脉冲功率晶闸管反向恢复特性

为建立有效的晶闸管模型来仿真晶闸管关断时过电压,减小晶闸管过压损坏的概率,以最大通流150 kA、耐压5.2 kV的脉冲晶闸管为研究对象,将其前置于脉冲形成单元回路中作为大功率开关使用,记录放电过程中晶闸管两端电压及电流。实验数据表明：恢复过程中的电流下降率、反向恢复电荷、反向恢复电流峰值随通态电流峰值的增大而增大,晶闸管关断时间随通态电流峰值的增大而减小。此外,在关断过程中,当电流下降率在-50~1000 A/s时,电流下降率与电流峰值为线性关系。因此,在大脉冲电流条件下,推导反向恢复过程参数与通态电流参数的关系时电流下降率可用与电流峰值的线性关系代替。基于Matlab仿真平台,建立了具有反向恢复过程的脉冲晶闸管模型。该模型仿真得到的晶闸管反向恢复电流峰值与实测结果较为吻合,反向恢复电压尚待进一步修正。     

基于几何差异的目标识别算法

为降低目标识别算法复杂性且提高其抗噪能力,提出一种基于几何特征差异的目标识别算法。将获取到的目标图片经图像处理后提取轮廓,并以最小周长多边形算法构造目标轮廓的近似多边形;然后根据模板库标准目标做放大或缩小处理后使其面积与模板面积相等;再使用摆放算法使其与模板库图形部分重合;并提出一种改进型双向链表算法求多边形相交部分,通过计算相交部分面积大小达到识别图像的目的。经过仿真实验验证了此方法简单易行,能够快速识别目标。     

Excitation dependent quenching of luminescence in LED phosphors

Droop, the decrease of efficiency with increased power density, became a major topic with InGaN LEDs, after its introduction in 2007. This paper provides insight into droop in localized center luminescence phosphors, exemplified here by Eu²⁺ doped materials. This topic is of increasing importance, as high brightness blue LEDs have reached outputs >1 W/mm². The nonlinearities in phosphor quantum efficiency result in drive‐dependent color point shift and reduction of overall efficiency of phosphor converted white LEDs which utilize Eu²⁺ activated phosphors. The efficiency quenching can be traced back to two processes, well‐known in laser physics, excited state absorption or/and cross relaxation by Foerster/Dexter transfer. Both processes lead to reduction in phosphor efficiency, but they can be differentiated. Understanding the root cause of efficiency quenching opens ways to minimize the practical consequences. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

含甲缩醛柴油喷雾和燃烧排放特性的试验研究

应用激光相位多普勒技术测量了含甲缩醛柴油喷雾的速度场和粒径场,在直喷式柴油机上研究了该含氧混合燃油的燃烧排放特性。结果表明,添加甲缩醛可改善柴油的雾化,增加喷雾轴线上的粒子速度,但减小喷雾锥角;同时以远大于其加入的比例降低柴油机排气烟度,但对氮氧化物的排放影响不大。柴油机采用甲缩醛作燃油添加剂时,需改造燃油系统。     

变耦合系数非线性三波导定向耦合器特性研究

报道了对高斯型及指数型变耦合系数三波导耦合器的一些重要的全光开关特性进行的研究。利用四阶龙格一库塔方法对指数型和高斯型两类变耦合系数三波导耦合器进行了数值计算。数值计算结果表明：对于变耦合系数三波导耦合器而言,功率可在波导1与波导3之间100％转换,而波导2则不可能达到100％的功率输出。与双波导变耦合系数耦合器相比,在相同的最大耦合系数情况下三波导变耦合系数耦合器开关曲线要更陡一些．即具有更好的开关特性。与平行三波导耦合器相比,变耦合系数三波导耦合器作为光开关的最大优点在于开关曲线中不存在振荡。     

微接触印刷法制造聚合物多层次准三维立体微结构

直接用聚合物稀溶液作为“印墨”进行微接触印刷,制作了诸如聚苯乙烯和聚甲基丙烯酸甲酯等聚合物的微细结构,通过重复交叉盖印得到多层次准三维立体微结构,并用可聚合的双(甲苯磺酸)-2,4-己二炔-1,6-二醇脂的丙酮稀溶液作微接触印刷,观察了微条纹上的聚合.对聚合物溶液的微接触印刷的过程中溶剂挥发等因素的影响进行了观察分析,结果表明,溶剂挥发时间对微图形的准确复制是十分重要的,过长或过短的溶剂挥发时间都不利于得到清晰精确的微结构.     

丁酮分子内价轨道1a″的电子动量谱学研究

用高分辨率电子动量谱仪进行丁酮分子的结合能谱和内价轨道1a″电子动量谱的实验工作，以及用Hartree-Fock和密度泛函理论方法对1a″轨道电子动量谱的理论研究. 得到了各价轨道的电离能值以及理论计算的总能、偶极矩和1a″轨道的二维密度图. 并比较了内价轨道1a″的电子动量谱的实验和理论计算结果，实验结果与理论计算符合较好.     

Graphitization of activated carbon under high pressures and high temperatures

Activated carbon was treated at 5.0 GPa up to 1600 ^°C and the structural evolution in the graphitization process was investigated. The graphitization temperature is reduced to 1200 ^°C at 5 GPa, as reflected by x-ray diffraction patterns. Honeycomb-like structures come into being in the high-pressure sintering temperature range of 1000–1100 ^°C and slice-like structures appear after graphitization. Raman frequency and half width drop drastically near the graphitization temperature, and the appearance of D and D′ lines indicates there are still some disorder structures in the graphitized activated carbon.