GaN基低色温高显色白光LED

采用440nm短波长InGaN/GaN基蓝光LED芯片激发高效红、绿荧光粉制得高显色性白光LFD,研究了不同胶粉配比对LED发光性能的影响,结果表明,A胶、B胶、绿粉、红粉比重在0.5∶0.5∶0.2∶0.03时,在440 m蓝光激发下呈现了有两个谱带组成的发光光谱,分别是峰值为535 nm的特征光谱和643nm的特征光谱,胶粉通过均匀调配后能够有效的进行混光产生低色温白光,实验中最低色温可达3 251K,显色指数高达88.8,这比传统蓝光激发YAG荧光粉制得的白光LED色温更低,显色指数提高了26%.     

Self-adaptive modal control for time-varying structures

For the past several years, modal controllers are widely studied and used in the field of vibration or vibro-acoustics control. They are efficient but not robust, because these methods involve a reconstructor based on a modal truncation. When the dynamic behavior of the structure change, the controller and reconstructor must be updated to cope with the changes in the structure behavior, in order to maintain both performance and robustness. A solution is adaptive control but this approach needs some specific information not generally available particularly in the case of undergone modifications. This paper deals with a self-adaptive modal control based on a real-time identifier, which avoid the need of specific information. The identifier permits to update the controller and the reconstructor according to the changes of modal characteristics of time-varying structures. A classical algorithm of identification is used to obtain a state space model with an unspecified state vector. Then, based on this model, a well adapted transformation is carried out to get the modal characteristics from the expression of complex modes, including the mode shapes. As a criterion of running identification, the value of “variance-accounted for” (VAF) is employed to carry out the identifier only when the initial or previous model is not enough exact. A Linear Quadratic Gaussian Algorithm is employed in such a way that the controller and observer can be optimized according to the updated modal model. By this way, a self-adaptive modal control is completed and can demonstrate some smart properties. The proposed methodology is carried out on a simple but representative time-varying mechanical discrete structure. An inertia modification leads not only to low modal frequency shifts but also to inversion of a mode shape which is shown to lead to unstable configuration when control system is not updated. The overall procedure will be described through simulations and performed for different operating conditions, which will prove that mode shapes have to be precisely determined and updated in the controller and observer to guarantee a robust modal control with high performance in spite of the changes of structure.     

Characteristics analysis of hybrid plasmonic waveguide for low-loss lightwave guiding

It has been experimentally demonstrated that a low-loss guided hybrid mode is supported if a metal strip is embedded in a low index polymer layer surrounded by two high index slabs. In this paper, further numerical analyses on the guided hybrid modes are reported to fully elucidate the characteristics of the hybrid plasmonic waveguide. For a one-dimensional slab structure with a metal film of infinite width, simulation results exhibit that low-loss guided hybrid modes are associated with surface plasmon modes and dual dielectric slab modes. The optical properties of the guided modes are improved by increasing the field intensity which is confined into lossless dielectric layers by decreasing the metal film thickness and increasing the refractive index and thickness of the high-index slabs. The finite element method is used to investigate the lateral mode confinement of the optical guided modes by the corresponding metal strip. By reducing the metal film width, the guided modes are confined in the plane transverse to the direction of propagation and the characteristics are significantly improved. The hybrid plasmonic waveguide can be exploited for long-range propagation-based application such as optical interconnection.     

固相反应法制备的Gd0.7Sr0.3MnO3粉末的磁学特性

利用固相反应法制备了用Sr部分替换GdMnO3中Gd的锰基钙钛矿氧化物Gd0.7Sr0.3MnO3.X射线衍射表明其晶体结构为正交晶系,空间群为Pnma.通过测量样品在零场冷却和加场冷却下的磁化强度及磁化率随温度的变化曲线,得出样品显示亚铁磁特性,Mn和Gd两个子晶格相互反平行.根据居里-外斯定律得知其居里温度为61 ...     

碳酸铯修饰Al作为反射阴极的倒置顶发射OLED器件

以Cs₂CO₃修饰的Al电极作为反射阴极制备了高效倒置顶发射结构有机电致发光器件(ITOLED)。以八羟基喹啉铝(Alq₃)作为发光层、MoO₃修饰的Ag为半透明阳极时,器件的开启电压为3.6 V,发光效率和功率效率分别达到9.8 cd/A和3.4 lm/W。研究结果表明,Al/Cs₂CO₃为反射阴极的器件性能明显高于使用Mg:Ag(4.2 V,8.6 cd/A,2.85 lm/W)和Al(5 V,5.5 cd/A,1.57 lm/W)作为反射阴极的倒置顶发射OLED器件。单电子器件研究结果证明,以Cs₂CO₃修饰的Al电极功函数明显低于Mg:Ag和Al电极,具有更好的电子注入效果。因此,除去微腔效应外,Al/Cs₂CO₃为反射电极的ITOLED器件性能的提高主要归因于Al/Cs₂CO₃阴极的有效电子注入。     

非高斯噪声激励下FitzHugh-Nagumo神经元系统的随机共振

研究了乘性非高斯噪声和加性高斯白噪声共同激励下FitzHugh-Nagumo(FHN) 神经元系统的随机共振问题. 利用路径积分法和两态模型理论, 推导出系统信噪比的表达式. 研究结果表明: 系统参数在不同的取值条件下, FHN神经元模型出现了随机共振和双重随机共振现象. 此外, 非高斯参数q在不同的取值条件下, 乘性噪声强度和加性噪声强度对信噪比的影响是不同的. 非高斯噪声的加入有利于增强FHN神经元系统的信号响应.     

金纳米球壳对的局域表面等离激元共振特性分析

应用有限元方法, 研究金纳米球壳对的几何结构参数及物理参量对其表面等离激元共振的散射及消光光谱的影响, 并根据等离激元杂化理论进行了理论分析. 结果表明, 随着金壳厚度的增加, 金纳米球壳对的散射及消光共振峰先发生蓝移而后红移, 而随着金纳米球壳间隙的减小, 或者随着金纳米球壳的内核尺寸或内核介质折射率的增大, 散射及消光共振峰均发生红移; 随着金壳厚度或内核尺寸减小, 或者随着内核介质折射率增大, 金纳米球壳对的散射与消光共振强度减弱, 而随着金壳间隙的减小, 金纳米球壳对的散射共振强度先增强后减弱, 而消光共振强度逐渐增强, 数值模拟与理论分析一致.     

扇形多注强流相对论电子束的产生与传输研究

多注相对论速调管相对于常规相对论速调管, 每注电子束具有更低的导流系数和更低的空间电荷力, 却具有更高的束波转换效率. 本文基于这方面的需求, 通过三维软件模拟与实验研究了扇形多注强流相对论电子束的产生与传输. 通过建立电子枪的三维模型, 分析了阴极端面静电场的分布及其对电子束产生的影响; 通过粒子模拟获得了发射束流, 然后通过粒子跟踪仿真, 得到了电子束在空心漂移管和多扇形孔漂移管中传输的束斑图, 并对其进行了理论分析与解释. 模拟和实验结果表明, 电子束在空心漂移管传输过程中不仅绕束自身中心旋转, 还绕系统的中心旋转, 通过旋转多扇形孔漂移管实现对中的方法可提高传输效率.     

Transport properties and magnetoresistance in La0.8Te0.2MnO3/ZrO2 composites

The transport properties and magnetoresistance of electron-doped manganate / insulator composites (La_0.8Te_0.2MnO₃)_{1 - x}/(ZrO₂)_x (x=0, 0.3, and 0.5) are investigated. It is found that the metal-insulator transition temperature of this system shifts to a lower value as the ZrO₂ content increases. The introduction of ZrO₂ enhances both the domain scattering and electron relative scattering in the metal transport region. In the adiabatic small polaron hopping transport region, the thermal activation energy seems invariable regardless of the ZrO₂ content. The application of a magnetic field promotes the charge transportation capabilities of the composites, and the magnetoresistance is enhanced with an increase of the ZrO₂ content. This could be attributed to the more remarkable modification effect of magnetic field on ordering degree in the composites than in pure La_0.8Te_0.2MnO₃.     

Ultrahigh sensitivity electric field detection with a liquid electro-optical film

In this Letter, an electro-optical probe configuration with polar molecule liquids as the sensing film is proposed to improve the voltage sensitivity. This method exhibited increases in intrinsic sensitivities better than 0.1 mV/√Hz, 2 orders of magnitude larger than the normal method using a GaAs probe in the same measurement system. Based on the mechanism of orientation polarization, the electro-optic coefficient was measured to be 250 pm/V by the Teng-Man method at a modulation field of 100 Hz. This technology will be promising in applications of low-frequency field detection.