水/有机两相体系中催化氧化反应的研究进展

论述了水／有机两相体系中催化氧化反应的一些最新进展。由于采用水溶性催化剂，使得水／有机两相体系中的催化反应具有催化剂与产物容易分离的优点。阐述了水溶性催化剂在催化氧化反应中的应用，列举了一些典型的水溶性配体、水溶性催化剂以及催化氧化反应实例。参考文献21篇。     

Poly[μ‐aqua‐μ4‐naphthalene‐1,8‐dicarboxylato‐zinc(II)]

In the title complex, [Zn(C₁₂H₆O₄)(H₂O)]_n, a Zn^II polymer based on naphthalene‐1,8‐dicarboxylate (1,8‐nap), the Zn^II atoms adopt an elongated octahedral coordination geometry. A zigzag chain is formed by μ₂‐aqua ligands and μ₂‐carboxylate groups of the 1,8‐nap ligands. Adjacent parallel chains are further linked by 1,8‐nap ligands, forming a twisted two‐dimensional layer structure along the (100) plane.     

十二烷基季铵盐及其与十二烷基硫酸钠混合体系的表面活性

通过表面张力测定，研究了十二烷基季铵盐Ｃ１２Ｈ２５Ｎ（ＣｎＨ２ｎ＋１）３Ｂｒ（ｎ＝１，２，３，４）及其与十二烷基硫酸钠混合体系的表面活性，应用规则溶液理论，计算了混合体系表面吸附层和胶团的组成及分子相互作用参数，对于季铵盐、极性基影响大：ｃｍｃ随ｎ增加而下降，γｃｍｃ则先上升，后下降，自极性基碳链的空间阻碍、疏水、弯曲效应，以及电荷屏蔽效应可对此予以解释，对于混合体系，极性基大小对其表面活性及胶团     

Determination of ethaverine and papaverine using ion-selective electrodes.

Ion-selective poly(vinyl chloride) membrane electrodes for the opium alkaloids papaverine and ethaverine are presented. The electrode membranes contain ion pairs of the alkaloids with the anionic counter ion tetraphenylborate. The detection limits for all electrodes were approximately 2 x 10(-6) mol dm-3 at pH 5.0 in 100 mmol dm-3 buffered solutions and the measured slopes were close to the values theoretically expected. The selectivity coefficient observed for the ethaverine-tetraphenylborate electrode is 10(-1.1) with respect to papaverine. The suitability of the membranes for single-use electrodes is discussed.     

磺化聚苯醚离聚体的溶液性质

研究了磺化度为20.9mol％的磺化聚苯醚(S-PPO)的钠盐和锂盐在四氢呋喃/甲醇混合溶剂中的离聚体行为。S-PPO离聚体在溶液中的链聚集状态与聚合物浓度、阳离子半径密切相关。当Na-SPPO的浓度高于3g/dL时,在30～40℃范围内其聚集度DA与浓度C的关系为:DA=ke~(εc)常数K和β分别表示为与发现链聚集的起始浓度和链聚集速率相关的常数。     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].