以国产微晶纤维素膜作固体基质五种多环芳烃的室温磷光法研究

本文考察了10种国产纤维素膜用于多环芳烃固体基质室温磷光(SS-RTP)的可行性。实验表明:MN-C和MN-P两种型号的微晶纤维素膜用于多环芳烃的SS-RTP是适宜的。阴离子交换纤维素膜、CM-纤维素膜和聚酰胺-6膜也能诱导出多环芳烃的RTP来,但其性能逊于前两种。故本文应用MN-C和MN-P两种微晶纤维素膜基质考察了五种多环芳烃的RTP特征,并建立了它们的SS-RTP新方法。并与用滤纸作基质的实验结果进行了比较,表明两种新的固体基质的RTP性能优于滤纸基质。     

铬（Ⅲ）邻菲咯啉,8—羟基喹啉配合物／Y型分子筛的制备及苯酚催化羟化

制备了铬（Ⅲ）邻菲咯啉，８－羟基喹啉配合物／Ｙ型分子筛，利用元素分析，ＳＥＭ，ＵＶ－ＶｉｓＢＥＴ及ＸＲＤ等方法确定了分子筛选笼中金属配合物的生在及其晶体结构，考察了实验参数对苯酚转化率及产物选择性的影响。     

铜(Ⅰ)配合物[Cu(C8H4O2F3S)(PPh3)2]合成、性质、晶体结构及反应机理的探讨

Reaction of copper powder with 2-thenoyltrifluoroacetone and PPh₃ yielded the complex [Cu(C₈H₄O₂F₃S)(PPh₃)₂], which have been characterized by elemental analysis and IR spectra. The crystal is monoclinic, space group P2₁/n , a=1.0584(1), b=1.6738(1), c=2.2728(9) nm; β =94.22(2); V =4.0152 nm 3; Z=4; D_c=1.299 g·cm^-3; R=0.048, R_W=0.054. Copper (Ⅰ) ion is coordinated by two O and two P atoms forming distorted tetrahedron.     

Cholesterol-based hydrogen-bonded liquid crystals

Hydrogen bonding is a powerful tool for assembling molecules and building new liquid crystalline structures. In this study, non-symmetric dimesogens were prepared by intermolecular hydrogen bonding between rationally designed H-bond donor (3-cholesteryloxycarbonylpentanoic acid) and acceptor (4-(pyridine-4-ylmethyleneimino)phenyl 4-alkoxybenzoate) moieties. Their liquid crystalline properties were investigated by differential scanning calorimetry, polarized optical microscopy and X-ray diffraction. Cholesteric and smectic phases were observed. As for the covalently linked dimesogens, several types of smectic periodicities occur for these H-bonded cholesteryl compounds depending on the molecular parameters.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

Designed nanostructured pt film for electrocatalytic activities by underpotential deposition combined chemical replacement techniques

Multiple-deposited Pt overlayer modified Pt nanoparticle (MD-Pt overlayer/PtNPs) films were deliberately constructed on glassy carbon electrodes through alternately multiple underpotential deposition (UPD) of Ag followed redox replacement reaction by Pt (II) cations. The linear and regular growth of the films characterized by cyclic voltammetry was observed. Atomic force spectroscopy (AFM) provides the surface morphology of the nanostructured Pt films. Rotating disk electrode (RDE) voltammetry and rotating ring-disk electrode (RRDE) voltammetry demonstrate that the MD-Pt overlayer/PtNPs films can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated 0.1 M H(2)SO(4). Thus-prepared Pt films behave as novel nanostructured electrocatalysts for dioxygen reduction and hydrogen evolution reaction (HER) with enhanced electrocatalytic activities, in terms of both reduction peak potential and peak current, when compared to that of the bulk polycrystalline Pt electrode. Additionally, it is noted that after multiple replacement cycles, the electrocatalytic activities improved remarkably, although the increased amount of Pt is very low in comparison to that of pre-modified PtNPs due to the intrinsic feature of the UPD-redox replacement technique. In other words, the electrocatalytic activities could be improved markedly without using very much Pt by the technique of tailoring the catalytic surface. These features may provide an interesting way to produce Pt catalysts with a reliable catalytic performance as well as a reduction in cost.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.