硒与消化系统癌关系的探讨

据不同地貌、地质条件在30个县市按剖面、同步、随机取土壤样品372份．测定硒等微量元素含量．作等级相关分析显示。土壤硒含量与消化系统癌呈负相关关系．作相对危险度、剂量-效应及多因素分析,认为此负相关关系并非偶然现象．     

分光光度法研究镧与间乙酰基偶氮氯膦(CPAmA)配合物的形成反应

本文用分光光度法研究了间乙酰基偶氮氯膦试剂在水溶液中的离解作用和质子化作用;镧与间乙酰基偶氮氯膦配合物的组成和β型配合物形成反应的条件和动力学特征,并测定了α型配合物的积累稳定常数     

Voltammetric determination of trace amounts of gold(III) with a carbon paste electrode modified with chelating resin

A carbon paste electrode modified with chelating resin (ammino-isopropylmercaptan-type cross-linked chelating resins) for the voltammetric determination of gold(III) was characterized by cyclic voltammetry. The gold(III) ion is accumulated on the surface of the modified electrode only by the chelating effect of the modifier in the carbon paste, without application of a potential. After exchange of the medium the accumulated amount of gold(III) is determined by voltammetry in a blank electrolyte solution. The response depends on both the concentration of gold and the accumulation time. For a 5-min preconcentration time, a linear calibration graph was obtained in the range 3 × 10^?8-1 × 10^?6 M and the detection limit was about 1 × 10^?8 M. A combination of chemical and electrochemical renewal allows the use of a single modified electrode in multiple analytical determinations over several days. For ten preconcentration—determination—renewal cycles [2 × 10^?7 M Au(III)], the response could be reproduced with 4.7% relative standard deviation. Many parameters such as the composition of the paste and pH influence the response of the measurement. Many other metal ions have no or little effect on the determination of gold. The procedure was applied to the determination of gold in minerals, copper and anode mud, with good results.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

Core/shell nanocomposite based on the local polarization and its electrorheological behavior

Aimed at the increase of electrorheological effect, a novel core/shell material was prepared by the combination of mechanochemical activity and sol-gel technique. The structure analyses X-ray diffraction, Fourier transform infrared spectrometry, scanning electron microscopy, and energy-dispersive spectrometry showed that a modified kaolinite/titanium oxide nanocomposite consisted of the mechanochemically activated kaolinite/NaCl complex coated by titanium oxide. A distinct enhancement of the electrorheological activity was found by using such particles dispersed in silicone oil than those of kaolinite or titanium oxide alone under a direct current electric field. Modified kaolinite/titanium oxide electrorheological fluid has a larger dielectric constant enhancement deltaepsilon', and a strong interfacial polarization occurs with a clear dielectric loss peak around 2 kHz. Doping NaCl into the core (kaolinite) by the mechanochemical activation and limiting the transferring of the ions by the shell (titanium oxide) may increase the interfacial polarizability of particles and induce a high electrorheological effect.     

A simple route towards tubular ZnO

Thermal treatment of Zn(NH3)(4)2+ precursor in ethanol solvent led to the formation of the tubular ZnO which exhibited strong ultraviolet photoluminescence around 385 nm at room temperature; TEM images showed the hollow tubules with approximately 450 nm in diameter and approximately 4 microns in length were built up by ZnO polycrystals.     

Bis[1,1′‐bis(diphenylphosphino)ferrocenium] hexadecachlorotetraantimony(III) ethanol solvate

In the title compound, [Fe(C₁₇H₁₄P)₂]₂[Sb₄Cl₁₆]·C₂H₆O, the Fe atoms lie on inversion centres and the pairs of cyclopentadienyl rings are consequently in a fully staggered conformation. The centrosymmetric anionic clusters formed by [Sb₄Cl₁₆]^4? are surrounded by the cations and are held together by weak C—H?Cl interactions. These formations stack along the a axis to form columns, and the columns are interconnected by another weak C—H?Cl interaction along the b axis.     

A Theoretical Study on the Conductivity of Carbon Doped BNNT

From the changes in energy band, density of state (DOS) and electronic structure calculated by the DFT/B3LYP method, the conductivity of carbon doped boron‐nitride nanotube (BNNT), which is formed by C‐C bond substituting B‐N bond, was discussed. The results indicate that the substitution will strengthen the conductivity of the tube, and its semi‐conductivity might be adjusted by controlling the substitution.     

Theoretical study of reaction channels for the weakly bound complex systems created with HF,CO2, and various amines

This investigation conducted reaction channels of weakly bound complexes CO₂…HF, CO₂…HF…NH₃, CO₂…HF…NH₂CH₃, CO₂…HF…NH(CH₃)₂, and CO₂…HF…N(CH₃)₃ systems, using the Gaussian 98 package at the B3LYP/6‐311++G(3df,2pd) level. The syn‐fluoroformic acid or syn‐fluoroformic acid plus NH₃ or amine conformers are more stable than the related anti‐fluoroformic acid or anti‐fluoroformic acid plus NH₃ or amine conformers. However, the above‐mentioned weakly bound complexes are more stable than both the related syn‐ and anti‐type fluoroformic acid or acid plus NH₃ or amine conformers and their related decomposed into CO₂ + HF or CO₂ + NHR₃F (R?H, CH₃) combined molecular systems. Five reaction channels of the weakly bound complexes exist. Each channel includes weakly bound complexes and their related above‐mentioned systems. Moreover, each reaction channel contains two transition states. The transition state between the weakly bound complex and anti‐fluoroformic acid type structure (T₁₃) is significantly higher than that of internal rotation (T₂₃) between syn‐ and anti‐FCO₂H (or FCO₂H…NR₃) structures. However, the above‐mentioned T₁₃ can significantly decrease its energy by adding the third molecule NH₃ or NR₃ (R?H or CH₃). The more CH₃ that is substituted in NR₃ of the reaction channel, the lower the activation energy of the transition state in the system is affected. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005