Transition to Film Boiling in Microgravity： Influence of Subcooling

The transition process to film pool boiling in microgravity is studied experimentally aboard the Chinese recoverable satellite S J-8. A quasi-steady heating method is adopted, in which the heating voltage is controlled to increase exponentially with time. Small, primary bubbles are formed and slid on the surface, which coalesce with each other to form a large coalesced bubble. Two ways are observed for the transition from nucleate to film boiling at different subcoolings. At high subcooling, the coalesced bubble with a smooth surface grows slowly. It is then difficult for the coalesced bubble to cover the whole heater surface, resulting in a special region of transition boiling in which nucleate boiling and local dry areas can coexist. In contrast, strong oscillation of the coalesced bubble surface at low subcooling may cause rewetting of local dry areas and activation of more nucleate sites, resulting in an abrupt transition to film boiling.     

无加热氧碘化学激光器超音速喷管

针对氧碘化学激光器的金属喷管在使用过程中需加热保温且存在结构复杂、故障率高等问题,初步选择了几种可用于加工无加热喷管的非金属材料,并以kW级氧碘化学激光器为原型,以聚酰亚胺为例,对激光器运行条件下的喷管温度场进行数值模拟,以验证此种非金属无加热喷管的可行性。结果表明:与金属喷管相比,非金属喷管在不加热保温的情况下能够有效阻止热量传递,防止碘蒸气冷却凝结,满足激光器喷管的使用要求。     

高质量多孔氧化铝模板的制备

在草酸电解液中研究了阳极氧化法制备多孔氧化铝模板(AAO模板)。采用场发射扫描电子显微镜对多孔模板的形貌进行表征,结果表明:模板孔的分布均匀有序,孔径在40~70 nm;电解液浓度、氧化电压、氧化温度和氧化时间都会影响模板的形态;不经过高温退火及抛光也可以制得规则排布的多孔AAO模板。X射线衍射分析表明:氧化铝膜的主要成分为非晶态Al2O3。     

高山仰止,四海闻之——贺马大猷先生九十五岁华诞

<正>2010年3月1日,是国际著名声学家、我国现代声学事业的开创者和奠基者之一、中国科学院资深院士、中国科学院声学研究所研究员、《声学学报》主编马大猷先生95岁华诞,为此,《声学学报》编辑部从先生的部分学生和同事中征集了声学基础和声学应用基础研究方面有代表性的研究论文,专辑出版,以     

Blind convolutive separation method for speech signals via joint block diagonalization

A blind speech source separation method for the overdetermined convolutive mixture model in time-domain is proposed via joint block-diagonalization based on the mutual- independence and short-time stationarity properties of the speech signals. Taking the sum of the F-norms of all off-diagonal sub-matrices as a criterion, a novel joint block-diagonalization method is proposed to estimate the whole mixture matrix through minimizing a sequence of quadratic sub-functions corresponding to mixture sub-matrices. Both theoretical analysis and simulations show that the proposed method has much lower complexity and faster convergence speed than the classical Jacobi-like method with no performance loss. In addition, there are almost no obvious impacts of the channel order and initialization values on the convergence speed.     

光谱成像检测法鉴别中药材

使用基于液晶可调谐滤光器的光谱成像检测系统,对西洋参及市面上常用做假冒西洋参的伪品桔梗进行了在体检测.该系统能对检品进行连续光谱成像,光谱分辨率可达0.5 nm,配合使用Matlab软件对图像信号进行处理和分析.获取了400 nm～680 nm之间的连续荧光光谱图像,通过对比西洋参、桔梗的特征光谱曲线,及进行相关系数的计算,有效地区分了西洋参及桔梗.为西洋参的真伪鉴别提供了一定的帮助.     

强流柱对称相对论电子束的势能与发射度

推导了柱对称相对论电子束在漂移管内的空间电荷势及相互作用势能,分析了势能在束流传输过程中的变化规律,并与束流均方根发射度的变化方程比较。指出一部分势能随束流传输过程中包络振荡而呈现出可逆的变化;而另一部分势能则在束流传输系统及束流本身非线性力的作用下,随着电荷密度分布变化而转为电荷横向热运动能量,从而导致束流归一化发射度的增长,这种转化是一个不可逆的过程。     

等离子体微带开关特性

 提出一种基于微放电等离子体的微带开关。它是以“时变等离子体”取代微带线射频微机电开关的“金属悬臂”,利用等离子体的导体或介质特性使电磁波沿其表面进行传输或截止,从而实现微带线上电磁波传输的动态控制。等离子体微带开关的基本结构包括用以隔断电磁波的微带间隙和产生片状等离子体的放电装置。放电产生时,电磁波因等离子体导体性通过开关,形成“开”状态;放电停止后,电磁波被微带间隙反射,形成“关”状态。利用CST软件仿真研究了等离子体开关特性,结果表明：这种开关的带宽由等离子体密度决定,隔离度由间隙决定,而工作插损与等离子体密度和电子碰撞频率有关。等离子体位形（宽度、厚度等）对于开关性能也非常重要。     

Measurement of Secular Motion Frequency in Miniature Paul Trap to Ascertain the Stability Parameters

40Ca＋ ions are trapped and laser cooled in a miniature Paul trap. The secular motion was observed by the radio-frequency resonance of the ion cloud and Zeeman profile sidebands of a single ion experimentally. The trap stability parameters a and q are determined with an uncertainty under 1% by the secular motion frequency measurement. The trap efficiency is 0.75. A practicable suggestion is given for the benefits of a new trap design.     

Raman Spectrum of Epitaxial Graphene on SiC （0001） by Pulsed Electron Irradiation

We report new Raman features of epitaxial graphene （EG） on Si-face 4H-SiC prepared by pulsed electron irradiation （PEI）. With increasing graphene layers, frequencies of G and 2D peaks show blue-shifts and approach those of bulk highly-oriented pyrolytic graphite. It is indicated that the EG is slightly tension strained and tends to be strain-free. Meanwhile, single Lorentzian line shapes are well fitted to the 2D peaks of EG on SiC（O001） and their full widths at half maximum decrease with the increasing graphene layers, which indicates that the multilayer EG on Si-face can also contain turbostratic stacking by our PEI route instead of only AB Bernal stacking by a traditional thermal annealing method. It is worth noting that the stacking style plays an important role on the charge carrier mobility. Therefore our findings will be a candidate for growing quality graphene with high carrier mobility both on the Si- and C-terminated SiC substrate. Mechanisms behind the features are studied and discussed.