State-to-state reaction dynamics of CH3I photodissociation at 304 nm

The detailed reaction dynamics of CH(3)I photodissociation at 304 nm were studied by using high-resolution long time-delayed core-sampling photofragment translation spectroscopy. The vibrational state distributions of the photofragment, i.e., CH(3), are directly resolved due to the high kinetic resolution of this experiment for the first time. CH(3) radicals produced from I((3)Q(0+)), I((1)Q(1) <--( 3)Q(0+)), and I((3)Q(1)) channels are populated in different vibrational state distributions. The I((3)Q(0+)) and I((3)Q(1)) channels show only progressions in the nu2'(a2") umbrella bending mode, and the I((1)Q(1) <-- (3)Q(0+)) channel shows both progression in the nu2' umbrella bending mode and a small amount of excitation in the nu1'(a1') C-H stretching mode. The photodissociation processes from the vibrational hot band of CH(3)I (upsilon3 = 1, upsilon3 = 2) were also detected, primarily because of the absorption probability from the vibrational excited states, i.e., hot bands are relatively enhanced. Photofragments from the hot bands of CH(3)I show a cold vibrational distribution compared to that from the vibrational ground state of CH(3)I. The I* quantum yield and the curve crossing possibility were also studied for the ground vibrational state of CH(3)I. The potential energy at the curve crossing point was calculated to be 32 790 cm(-1) by using the one-dimensional Landau-Zener model.     

直流放电制备CN自由基及其LIF探测

CN自由基是研究化学反应动力学的典型自由基，CN的动力学行为，如CN＋O2的反应已成为研究自由基－自由基反应的模型体系[1]，同时也在许多实际过程如燃烧过程，星际气体的形成过程中起着重要的作用[2，3]．利用含有CN的化合物进行光解、放电、与亚稳态原子分子进行传能反应是目     

丁基罗丹明B—钼酸盐光度法连续测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，丁基罗丹明Ｂ（ＢＲＢ）分别与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５７０ｎｍ，表面摩尔吸光度分别为εＣｅ＝３．９６×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，εＳｃ＝４．７１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，服从比耳定律范围分别为０－２４μｇ／Ｌ Ｃｅ和０－６０μｇ／ＬＳｃ，测定极限为Ｃｅ１．０μｇ／Ｌ（ｎ＝１２）和Ｓｃ１．９μｇ／Ｌ（ｎ＝１０），对     

Indo study of some cyclic carbenes

INDO calculations, with geometry optimization, have been performed on the cyclic carbenes cyclopropenylidene (I) cyclopropylidene (II), and cyclopentadienylidene (III). It is found that all three systems have a singlet ground state and, due to aromaticity, the triplet-singlet energy separations for I and III are particularly large. In addition, for each system, the electronic structure and its influences on geometry and reactivity are discussed.     

High-pressure silicate pyrochlores,Sc2Si2O7 and In2Si2O7

The silicate compounds Sc₂Si₂O₇ and In₂Si₂O₇ have been converted from thortveitite type to pyrochlore type at 1000°C, 120 kbar, with resulting cell constants of 9.287(3) and 9.413(3) Å, respectively. Invariant reflection intensities in the X-ray powder diffraction patterns allowed precise absorption corrections to be made, and refinement of thermal parameters and of the single structural parameter x gave values of 0.4313(21) and 0.4272(15), respectively. The corresponding six-coordinate SiO distances were 1.761(7) and 1.800(5) Å, and the average eight-coordinate distances for ScO₈ and InO₈ were 2.267 and 2.275 Å. Values of structure-refined bond lengths for compounds containing six-coordinate silicon are surveyed, and overall weighted average octahedral distances of 1.782(14) Å for SiO and 2.520(18) Å for OO are derived. Pyrochlore phases were not produced from rare-earth disilicate or monosilicate phases subjected to the same reaction conditions as the Sc and In compounds.     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

表面活性剂与金属离子的相互作用

烷基硫酸盐(CnS)的抗盐能力很差,在其中引进氧乙烯基(Eo)以后,形成的烷基聚氧乙烯基醚硫酸盐(CnEnS)的抗盐能力明显增强。把CnEnS加到CnS中,形成混合表面活性剂的低温抗盐能力也将明显改善。Doscher、Schott等人认为,CnEnS中的Eo与高价金属阳离子形成了一种“复合物”,这使得CnEnS具有很强的抗盐能力。Chiu则没有发现这种“复合物”。显然,了解CnEmS的抗盐机理,对于该类表面活性剂的理论研究和实际应用,都有重要的意义。     

镀金层识别及其厚度测定的X—荧光强度比值法

利用Ａｕ原子在Ｘ射线激发下所发射的Ｌβ线和Ｍ线的强度比值识别样品是镀金还是Ｋ金，同时利用这个比值测定镀金层的厚度，镀金层厚度的测定范围为０～４μｍ，测定值与标定值的相对误差小于１５％。     

Ni^2—交换蒙脱石中的镍物种及焙烧温度影响研究

对一组自制Ｎｉ＾２＋交换蒙脱石样品中镍物种的存在在形及焙烧温度影响进行了ＴＰＲ和ＸＲＤ考察结果表明，样品中镍负载量等于或小于Ｎｉ＾２＋的交换量时，镍主要以难还原听可交换性阳离子Ｎｉ（ＯＨ）＾ｑ＋ｘ和易还原的自由态镍Ｎｉ（ＯＨ）２或ＮｉＯ两种形式存在。