掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Wintner定理的推广与全局光滑线性化

微分方程光滑线性化的研究,目前仅限于原点近傍的小邻域,本文给出了一个全局光滑线性化的结论.全局拓扑线性化或全局光滑线性化的先决条件是任一解的存在区间为全实轴.因此,本文也讨论了Wintner定理的推广问题.     

Nonlinear dynamics of a spinor Bose-Einstein condensate in a double-well potential

We examine the nonlinear dynamical behavior of a spinor Bose-Einstein condensate in a double-well potential. Considering a condensate with large number of atoms, such that it can be described using the mean field theory, we separate the spinor dynamics from the spatial dynamics under the single-mode approximation. We limit ourselves to certain initial conditions under which the spatial mode is frozen so that we can focus on the spinor dynamics only. Identifying collective spin variables of our system, we derive the corresponding nonlinear equations of motion for them. Employing standard stability analysis, we find and characterize fixed points of the system. For a wide range of physical parameters such as tunneling strength and non-linear interactions, as well as for various initial preparations of the system, we identify qualitatively different dynamical regimes possible in the system. In particular, complete and incomplete oscillations of spin variables between quantum wells are found. We also show that by bringing some fixed points close to each other in the phase space of the system, it is possible to induce amplitude modulation to those otherwise regular tunneling oscillations.     

标的股价服从混合过程的期权定价公式及有限元算法

本文将马尔科夫跳跃过程叠加于 Ito过程 ,形成混合过程 ,并用该过程来刻画股价走势情况。而后在标的股价服从混合过程的基础上 ,推导出了欧式看涨期权的定价公式 ,并对美式看跌期权定价给出了有限元算法。     

混杂配体金属簇合物的分子振动光谱与结构

由于原子簇化合物在催化，生物活性，功能材料等方面所呈现的重要性，使其成为无机和物理化学最重要的研究领域之一。文章中和谱学方法对一些具有混配体的过渡金属簇合物的结构及其两者之间的关系进行.     

微微秒超短脉冲的光学压缩

在研究了短光纤(L～L_w)中受激喇曼散射的斯托克斯脉冲对基波脉冲能量箝位效应的基础上进行了脉冲压缩实验。以高泵浦功率(P=1600W)注入长度为8.95m绿光单模光纤中,采用双光程的光栅对压缩结构,并引入空间频率窗口滤除自相位调制光谱的非线性啁啾部分,将40ps的锁模Nd:YAG倍频光脉压缩至<5ps。     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

���ܶȵ�������ģ�������˲��������

用高密度等离子体模型可以计算出一整套输运参数,并且在很宽的等离子体温度和密度范围内有合理的精度,可广泛应用于Z箍缩等离子体、激光聚变和磁约束聚变等领域,并将这个模型计算出的各种输运参数拟合成了实用的公式。     

Crystal and Molecular Structure of OMPCTF

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＯＭＰＣＴＦＷａｎｇＲｕｉ－Ｙａｏ；ＪｉｎＺｈｏｎｇ－Ｓｈｅｎｇ（ＬａｂｏｒａｔｏｒｙｏｆＲａｒｅＥａｒｔｈＣｈｅｍｉｓｔｒｙａｎｄＰｈｙｓｉｃｓ，ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＡ...