Optimization of performance and minimization of silicate interference in continuous flow phosphate analysis

Specific reaction conditions for automated continuous flow analysis of phosphate are optimized in regard to minimizing coating and silicate interference, while maintaining high sensitivity. Use of Sb in the reagent increases sensitivity and yields absorbances with little temperature dependence. Coating can be minimized by using a final solution at a pH>0.5. At final pH of 0.78 there is maximum interference from silicate in the sample. We recommend therefore as an optimal reaction condition with minimal silicate interference, the use of Sb, a final solution pH of 1.00, room temperature for the reaction and a [H(+)]/[Mo] ratio of 70. An equation is provided to correct silicate interference in high precision phosphate determination.     

Highly effective transition structure designed catalyst for the enantio- and position-selective dihydroxylation of polyisoprenoids

[structure: see text] The chiral monocinchona derivative shown, synthesized in one step from two efficiently prepared chiral building blocks, was designed under mechanistic guidance as a catalyst for the enantio- and position-selective dihydroxylation of the terminal isopropylidene group of polyisoprenoids. Its efficacy as a synthetic reagent for this purpose was demonstrated for several different substrates.     

Novel synthesis of 2-oxo-3-butynoates by copper-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride

A general and efficient Cu(I)-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride for the synthesis of 2-oxo-3-butynoates and 2-oxo-3-butynoamides was developed. Readily available starting materials, the mild reaction conditions, wide functional group tolerance, and the obviation of stoichiometric organolithium or magnesium reagents combine to highlight this reaction.     

Structural integration of tellurium oxide into mixed-network-former glasses: connectivity distribution in the system NaPO(3)-TeO(2).

Sodium phosphate tellurite glasses in the system (NaPO(3))(x)(TeO(2))(1-) (x) were prepared and structurally characterized by thermal analysis, vibrational spectroscopy, X-ray photoelectron spectroscopy (XPS) and a variety of complementary solid-state nuclear magnetic resonance (NMR) techniques. Unlike the situation in other mixed-network-former glasses, the interaction between the two network formers tellurium oxide and phosphorus oxide produces no new structural units, and no sharing of the network modifier Na(2)O takes place. The glass structure can be regarded as a network of interlinked metaphosphate-type P(2) tetrahedral and TeO(4/2) antiprismatic units. The combined interpretation of the O 1s XPS data and the (31)P solid-state NMR spectra presents clear quantitative evidence for a nonstatistical connectivity distribution. Rather, the formation of homoatomic P--O--P and Te--O--Te linkages is favored over mixed P--O--Te connectivities. As a consequence of this chemical segregation effect, the spatial sodium distribution is not random, as also indicated by a detailed analysis of (31)P/(23)Na rotational echo double-resonance (REDOR) experiments.     

A general method for the preparation of 4- and 6-azaindoles

Nitropyridines reacted with an excess of vinyl Grignard reagent to produce 4- or 6-azaindoles. Improved yields were obtained when a halogen atom was present at the position alpha to the nitrogen atom in the pyridine ring.     

Spectrofluorimetric determination of cysteine by 5-maleimidyl-2-(m-methylphenyl)benzoxazole

A new thiol weak-fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB), gives a highly fluorescence product in the presence of Cys. In this paper, MMPB has been developed for the fluorimetric determination of cysteine (Cys). At lambda(ex)/lambda(em) = 305.6/425.6 nm, the linear range is from 0 to 3.3 x 10(-7) mol l(-1) and the detection limit (sigma = 3) of 6.2 x 10(-10) mol l(-1). The main advantage of this method lies in the relative high selectivity compared with the methods using other N-substituted maleimide type of thiol reagents, in which 0.15-fold (molar ratio) of GSH is allowed and most of other amino acids at 100-fold (molar ratio) level had no obvious effect on the results. The proposed method has been applied to the determination of Cys in real samples.     

新型重整催化剂的研究—Pt／BaKL型沸石中钡的作用

本文采用XRD,NH_3-TPD,IR以及TEM等方法考察了Pt/BaKL沸石中Ba~(2+)的作用。NH_3-TPD结果表明,交换Ba~(2+)后的L型沸石的酸性,由于阳离子的作用仅在弱酸范围内有些改变,但与载铂的沸石的催化活性无明显的对应关系。IR及XRD谱线表明,BaKL沸石中Ba~(2+)在最佳交换度(26.3%)时,随预培烧温度的提高,使Ba~(2+)处于沸石孔道中B、C、D位置,接近于最佳分布,此时IR谱线上1421cm~(-1)处有一新峰。当沸石负载铂后,因铂与Ba~(2+)的相互作用,新峰消失,导致铂粒在沸石上分布更加均匀;铂粒在1.5—3.0nm之间占有最大比例,使得Pt/BaKL沸石呈现芳构化活性及选择性高于Pt/KL沸石,分别为～98%和～95%。     

二碘化钐还原硫代碳酸酯

在ＳｍＩ＿２－ＨＭＰＡ－ＴＨＦ－ｔ－ＢｕＯＨ体系中，硫代碳酸酯的酰硫键发生还原断裂反应，得到相应的二硫醚产物。     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.     

Fibrous crystalline hydrogels formed from polymers possessing a linear poly(ethyleneimine) backbone

Novel thermoreversible physical hydrogels formed from polymers with linear and star architectures possessing a linear poly(ethyleneimine) (PEI) backbone have been investigated. The hydrogelation occurred simply upon natural cooling of hot aqueous solutions of PEIs to room temperature. The X-ray diffraction and differential scanning calorimetry measurements for the resultant hydrogels unambiguously indicated that the hydrogelation originated from the formation of dihydrate crystalline structures of PEI. These crystalline hydrogels are structurally unique and hierarchical. Microscopic images revealed that the morphologies of the crystalline hydrogels depend on their molecular architectures. The linear PEI resulted in branched fibrous bundles organized by unit crystalline nanofibers with a width of ca. 5-7 nm. The six-armed star with benzene ring core produced fanlike fibrous bundles while the four-armed star with porphyrin core assembled into asterlike aggregates. The critical concentration of gelation (C(G)) was low (about 0.2 approximately 0.3%) and the thermoreversible gel-sol transition temperatures (T(G)) were controllable from approximately 43 to approximately 79 degrees C. The hydrogels formed in the presence of the various aqueous additives including organic solvents, hydrophilic polymers, physical cross-linker, chemical cross-linker, and base enabling modification and functionalization during synthesis. The mechanical properties of the hydrogels could be improved by chemical cross-linking of preformed hydrogels by glutaraldehyde. Physically and physical/chemical cross-linked hydrogels served as excellent template roles in biomimetic silicification, which produced silica-PEI hybrid powder or monolith constructed by nanofibers.