Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

Theoretical and experimental investigation of the linear optical response of YBa2Cu4O8 The relevance of LDA calculations

We report results of ellipsometric measurements of the dielectric tensor of YBa₂Cu₄O₈ as well as calculations employing density functional theory in the local density approximation (LDA). For the computation of the one-electron eigenvalues and states the linear-muffin-tin-orbital method (LMTO) was used. Measured and calculated results show good agreement. In particular, the calculation predicts different band structures for YBa₂Cu₃O₇ and YBa₂Cu₄O₈ in the vicinity of the Fermi energy which lead to significant differences in the optical spectra. One such difference is a region of small ε₂ in the near infrared which is a fingerprint of the high (relative to the top of the highest fully occupied band) Fermi energy as compared to the situation in YBa₂Cu₃O₇. Our experimental results confirm the theoretical findings.     

Microwave reflection properties of grooved metallic mirrors

Maxwell's equations are solved using finite difference equations to obtain the near and the far field distribution of electromagnetic waves in front of corrugated mirrors. We treat the case of perpendicular incidence to obtain both the phaseshift between TE- and TM-modes in polarisation twisters and mode converters as well as the amplitude of the electromagnetic field.     

The kinetics of the (5 × 20) → (1 × 1) structural transition for Au(100)

The kinetics of the anion-induced (5 × 20) → (1 × 1) surface structural transition of reconstructed Au(100) electrodes was studied in sulfate-containing solutions by current transients. It is shown that lifting of the reconstruction follows a nucleation-and-growth type behavior which can be described by the Avrami equation. Moreover, for high positive potentials, i.e., high anion coverages, the current-transient analysis reveals instantaneous nucleation, whereas for low transition overpotentials and long transition times a mechanism with constant transition rate prevails. Apparent activation energies, which depend strongly on the electrode potential, are derived from the temperature dependence of the Avrami plots.     

Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

Adaptation of an echelle spectrograph to a large CCD detector

A broad range echelle spectrograph with a CCD matrix detector is developed for different applications in atomic spectroscopy. The compact optical design in combination with a dispersive entrance slit illumination offers a low stray light level and high throughput in the UV spectral region comparable only with spectrographs of higher focal length. Ray tracing calculations for typical wavelengths and the multi-line spectrum of an iron arc show the excellent overall spectrum quality. The subtraction of two partial spectra of different steel alloys demonstrates the spectra evaluation possibilities of the CCD spectrograph.     

Analysis and implementation of cross sync period underwater acoustical positioning techniques for underwater targets

I.IlltroductionWhenanactiveunderwateracousticalpositioningsystemissearchingforanunderwatertarget,itisnecessaryforittocompleteatransmittingandreceivingcycIewithineachworkingperiodinordertofindoutthelocationofthetargetcorrectly.Forexample,whenanunder-wateracoustica1synchronouspositioningsystemistrackinganunderwatertargetwithagivensynchr0nizingperiod,thepropagati0ntimeofthepositioningsignaltravellingfr0mthetaJrgettothearrayofthesystemshouldbelessthanthesynchronizingperiod0therwisetargetdis-tance…     

TLC-screening of important pharmaceutical substances using fluorescence detection

Summary Observation of fluorescence reactions on TLC plates is a valuable additional tool within the scope of screening procedures for many toxicologically relevant substances commonly encountered in clinical- and forensic-toxicological analysis. The reactions are based on native fluorescence without any treatment and on reactions obtained with an approved derivatization procedure. Due to the enormous sensitivity of the fluorescence detection, the method is also applicable to very low concentrations and small amounts of biological materials. The procedures described in this article have proven their high pragmatic usefulness in many practical cases.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday