Development of a miniature simultaneous MPT spectrometer

An unique miniature simultaneous microwave plasma torch (MPT) atomic emission spectrometer employing linear UV intensified charge-coupled device (ICCD) array detector has been developed and studied preliminarily. The detection limits and precisions of the spectrometer for Ag, Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Sr and V by using different CCD exposure times have been determined. An analysis of a practical sample has been carried out. The preliminary results demonstrate that such simultaneous spectrometer has advantages of saving sample and time, especially suitable for use as detector for chromatography and in combination with flow injection systems. Taking analytical figures of merit and portability into accounts, the miniature simultaneous MPT system will have extended application areas and greater competition potential as compared with commercialized scanning MPT spectrometers.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Comparative molecular field analysis study of stilbene derivatives active against A549 lung carcinoma

A series of 43 stilbene derivatives that showed cytotoxicity against human lung carcinoma (A549) was analyzed using comparative molecular field analysis (CoMFA) for defining the hypothetic pharmacophore model. The polyoxylated stilbenes were found to be active inhibitors of tubulin polymerization. Several cis-stilbenes are structurally similar to combretastatins. However, the trans-stilbenes are assumed to be close to resveratrol found in grapes and have been reported to be potential cancer chemopreventive agents by modulating the initiation, promotion, and progression of the carcinogenic process. With several synthesized compounds that were evaluated for antitumor cytotoxicity against human lung tumor cells (A549), the stilbene derivatives were subjected to CoMFA. To perform systematic molecular modeling of these compounds, a conformational search was carried out based on the precise dihedral angle analysis of the lead compound (1p). The X-ray crystallographic structure of combretastatin A-1 was also used for defining the active conformers of the compounds. After determining the energy-minimized conformers of the lead compound (1p), CoMFA was performed using five different alignments. The three dimensional (3D)-quantitative structure-activity relationship study resulted in reasonable cross-validated, conventional r(2) values equal to 0.640 and 0.958, respectively.     

N—（β—羧丙酰基）异鲁米诺的电致化学发光行为及其机理探讨

本进行了Ｎ－（β－羧丙酰基）异鲁米诺的电致化学发光行为的研究。采用正矩形液脉冲电压，在ＫＯＨ－ＫＣｌ－Ｈ２Ｏ２－（ｐＨ１１．６）介质中，Ｎ－（β－羧丙酰基）异鲁米诺测定的线性范围为４．０×１０＾－１０￣７．０×１０＾－８ｍｏｌ／Ｌ，检出限为２．０×１０＾－１０ｍｏｌ／Ｌ。本对此体系的电致化学发光机理进行了探讨。     

离子色谱法测定水样中氯离子的测量不确定度评定

分析了离子色谱法测定水样中氯离子不确定度的来源,包括标准系列配制引入的不确定度、标准系列浓度-峰面积拟合直线引入的不确定度、样品稀释引入的不确定度,计算了不确定度分量及合成不确定度,扩展不确定度为5.6%。     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

Studies on the thermotropic liquid crystalline polycarbonates. III. Synthesis and properties of fully aromatic liquid crystalline polycarbonates

Four series of fully aromatic thermotropic liquid crystalline polycarbonates were prepared by melt polycondensation from various novel phenylene diphenyl dicarbonates with monomers, such as hydroquinone, methylhydroquinone, chlorohydroquinone, resorcinol, bisphenol A, 4,4′-dihydroxydiphenylsulfone, or phenylhydroquinone, respectively. The thermotropic liquid crystalline properties were studied by polarizing microscope with a heating stage, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). It was found that the nonlinearity of the carbonate group was compensated by resorcinol (1,3-phenylene unit), a bent shape unit. Nematic melts were found for the resulting polycarbonates. © 1993 John Wiley & Sons, Inc.     

The photoluminescence of Co-Al-layered double hydroxide

We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH).It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated.Its excitation spectrum shows a maximum peak near the wavelength 370nm,the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue.This new optical property will be expected to extend the potential applications of LDHs in optical materials field.     

Fibrous crystalline hydrogels formed from polymers possessing a linear poly(ethyleneimine) backbone

Novel thermoreversible physical hydrogels formed from polymers with linear and star architectures possessing a linear poly(ethyleneimine) (PEI) backbone have been investigated. The hydrogelation occurred simply upon natural cooling of hot aqueous solutions of PEIs to room temperature. The X-ray diffraction and differential scanning calorimetry measurements for the resultant hydrogels unambiguously indicated that the hydrogelation originated from the formation of dihydrate crystalline structures of PEI. These crystalline hydrogels are structurally unique and hierarchical. Microscopic images revealed that the morphologies of the crystalline hydrogels depend on their molecular architectures. The linear PEI resulted in branched fibrous bundles organized by unit crystalline nanofibers with a width of ca. 5-7 nm. The six-armed star with benzene ring core produced fanlike fibrous bundles while the four-armed star with porphyrin core assembled into asterlike aggregates. The critical concentration of gelation (C(G)) was low (about 0.2 approximately 0.3%) and the thermoreversible gel-sol transition temperatures (T(G)) were controllable from approximately 43 to approximately 79 degrees C. The hydrogels formed in the presence of the various aqueous additives including organic solvents, hydrophilic polymers, physical cross-linker, chemical cross-linker, and base enabling modification and functionalization during synthesis. The mechanical properties of the hydrogels could be improved by chemical cross-linking of preformed hydrogels by glutaraldehyde. Physically and physical/chemical cross-linked hydrogels served as excellent template roles in biomimetic silicification, which produced silica-PEI hybrid powder or monolith constructed by nanofibers.