On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

Temperature modulated DSC study of the kinetics of free radical isothermal network polymerization

Temperature modulated differential scanning calorimetry (TMDSC) is used to study the kinetics of the free radical isothermal polymerization of triethyleneglycol dimethacrylate (TEGDMA). Azo-bis-isobutironitrile was used as initiator. The polymerization’s temperature is lower than the final glass transition temperature of the polymer network. The measurement of the average heat flow released and the heat capacity during the reaction allows identifying the different stages of the reaction. The presence of double peaks in the heat flow is ascribed to the autoacceleration. The influence of temperature, measuring conditions and oxygen are described. Vitrification is detected by the drop in heat capacity. It occurs at increasing conversion rates for increasing temperatures. After vitrification, the diffusion-controlled reaction continues.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

A potentiometric DNA sensor for determining autoimmune antibodies to DNA

A new technique is proposed for detecting interactions between DNA and DNA autoimmune antibodies using a potentiometric sensor based on a glassy-carbon electrode modified with polyaniline and native DNA from chicken erythrocytes. It is shown that the DNA-antibody interaction changes the rate of polyaniline doping in transferring the DNA sensor from an alkaline (pH 7.5) solution, which is optimum for the immunochemical reaction, to an acidic (pH 3.0) solution. The dynamics of the variation of the DNA sensor potential depends on the titer of antibodies and their origin. The dependence of the DNA sensor signal on the dilution of the blood sera from systemic lupus erythematosus and autoimmune thyroiditis patients shows that DNA antibodies can be diagnosed by the characteristic maximum in the dilution curve found in the range of serum dilutions from 1: 20 to 1: 50.     

Spectral Properties of Thioflavin T and Its Complexes with Amyloid Fibrils

Comparative analysis of the absorption and fluorescence spectra and fluorescence excitation spectra of thioflavin T (ThT) in various solvents and in the composition of amyloid fibrils has shown that ThT, when excited in the region of the long-wavelength absorption band, fluoresces in the spectral region with a maximum at 478–484 nm. The appearance in aqueous and alcohol solutions of a fluorescence band with a maximum near 440 nm has been attributed to the presence in the composition of the ThT preparations of an impurity with an absorption band in the 340–350-nm range. The literature data showing that in glycerol ThT has a wide fluorescence spectrum with two maxima are due to the artifact connected with the use of a high concentration of the dye. It has been suggested that the cause of the low quantum yield of ThT aqueous and alcohol solutions is the breakage of the system of conjugated bonds due to the reorientation of the benzothiozole and benzaminic rings of ThT in the excited state with respect to one another. The main factor determining the high quantum yield of fluorescence of ThT incorporated in fibrils is the steric restriction of the rotation of the rings about one another under these conditions. The suggestions made have been verified by the quantum-chemical calculation of the ThT molecule geometry in the ground and excited states.     

Imaging mitochondrial organization in living primate oocytes and embryos using multiphoton microscopy.

We employed multiphoton laser scanning microscopy (MPLSM) to image changes in mitochondrial distribution in living rhesus monkey embryos. This method of imaging does not impair development; thus, the same specimen can be visualized multiple times at various developmental stages. Not only does this increase the amount of information that can be gathered on a single specimen but it permits the correlation of early events with subsequent development in the same specimen. Here we demonstrate the utility of MPLSM for determining changes in mitochondrial organization at various developmental stages and show that rhesus zygotes possess a distinct accumulation of mitochondria between the pronuclei prior to syngamy. We present evidence that suggests that this pronuclear accumulation may be positively correlated with development to the blastocyst stage-in the same embryo-thereby illustrating how MPLSM can be used to correlate cellular dynamics of primate oocytes and early embryos with their developmental potential. Understanding the relationship between mitochondrial distribution and the subsequent development of mammalian embryos, particularly primates, will increase our ability to improve embryo culture technologies, including those used for human assisted reproduction.     

HfO2/AlGaN/GaN structures with HfO2 deposited at ultra low pressure using an e‐beam

We show that HfO₂/AlGaN/GaN structures with HfO₂ layer deposited using an e‐beam in ultra high vacuum are suitable for field effect transistors. The dielectric constant of the HfO₂ was found ε_HfO > 23–24, which is close to the highest re‐ ported values for this material. The leakage current did not exceed 10^–4 A/cm² at the threshold voltage. The comparison of the losses in the samples with and without HfO₂ indicates low concentration of the interface traps. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Constructing Space for Science at the Royal Institution of Great Britain

Those who have worked in the Royal Institution of Great Britain have, since its foundation in 1799, made significant contributions to scientific knowledge, to its practical application, and to its communication to a wide variety of audiences. Such work cannot be carried out in an architectural vacuum, and in this paper we examine how the buildings of the Royal Institution, 20 and 21 Albemarle Street in central London, have shaped the work undertaken within its walls and how, on a number of occasions, the buildings have been reconfigured to take account of the evolving needs of scientific research and communication. This paper is based on the Conservation Plan of the Royal Institution that we wrote during 2003. The Conservation Plan did not examine the land owned by the Royal Institution to the north (i.e., 22 and 23 Albemarle Street; for this area see Richard Garnier, “Grafton Street, Mayfair,” Georgian Group Journal 13 (2003), 210–272), but it did discuss 18 and 19 Albemarle Street. In this paper we concentrate on the core Royal Institution buildings at 20 and 21 Albemarle Street. Other studies of the relationship of architecture,space, and science include Crosbie Smith and Jon Agar, ed., Making Space for Science: Territorial Themes in the Shaping of Knowledge (Basingstoke: Macmillan, 1997); Peter Galison and Emily Thompson, ed., The Architecture of Science (Cambridge, Mass.: MIT Press, 1999); and Sophie Forgan,“The architecture of science and the idea of a university,” Studies in History and Philosophy of Science 20 (1989), 405–434. Frank A.J.L. James is Professor of the History of Science at the Royal Institution; he has written widely on the history of nineteenth-century science in its social and cultural contexts and is editor of the Correspondence of Michael Faraday. He is President of the British Society for the History of Science. Anthony Peers is an Associate of Rodney Melville and Partners where he works in the field of building conservation as an architectural historian. He is a Council member of the Ancient Monument Society.