgram/ml, 100 microliters) can be detected. The present method is more convenient and reproducible than the conventional lysozyme assay with bacterial cells. Application of the system to the determination of lysozyme in human serum is described.     

离线超临界流体萃取和气相色谱/质谱联用对实验室内空气中气相有机污染物的测试

通过团体吸附剂富集，再用超临界ＣＯ２脱附后用气相色谱及质谱技术对实验室内空气中气相有机污染物进行了考察。文中对采样和萃取条件进行了优化，并与热脱附所得结果做了比较。结果表明在２２ＭＰａ，８０℃时，用甲醇改性的超临界ＣＯ２进行萃取的结果优于热脱附法。该法鉴定出气相有机污染物中５２个组分，占色谱峰总面积的９９．６％。     

Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997     

Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.