Surface analytical characterization of oxide-free Si(100) wafer surfaces

Summary Wet-chemical cleaning procedures of Si(100) wafers are surface analytically characterized and compared. Hydrophobic surfaces show considerably less native oxides in comparison to hydrophilic surfaces.The growth of the oxide is determined as a function of exposure to air by means of XPS measurements. The chemically shifted Si2p XPS signal is utilized for the quantification of the growth kinetics.One hour after cleaning no chemically shifted Si2p XPS peak is discernible on the hydrophobic surfaces. Assuming homogeneous oxide growth, the detection limit of native oxides is estimated to be below 0.05 nm using an emission angle of 18° with respect to the wafer surface. The calculation of the oxide thickness from the chemically shifted and nonchemically shifted Si2p XPS peak intensities is carried out according to Finster and Schulze [1]. For more than a day after cleaning no surface oxides can be identified on the hydrophobic surfaces. The oxide growth kinetics is logarithmic. The very slow oxidation rate cannot be attributed to fluorine residues since no fluorine is seen by XPS. We explain the slow oxidation rate by a homogeneous hydrogen saturated Si(100) wafer surface.

---

Oberflächenanalytische Charakterisierung oxidfreier Si(100)-Waferoberflächen

     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Observation of hydrogen induced intermediate borides in PrFeB based alloys by Mössbauer effect spectroscopy

In the present work, a quantitative analysis of the phase compositions by Mössbauer effect spectroscopy of solid and conventional hydrogen disproportionated Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys was carried out. Significant amounts of intermediate borides t-Fe₃B and Pr(Fe, Co)₁₂B₆ were detected after solid hydrogen disproportionation treatment in Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys, respectively. After conventional hydrogenation–disproportionation–desorption–recombination treatment these phases were not detected and in no case residual Pr₂Fe₁₄B-phase was found. It was observed that the amount of intermediate borides after disproportionation can be correlated with the degree of texture after recombination at various temperatures.     

VO2-Based Infrared Microbolometer Array

V0₂-based thin film materials on silicon substrates are fabricated by ion beam sputtering and a post-annealing which is different from the conventional fabricating method. An infrared linear microbolometer array with 128 pixels is prepared using as-deposited vanadium dioxide thin films. Optical and electrical properties for V0₂-based microbolometer array are tested.     

Spectral Representation Theory for Dielectric Behavior of Nonspherical Cell Suspensions

Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, while the high-frequency one was independent of it. The cell shape effect was simulated by an ellipsoidal cell model but the comparison between theory and experiment was far from being satisfactory. Prompted by the discrepancy, we proposed the use of spectral representation to analyze more realistic cell models. We adopted a shell-spheroidal model to analyze the effects of the cell membrane. It is found that the dielectric property of the cell membrane has only a minor effect on the dispersion magnitude ratio and the characteristic frequency ratio. We further included the effect of rotation of dipole induced by an external electric field, and solved the dipole-rotation spheroidal model in the spectral representation.Good agreement between theory and experiment has been obtained.     

Account of Thermal Flow Through Metal-Semimetal BiSb Contact Boundary for Determination of EHF Detector Volt-Watt Sensitivity

Bismuth, antimony and its alloys are the typical representatives of a class of semimetals, which electric conductance is lower in 10²-10³ times, than of usual well conducting an electrical current metals. The alloys bismuth with antimony have semi-conductor properties in wide area of compositions at temperatures below 77 °K. The semimetals are rather perspective materials from the point of view of their probable application in various devices [1,2,3].In present time the semimetal alloys BiSb have wide application in thermoelectric generators and refrigerators. In work [3] the opportunity of use of semimetals BiSb with percentage content of Bi and Sb from 8 % up to 25 % was shown as high-sensitivity and of small inertion indicators of the mm range radiation where thermoelectric effect is used. The principle of action of such indicators is based on occurrence of temperature gradient in a semimetal crystal BiSb that has two contacts of the various area with flowing electrical current. Basic element of such device is the dot contact metal - semimetal. One of the main characteristics is volt-watt sensitivity of metal-semimetal BiSb contact which calculating is shown in present work.     

Effects of stenosis on arterial rheology through a mathematical model

The paper presents an analytical study of blood flow through a stenosed artery using a suitable mathematical model. The artery is modelled as an anisotropic viscoelastic cylindrical tube containing a non-Newtonian viscous incompressible fluid representing blood. The blood flow is assumed to be characterized by the Herschel–Bulkley model. The effect of the surrounding connective tissues on the motion of the arterial wall has been incorporated. Initially, the relevant solutions of the boundary value problem are obtained in the Laplace transform space, through the use of a suitable finite difference technique. Laplace inversion is carried out by employing suitable numerical techniques. Finally, the variations of the vascular wall displacements, the velocity distribution of the blood flow, the flux, the resistance to flow and the wall shear stress in the stenotic region are quantified through numerical computations and presented graphically.